Bits and Sockets

View as Grid List

Sort by

Display items per page

3/8 Sq. Male Hex Extension X 2, Ball

AX EX-370-B-2

ADAPT 1/4 MALE HEX DR 3/8 SQ 2" OAL BALL
Male Hex Drive with 3/8" Male Square - Hex Extensions

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Made in the USA - Quality and Availability
Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.048 lb
Description: male hex to male sq

Hex Drive: 1/4 in

Magnetism: Non-Magnetic

Overall Length: 2.0 in, 51.0 mm
Set: No

$13.61

3/8 Male Sq. Drive Extension X 4, Pin

AX EX-376-4

EXT 3/8 SQ DR 3/8 SQ 4 OAL
3/8" Drive - 1 1/4" to 18" (32mm to 457mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.233 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 3/8 in

Overall Length: 4.0 in, 102.0 mm
Set: No

$30.96

3/8 Male Sq. Drive Extension X 6, Ball

AX EX-376-B-6

EXT 3/8" SQ DR 3/8" SQ 6" OAL BALL LOCK
3/8" Drive - 1 1/4" to 18" (32mm to 457mm) Length

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.344 lb
Description: Female sq. to Male sq.

Male Square Drive (in): 3/8 in

Overall Length: 6.0 in, 152.0 mm
Set: No

$36.46

3/8 Female Sq Drive Adapter x 1-1/2, Pin

AX EX-503

ADAPTR 3/8 SQ DR 1/2 SQ 1-1/2" OAL
3/8" Drive - 1/4" to 3/4" Male Square

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.112
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Pin Lock Feature Provides Best Retention, Ball Lock Feature Provides Quicker Changes

Weight: 0.116 lb
Description: Female sq. to Male sq.

Female Square (in): 3/8 in

Male Square Drive (in): 1/2 in

Overall Length: 1.5 in, 38.0 mm
Set: No

$25.49

1/4in Drive Socket

AX MX-1110

SCKT 1/4 SQ DR 5/16 HEX 1" OAL MAG
1/4" Drive - SAE - Magnetic, Standard Length, 6 Point

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Impact Rated, Meets or Exceeds Proof Torque Requirement for Impact Standard ASME B107.111
Made in the USA - Quality and Availability
High-Carbon Alloy Steel and Proprietary Heat Treat Process Yields Greater Strength and Longer Life
Cutting-edge Machining Process Allows Apex to Meet or Exceed Licensor Standards, Resulting in Tighter Tolerances and Superior Product Consistency
Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
Parts have a harder heat treat MX-1108-E has no lead-in chamfer

Weight: 0.040 lb
Diameter Drive End (C): 1/2 in
Diameter Nose End (B): 1/2 in

Hex Opening: 5/16 in
Magnetism: Magnetic

Opening Depth (D) (in): 3/16 in
Opening Modifier: 6 Point Hex

Overall Length A: 1 in
Set: No

$18.57

U-Guard 3/8 Sq Dr x 11mm Hex

AX UG-11MM23

SCKT CVRD 3/8 SQ DR 11MM HEX 50.8MM OAL
3/8" Drive Metric u-GUARD Non-Magnetic Covered Sockets

Weight: 0.020 lb

Drive End Sex: F
Drive End Type: Square
Drive Size: 3/8 in
Fastener End Sex: F
Fastener End Size: 11 mm
Fastener End Type: Hex

Magnetism: Non-Magnetic

Metal Socket Number: 11MM23
Opening Modifier: 6 Point Hex

Set: No

$85.85

U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm

AX UG-3214

U-Gurard Socket, 3/8 Fm Sq Dr. x 7/16 Fm

$74.97

1/2" Sq. Drive T40 Torx Socket Silver Cover Long With Drawing 12919SK1

MOM 4-T40RPL55

1/2" Sq. Drive T40 Torx Socket Silver Cover Long With Drawing 12919SK1

$144.49

FN 19MM

STR 809224

Flare Nut Interchangeable Heads for Torque Wrenches

Model	:	FN 19MM
Capacity	:	68 Nm
Dimensions Insert	:	19 mm

A	:	53.34 mm
B	:	33.02 mm
C	:	15.25 mm
D	:	25.40 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$121.76

OE 12Mm Open End Wrench Head Only

STR 809226

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-12 mm
Capacity	:	39
Dimensions Insert	:	12

A	:	48.26 mm
B	:	33.02 mm
C	:	10.16 mm
D	:	20.32 mm
E	:	17.78 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$109.60

Box Head BH-10mm, Head Only

STR 809230

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 10MM
Capacity	:	50 Nm
Dimensions Insert	:	10 mm

A	:	45.72 mm
B	:	15.24 mm
C	:	7.62 mm
D	:	20.32 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$111.33

