Airpower | Spray Guns

Satajet 5000 B Hvlp 1.4 Spray Gun

SATA 210799

Satajet 5000 B Hvlp 1.4 Spray Gun

Call for pricing

SATA 210823

Sata Jet 5000 With 1.5 Tip

Call for pricing

SATA 48173

Gun Grease

Call for pricing

Airpro Gun, Wb, Compliant, .030

GG 288970

AIRPRO GUN, WB, COMPLIANT, .030

Graco 288970 AirPro Air Spray Pressure Feed Gun, Compliant, 0.030 inch (0.8 mm) Nozzle, for Waterborne Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Waterborne
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.08
Fluid Orifice Size (in): 0.030
Fluid Orifice Size (mm): 0.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

Call for pricing

XTR+ GUN, XTR5+, 1"HND, 4FNG, FLAT TIP

GG XTR521

XTR+ GUN, XTR5+, 1"HND, 4FNG, FLAT TIP

XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you'll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer. Designed to conquer the toughest protective coatings. Self-locking needle design for faster rebuilds Flat tip provides exceptional life, pattern and finish Easily remove and clean gun filter with trigger guard integrated wrench XTR5+ maximum fluid pressure: 5000psi (345 bar, 34.5 MPa)

$534.00

Gun, 500, 2 Finger, Asm, Packaged

GG 289316

Gun, 500, 2 Finger, Asm, Packaged

$303.00

CONTRACTOR PC COMPACT GUN, LTX, PKGD

GG 19Y349

CONTRACTOR PC COMPACT GUN, LTX, PKGD

Contractor PC Compact Airless Spray Gun with RAC X 517 SwitchTip The Contractor PC Compact airless spray gun provides all-day comfort and control, fast on-the-job gun rebuild capability and industry-proven Graco durability. Spray longer with 25% lighter weight and 25% smaller size than the Contractor gun with a 50% lighter trigger pull force. Compact design delivers maximum flexiblity for every application. The RAC X 517 SwitchTip provides a 10 inch spray pattern that is ideal for larger surfaces such as houses/buildings, walls and ceilings. Finish Jobs Faster with Less Fatigue

Delivers the most comfortable and lightest-weight spray experience ever
Lightest trigger pull force at all spray pressures
Lightest trigger hold force at all spray pressures

Exclusive ProConnect Replacement Cartridge

1-part, on-the-job gun rebuild
Needle and all wear parts in one simple part
Simply replace cartridge — it's like getting a brand new gun

Easy one-finger, ambidextrous trigger lock Comfortable, contoured compact handle design EasyGlide Swivel for effortless hose management

$575.00

STELLAIR GUN, CONV (.030)

GG 2004146

STELLAIR GUN, CONV (.030)

Stellair Air Spray Gun, Conventional, 0.030 in (0.8 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

STELLAIR GUN, CONV (.042)

GG 2004147

STELLAIR GUN, CONV (.042)

Stellair Air Spray Gun, Conventional, 0.042 in (1.1 mm), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter’s hand.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

STELLAIR GUN, CONV (.086)

GG 2004149

STELLAIR GUN, CONV (.086)

Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

Conventional is the traditional air spray method, producing Class A, automotive finish quality.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Swivel and hose move with you at any angle, preventing tripping and injury.

Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$473.00

STELLAIR GUN, HVLP (.042)

GG 2004151

STELLAIR GUN, HVLP (.042)

Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), General Industry, PEEK Tip Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

Whether you’re a custom shop or a high volume manufacturing facility, Stellair brings industry leading finish quality to these and other applications: automotive, metal, plastic, and wood.

High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.

General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.

Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.

Swivel and hose move with you at any angle, preventing tripping and injury.

One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.

Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

$630.00

STELLAIR GUN, HVLP (.070)

GG 2004153

STELLAIR GUN, HVLP (.070)

Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), General Industry, PEEK Tip