Torque Control

Sort by

Display items per page

Exacta 2 Torque Wrench, 400Ft/Lbs

STR 10535

Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb

Product Group	:	Exacta 2 Digital Torque Wrench, ft-lb
Model	:	Exacta 2 400
Capacity (Nm)	:	543 Nm
Torque Range (ft.lb)	:	80-400 ft.lbf
Overall Length	:	35.9 in
Head Type	:	Pin and Spring

Product Description

Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Residual mode assists the user in determining retained torque on a joint
Actual accuracy percentage is contingent upon the joint condition and user technique
Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
Large, bright display can be read at arm's length, even in shadow
Three modes of operation: Track, Peak, and Residual
Programmable limits with visual notification

$2,283.83

1100 Series Exacta 2 250 DT

STR 10578

Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Group	:	1100 Series Exacta 2 Digital Torque Wrench, ft-lb
Model	:	1100-Series Exacta 2 250 DT
Capacity (Nm)	:	338.9 Nm
Torque Range (ft.lb)	:	50-250 ft.lbf
Head Type	:	Pin/Spring

Product Description

Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
Batteries and Charger not included
Includes a lightweight and rugged blow-molded storage/carrying case
Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!

$2,736.51

Exacta II 1100 Series 400

STR 10580

Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Group	:	1100 Series Exacta 2 Digital Torque Wrench, ft-lb
Model	:	Exacta II 1100 Series 400
Capacity (Nm)	:	542 Nm
Torque Range (ft.lb)	:	80-400 ft.lbf
Head Type	:	Pin/Spring

Product Description

Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
Batteries and Charger not included
Includes a lightweight and rugged blow-molded storage/carrying case
Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!

$3,219.43

1100 Series Exacta 600 R

STR 10585

Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Group	:	1100 Series Exacta 2 Digital Torque Wrench, ft-lb
Model	:	1100-Series Exacta 600 R (3/4 in Square Drive)
Capacity (Nm)	:	813 Nm
Torque Range (ft.lb)	:	120-600 ft.lbf
Head Type	:	Racheting

Product Description

Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
Batteries and Charger not included
Includes a lightweight and rugged blow-molded storage/carrying case
Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!

$3,702.34

Exacta II 1250 Series 250

STR 10655

Wireless Digital Torque Wrenches: 1250 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Group	:	1250 Series Exacta 2 Digital Torque Wrench, ft-lb
Model	:	Exacta II 1250 Series 250 R (1/2 inch Square Drive)
Torque Range (ft.lb)	:	50-250 ft.lbf
Overall Length	:	25.2 in
Head Type	:	Racheting

Product Description

Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
Torque and angle can identify changing joint conditions and prevent errors
Backlit display is easy to read in any light condition
Customizable color display change to inform the operator
Display lights upon torque application
Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
Tool emits reject tone upon reaching maximum torque
Compatible with the Global 400 and Global 400m
P-Sets are set and saved via the controller, no changes can be made at the wrench level
Provides you with another level of error proofing by preventing inadvertent changes
Can be used with the Patented Holding Tool Series
Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models

$3,890.73

DTC-250 Digital Torque Wrench, Interchangable Head, 3000 in Lbs

STR 10684

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Group	:	DTC Digital Torque and Angle Wrench, ft-lb
Model	:	DTC-250
Capacity (Nm)	:	338.9 Nm
Capacity (in-lb)	:
Torque Range (ft.lb)	:	50-250 ft.lbf
Overall Length	:	30 in
Head Type	:	Dovetail Pin/Spring

Product Description

Limiting torque value to wrench capacity
Black and white display and colored light bands on the side of the wrench
Bands change yellow to green when the target values are achieved
Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
Results log large enough for even the busiest assemblies
Holds 1000 torque results and results can be downloaded
Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
Can be used to set parameters in the wrench
Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
DTC CONNECT is freeware and is included in the DTC

$1,271.96

DTC-80 Digital Torque Wrench

STR 10686

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Group	:	DTC Digital Torque and Angle Wrench, ft-lb
Model	:	DTC-80
Capacity (Nm)	:	108.47 Nm
Capacity (in-lb)	:
Torque Range (ft.lb)	:	16-80 ft.lbf
Overall Length	:	18.61 in
Head Type	:	Dovetail Pin/Spring

