Piston
MERKUR SPRAYER, ES, AA, 30:1, CS, STAND
GG 24F157
GG 24F157
MERKUR SPRAYER, ES, AA, 30:1, CS, STAND
30:1 Merkur ES Air Assisted Package, 0.4 gpm (1.5 lpm) fluid flow, standard mount, with PerformAA 50 gun, suction hose, and plated steel The Merkur ES is one of the most efficient sprayers designed to use less material than the competition and to reduce air usage and pulsation. Quick flush system requires less than 1 minute to flush 45% less material to fill the system than the leading competitors Delivers a superior, consistent spray finish Low profile spray package makes it easy to transport Easily set and monitor air control, plus an integrated carrying handle for transport Air motor provides consistent finishes with smooth, rapid changeover Suction hose and strainer leaves less material in the supply container Lightweight, flexible 1/8 in fluid hose reduces material and solvent usage
$3,900.00
MERKUR SPRAYER, ES, AA, 15:1, SST, WAL
GG 24F158
GG 24F158
MERKUR SPRAYER, ES, AA, 15:1, SST, WAL
Graco 24F158 15:1 Merkur ES Air Assisted Package, 0.4 gpm (1.5 lpm) fluid flow, wall mount, with PerformAA 15 gun, suction hose, and stainless steel
The Merkur ES is one of the most efficient sprayers designed to use less material than the competition and to reduce air usage and pulsation.
- Quick flush system requires less than 1 minute to flush
- 45% less material to fill the system than the leading competitors
- Delivers a superior, consistent spray finish
- Easily set and monitor air control, plus an integrated carrying handle for transport
- Air motor provides consistent finishes with smooth, rapid changeover
- Suction hose and strainer leaves less material in the supply container
- Lightweight, flexible 1/8 in fluid hose reduces material and solvent usage
- Model: Merkur
- Series: ES
- Convertible: Non-Convertible
- Fluid Outlet Size (cm): 0.635
- Fluid Outlet Size (in): 1/4
- Fluid Outlet Size (mm): 6.35
- Fluid Outlet Thread Type: NPSM
- Gun Included: 1
- Gun Model: G15
- Gun Technology: Air-Assisted
- Gun Type: Air-Assisted
- Hose Inlet Diameter (cm): 0.3175
- Hose Inlet Diameter (in): 0.125
- Hose Inlet Diameter (mm): 3
- Includes: G15 Gun, Suction Hose, Wall Mount
- Maximum Flow Rate (GPM): 0.4
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.6
- Maximum Sound Pressure Level (dB(A)): 76.5
- Maximum Tip Size (cm): 0.0483
- Maximum Tip Size (in): 0.019
- Maximum Tip Size (mm): 0.4826
- Maximum Working Pressure (bar): 103
- Maximum Working Pressure (kPa): 10300
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Motor Type: Pneumatic
- Mount Type: Wall Mount
- Number of Guns: 1
- Power Source: Air
- Pressure Type: High Pressure
- Product Type: Spray Package
- Pump Ratio: 15:1
- Pump Sleeve Material: Stainless Steel
- Pump Type: Pneumatic Piston Pump
$3,960.00
MERKUR M2K SPRAYER, AS, 4:1, CART
GG 24V871
GG 24V871
MERKUR M2K SPRAYER, AS, 4:1, CART
Graco 24V871 4:1 M2K Air Spray Mechanical Proportioner Package, cart mount, AirPro gun and standard mix manifold
Upgrade from hand mixing to the efficient M2K mechanical sprayer. M2K Air Spray is ideal for low-pressure applications where a high quality finish is required.