Box Head BH-17mm Head Only

STR 809235

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 17MM
Capacity	:	163 Nm
Dimensions Insert	:	17 mm

A	:	50.8 mm
B	:	27.94 mm
C	:	12.7 mm
D	:	25.4 mm
E	:	22.86 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

Box Head BH 19mm

STR 809236

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 19MM
Capacity	:	203 Nm
Dimensions Insert	:	19 mm

A	:	53.34 mm
B	:	33.02 mm
C	:	15.24 mm
D	:	25.4 mm
E	:	22.86 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

FN 22MM

STR 809242

Flare Nut Interchangeable Heads for Torque Wrenches

Model	:	FN 22MM
Capacity	:	90 Nm
Dimensions Insert	:	22 mm

A	:	55.88 mm
B	:	38.1 mm
C	:	17.78 mm
D	:	33.02 mm
E	:	20.32 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$128.71

OE 8MM

STR 809292

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE-8 mm
Capacity	:	16
Dimensions Insert	:	8

A	:	43.18 mm
B	:	20.32 mm
C	:	7.62 mm
D	:	20.32 mm
E	:	17.78 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$104.38

Box Head BH-16 mm, Head Only

STR 809305

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 16MM
Capacity	:	141 Nm
Dimensions Insert	:	16 mm

A	:	50.8 mm
B	:	27.94 mm
C	:	12.7 mm
D	:	25.4 mm
E	:	22.86 mm

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

Open End OE-1/4 Head Only

STR 819000

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 1/4
Capacity	:	100 lbf in
Dimensions Insert	:	1/4 in

A	:	1.7 in
B	:	0.8 in
C	:	0.3 in
D	:	0.8 in
E	:	0.7 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$104.38

Open End OE-7/16 Head Only

STR 819003

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 7/16
Capacity	:	300 lbf in
Dimensions Insert	:	7/16 in

A	:	1.8 in
B	:	1.1 in
C	:	0.3 in
D	:	0.8 in
E	:	0.7 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$104.38

Open End OE-1-1/8 Head Only

STR 819014

Open End Interchangeable Heads for Torque Wrenches

Model	:	OE 1 1/8
Capacity	:	2500 lbf in
Dimensions Insert	:	1 1/8 in

A	:	2.3 in
B	:	2.3 in
C	:	0.5 in
D	:	1.3 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$135.69

FN, 1/2 Flare Nut Interchangeable Heads for Torque Wrenches, in.

STR 819029

Flare Nut Interchangeable Heads for Torque Wrenches

Model	:	FN 1/2
Capacity	:	300 lbf in
Dimensions Insert	:	1/2 in

A	:	1.9 in
B	:	1.0 in
C	:	0.4 in
D	:	0.9 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$121.76

Square Drive SD-1/4 Head Only

STR 819057

Square Drive Interchangeable Heads for Torque Wrenches

Model	:	SD 1/4
Capacity	:	250 lbf in
Dimensions Insert	:	1/4 in

A	:	0.25 in
B	:	1.7 in
C	:	0.6 in
D	:	0.8 in
E	:	0.8 in

Product Description

1 7 16 Common Centerline / 36.5 mm Common Centerline
819119: 3 7 8 Common Centerline / 984mm Common Centerline

$74.81

Box Head, 1/4

STR 819060

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 1/4
Capacity	:	250 lbf in
Dimensions Insert	:	1/4 in

A	:	1.7 in
B	:	0.5 in
C	:	0.3 in
D	:	0.8 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$111.33

Box Head 3/8

STR 819062

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 3/8
Capacity	:	450 lbf in
Dimensions Insert	:	3/8 in

A	:	1.8 in
B	:	0.6 in
C	:	0.3 in
D	:	0.8 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$111.33

Box Head BH-9/16 Head Only

STR 819065

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 9/16
Capacity	:	1050 lbf in
Dimensions Insert	:	9/16 in

A	:	1.9 in
B	:	1.0 in
C	:	0.8 in
D	:	0.9 in
E	:	0.8 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55

Box Head BH-5/8 Head Only

STR 819066

Box Head Interchangeable Heads for Torque Wrenches

Model	:	BH 5/8
Capacity	:	1250 lbf in
Dimensions Insert	:	5/8 in

A	:	2.0 in
B	:	1.1 in
C	:	0.5 in
D	:	1.0 in
E	:	0.9 in

Product Description

One piece, cast, proprietary steel selection
All of our heads fit on all of our wrenches
Our smallest head fits on our largest wrench
Our largest head fits on our smallest wrench
Fewer wrenches to buy, calibrate, repair, and manage
No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
Sturtevant Richmont interchangeable heads have two common centerlines
Typically for sizes 32 mm and below the common centerline is 365 mm
Sizes larger than 33 mm the common centerline extends to 984 mm

$116.55