Product Description

Limiting torque value to wrench capacity
Black and white display and colored light bands on the side of the wrench
Bands change yellow to green when the target values are achieved
Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
Results log large enough for even the busiest assemblies
Holds 1000 torque results and results can be downloaded
Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
Can be used to set parameters in the wrench
Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
DTC CONNECT is freeware and is included in the DTC

$1,271.96

Torq-Tronics 2 Digital Torque Tester, 250Ft-Lb

STR 10697

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Model	:	TORQ-TRONICS 2 250 FT LB (3/4 in)
Torque Range (ft-lb)	:	25-250 lbf-ft
Torque Range (nm)	:	33.9-339 Nm

Product Description

Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
Meets or exceeds requirements of ASME B107.300-2010
Tests in both clockwise and counterclockwise directions
Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
Units of measure include English, Standard International, and metric
Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
Runs on four AA NiMH rechargeable batteries
Batteries are sold separately
Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
Includes a free blow-molded plastic box for storage and transit
Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
One end of the strap is screwed into the power outlet where your test instrument is plugged in
Other end of the strap attaches to the base of your test instrument
Anti-static strap is an integral part of your calibration instrument operation and is required for operation
10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780

$3,259.60

1350 Exacta 5

STR 10780

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Group	:	1350 Series Digital Torque and Angle Wrench, ft-lb
Model	:	1350 Series Exacta 2-5
Capacity (Nm)	:	6.7 Nm
Torque Range (ft.lb)	:	1-5 ft.lbf
Overall Length	:	13.13 in
Head Type	:	Pin/Spring

Product Description

Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
Torque and angle can identify changing joint conditions and prevent errors
The torque-only functionality includes Track and Peak modes of operation
The backlit display is easy to read in any light condition
Customizable color display change to inform the operator
Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
Tool emits reject tone upon reaching maximum torque
Compatible with the Global 400 and Global 400mp
P-Sets are set and saved via the controller
No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
Can be used with the Patented Holding Tool Series

$3,332.70

1350 Exacta - 75 QC

STR 10788

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Group	:	1350 Series Digital Torque and Angle Wrench, ft-lb
Model	:	1350 Series Exacta 2-75 QC
Capacity (Nm)	:	101.7 Nm
Torque Range (ft.lb)	:	15-75 ft.lbf
Overall Length	:	16.5 in
Head Type	:	Quick Change

Product Description

Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
Torque and angle can identify changing joint conditions and prevent errors
The torque-only functionality includes Track and Peak modes of operation
The backlit display is easy to read in any light condition
Customizable color display change to inform the operator
Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
Tool emits reject tone upon reaching maximum torque
Compatible with the Global 400 and Global 400mp
P-Sets are set and saved via the controller
No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
Can be used with the Patented Holding Tool Series

$3,332.70

Exacta 1350-25 AA

STR 10981

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Group	:	1350 Series Digital Torque and Angle Wrench, ft-lb
Model	:	1350 Series Exacta 2-25 AA
Capacity (Nm)	:	33.9 Nm
Torque Range (ft.lb)	:	5-25 ft.lbf
Overall Length	:	14.88 in
Head Type	:	Pin/Spring

Product Description

Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
Torque and angle can identify changing joint conditions and prevent errors
The torque-only functionality includes Track and Peak modes of operation
The backlit display is easy to read in any light condition
Customizable color display change to inform the operator
Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
Tool emits reject tone upon reaching maximum torque
Compatible with the Global 400 and Global 400mp
P-Sets are set and saved via the controller
No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
Can be used with the Patented Holding Tool Series

$3,255.56

CAL 36/4 Euro/Micometer Adj. Torque Screwdriver

STR 810017

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver, Nm

Product Group	:	Adjustable Torque Screwdriver, Nm
Model	:	CAL 36/4 Euro
Torque Range	:	0.2-4.06 Nm
Hex Drive	:	1/4 in
Overall Length	:	7.8 in
Weight	:	.5 lb
Scale	:	0.2 Nm

Product Description

Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
Meets or exceeds ASME B107.300-2010 and ISO 6789
Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
Magnifying lens improves the view of a clearly engraved scale
To operate, simply dial torque setting and insert bit
Anti-backlash design enhances repeatability
Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

$391.97

SLTC FM2.4 50 I A3, Torque Wrench

STR 810411

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Group	:	SLTC FM 2.4 GHZ Click Wrenches, in-lb
Model	:	SLTC FM2.4 50 I A3
Torque Range (Nm)	:	6 Nm
Torque Range (in.lb)	:	10-50 in.lb
Head Type	:	Dovetail

Product Description

Preset click torque wrench measures and applies torque in the clockwise direction
Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
Flattened case for superior accuracy, reliability, and durability
Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Excellent audible/tactile impulse when preset torque is achieved
Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
Raised LED Fresnel to improve visibility when working in less than optimal positions
AAA batteries are more readily available than are the 6-volt batteries

$1,143.76

Wrench, SLTCR FM2.4 750 I A3

STR 810423

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Group	:	SLTC FM 2.4 GHZ Click Wrenches, in-lb
Model	:	SLTCR-2.4FM-750I-A3
Torque Range (Nm)	:	84.73 Nm
Torque Range (in.lb)	:	150-750 in.lb
Head Type	:	Ratcheting

Product Description

Preset click torque wrench measures and applies torque in the clockwise direction
Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
Flattened case for superior accuracy, reliability, and durability
Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Excellent audible/tactile impulse when preset torque is achieved
Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
Raised LED Fresnel to improve visibility when working in less than optimal positions
AAA batteries are more readily available than are the 6-volt batteries

$1,181.38

Screwdriver, P20-2H

STR 810502

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Group	:	Preset Torque Driver P Series, in-lb
Torque Range	:	4-20 in.lb
Hex Drive	:	1/4 in
Weight	:	.5 lb

Product Description

Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
Torque can be set to any unit of measure
Be sure to use a calibrated torque tester to set the torque value
Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
Bi-directional versatility - preset same value for both CW and CCW measurement
1/4" Female Hex drive uses power bits and insert bits
Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
Anti-backlash design for ergonomic comfort
Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
Sliding T Handle assists in turning the driver at higher torque values
Well balanced tool that feels great in your hand

$229.45

Screwdriver, P40-2H

STR 810503

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Group	:	Preset Torque Driver P Series, in-lb
Torque Range	:	8-40 in.lb
Hex Drive	:	1/4 in
Weight	:	.5 lb

Product Description

Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
Torque can be set to any unit of measure
Be sure to use a calibrated torque tester to set the torque value
Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
Bi-directional versatility - preset same value for both CW and CCW measurement
1/4" Female Hex drive uses power bits and insert bits
Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
Anti-backlash design for ergonomic comfort
Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
Sliding T Handle assists in turning the driver at higher torque values
Well balanced tool that feels great in your hand

$253.49

6SDR-700 Adjustable Torque Wrench

STR 810525

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Group	:	SDR Series Micrometer Adjustable Click Wrench, ft-lb
Model	:	6 SDR 700
Torque Range (ft.lb)	:	100-700 lbf ft
Scale (lb)	:	5 lbf ft
Square Drive	:	3/4 in
Weight (lb)	:	16.5 lb

Product Description

Adjust torque value by rotating the grip
Grip lock makes locking in torque value fast, easy, and secure
Tool changees from one end of the scale to the other with the fewest number of turns
Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
Flattened case prevents side loading during torque application or testing/calibration
Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
Ratchet is built for durability
Ratchet replacement is fast and easy when needed
All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

$1,898.48

6SDR-600 Adjustable Torque Wrench

STR 810597

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Group	:	SDR Series Micrometer Adjustable Click Wrench, ft-lb
Model	:	6 SDR 600
Torque Range (ft.lb)	:	100-600 lbf ft
Scale (lb)	:	5 lbf ft
Square Drive	:	3/4 in
Weight (lb)	:	10.5 lb

Product Description

Adjust torque value by rotating the grip
Grip lock makes locking in torque value fast, easy, and secure
Tool changees from one end of the scale to the other with the fewest number of turns
Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
Flattened case prevents side loading during torque application or testing/calibration
Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
Ratchet is built for durability
Ratchet replacement is fast and easy when needed
All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

$1,845.25

CCM 400 NM

STR 810788

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

Product Group	:	CCM Micrometer Adjustable Click Wrenches, Nm
Model	:	CCM 400 NM
Torque Range (Nm)	:	75-400 Nm
Scale (Nm)	:	2.5 Nm

Product Description

Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
SR Dovetail connects with all of our interchangeable heads
Every one of our interchangeable heads fits on every one of our wrenches
No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
Knurl Grip handle is rugged and comfortable in your hand for long periods of time
Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

$1,259.74

IDW-150 Dial Torque Wrench

STR 815704

Beam & Dial Torque Wrenches: Dial Torque Wrenches, ft-lb

Product Group	:	Dial Torque Wrenches, ft-lb
Model	:	IDW 150 FINAL ASSY
Torque Range	:	30-50 lbf ft
Scale	:	2 lbf ft
Weight	:	2.8 lb
OAL	:	20.8 in

Product Description

Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
Meets or exceeds ASME B107.300-2010 and ISO 6789
Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
Glare-resistant dial cover makes it easy to read in difficult light conditions
Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
Heavy-duty dial guard protects against breakage
Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
Each wrench comes in its own rugged, blow-molded, storage case
FREE NIST-traceable tabulated certification included.

$466.15

1/2Dr Dial Torque Wrench 50-250 Ft Lb

STR 815705

Beam & Dial Torque Wrenches: Dial Torque Wrenches, ft-lb

Product Group	:	Dial Torque Wrenches, ft-lb
Model	:	IDW 250 FINAL ASSY
Torque Range	:	50-250 lbf ft
Scale	:	5 lbf ft
Weight	:	2 lb
OAL	:	20.8 in

Product Description

Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
Meets or exceeds ASME B107.300-2010 and ISO 6789
Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
Glare-resistant dial cover makes it easy to read in difficult light conditions
Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
Heavy-duty dial guard protects against breakage
Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
Each wrench comes in its own rugged, blow-molded, storage case
FREE NIST-traceable tabulated certification included.

$516.15

Torque Wrench, M 25 I, 25 Inch Lbs

STR 850222

Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

Product Group	:	Flat and Tapered Beam Torque Wrenches, in-lb
Model	:	M 25 I
Torque Scale	:	25 lbf in
Square	:	1 lbf in
Weight	:	0.4 lb

Product Description

Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
Peak torque indicated on the scale is accurate even in destructive applications
Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
850222, 850242, 850191: These products have a pivoted ball handle.

$506.48

Flat Beam Torque Wrench, 3/8in Sq. Dr.

STR 850246

Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

Product Group	:	Flat and Tapered Beam Torque Wrenches, in-lb
Model	:	M 600 I 3/8
Torque Scale	:	600 lbf in
Square	:	25 lbf in
Weight	:	2.75 lb

Product Description

Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
Peak torque indicated on the scale is accurate even in destructive applications
Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
850222, 850242, 850191: These products have a pivoted ball handle.

$814.55

Flat Beam M Series Torque Wrench 1/2 In Square Drive

STR 850247

Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-lb

Product Group	:	Flat and Tapered Beam Torque Wrenches, in-lb
Model	:	M 600 I 1/2
Torque Scale	:	600 lbf in
Square	:	25 lbf in
Weight	:	2.75 lb

Product Description

Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
Peak torque indicated on the scale is accurate even in destructive applications
Meets or exceeds requirements for ASME B107, 300-2010 and ISO 6789
Includes certificate of calibration from our +/- 25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory
850222, 850242, 850191: These products have a pivoted ball handle.

$821.02

M 80 IO

STR 850254

Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, in-oz

Product Group	:	Flat and Tapered Beam Torque Wrenches, in-oz
Model	:	M 80 IO
Torque Scale	:	5 ozf.in
Square	:	1/4 in
Weight	:	0.25 lb

Product Description

Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
Peak torque indicated on the scale is accurate even in destructive applications
Bi-directional accuracy of +/-2% of indicated value from 20% to 100% of capacity
Meets or exceeds requirements for ASME B107 .300-2010 and ISO 6789
Includes certificate of calibration from our +/- .25% indicated value accuracy/ISO/IEC 17025 accredited calibration laboratory

$488.73

Refine