- Increase mix material accuracy to improve finish quality and reduce material waste, compared to hand mixing
- Compact size makes it faster and easier to flush, saving you time and disposal costs
- Ideal for lower volume two component epoxy, polyurethane and polyester materials
- Component Type: Two Component
- Fluid Hose Inside Diameter (in): 0.25
- Fluid to Air Ratio: 3.2:1
- Gun Activation: Manual
- Includes: AirPro Gun, Standard Mix Manifold
- Material Type: Two Component
- Maximum Air Pressure (bar): 5
- Maximum Air Pressure (kPa): 50
- Maximum Air Pressure (psi): 75
- Maximum Flow Rate (GPM): 0.7
- Maximum Flow Rate (L/min): 2.5
- Maximum Hose Length (ft): 25
- Maximum Hose Length (m): 7.5
- Maximum Number of Colors: 1
- Maximum Working Pressure (bar): 15
- Maximum Working Pressure (kPa): 1500
- Maximum Working Pressure (psi): 225
- Mix Ratio: 4:1
- Mount Type: Cart Mount
- Number of Color Valves: N/A
- Proportioner Type: Mechanical
- Proportioning Type: Manual Mechanical
- Pump Lower A Size (cc): 100
- Pump Lower B Size (cc): 25
$18,860.00
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
GG 24W473
GG 24W473
HYDRA-CLEAN SYSTEM, AIR, 30:1, CART
Graco 24W473 Hydra-Clean® 30:1 Cart Mount Pneumatic Pressure Washer Package with Hose Reel
Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Graco’s NXT air motor, it&prime, s ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.
Application: Ideal for heavy duty cleaning and maintenance for industrial and sanitary applications- Great for high pressure cleaning and sanitizing
- Fits most pressure, flow and material requirements
- Use with open-head universal drums
- Spray down portability for use in sanitary applications
- Supports multiple guns
- Efficient cleaning with water, detergent or chemical solutions
- Model: Hydra-Clean
- Air Inlet Size (cm): 1.905
- Air Inlet Size (in): 3/4
- Air Inlet Size (mm): 19.05
- Air Inlet Thread Type: NPT
- Includes: Hose Reel
- Maximum Flow Rate (GPM): 7
- Maximum Flow Rate (L/min): 26
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Fluid Flow Rate @ 60 CPM (GPM): 6.8
- Maximum Fluid Flow Rate @ 60 CPM (L/min): 25.9
- Maximum Working Pressure (bar): 211
- Maximum Working Pressure (kPa): 21130
- Maximum Working Pressure (MPa): 21.1
- Maximum Working Pressure (psi): 3065
- Motor Series: NXT Air Motor
- Mount Location: Cart Mount w/ Hose Reel
- Mount Type: Cart Mount w/ Hose Reel
- Power Type: Pneumatic
- Pump Ratio: 30:1
- Pump Type: Dura-Flo 1800 Pump
$27,120.00
XP SYSTEM, 1:1, 90/90, BF, CH
GG 571102
GG 571102
XP SYSTEM, 1:1, 90/90, BF, CH
XP70 Cart System, Hazardous Location, 1:1 Bare, 240VThe Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high-viscosity, high-solids coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you'll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent.
High-pressure performance for two-part high-solids coatings. Reduced material waste No more throwing away unused mixed material at the end of the day Save money by using less clean-up solvent Consistent material quality - no more guesswork or human error in measuring materials Easy to operate - minimal training required Reduced maintenance costs Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths
$28,620.00
Merkur Pump, Assembly, 30:1, 25Cc, Ss, Std
GG W30AAS
GG W30AAS
Merkur Pump, Assembly, 30:1, 25Cc, Ss, Std
$4,540.00
Afx 5 Gal Ram Package Sp0443S21Gn47E52
AA SP0443S21GN47E52
AA SP0443S21GN47E52
Afx 5 Gal Ram Package Sp0443S21Gn47E52
$10,958.00
PUMP BODY 4 PISTON
EP 44917E
EP 44917E
PUMP BODY 4 PISTONElectric Pump Wheeled Cylinder (PR-Series and equivalent)
- Type: Service Kit
- SubTypes: Piston Kit
$878.50
Kit, Sub Assembly, Piston, Motor, 7.5
GG 16G515
GG 16G515
Kit, Sub Assembly, Piston, Motor, 7.5
$554.00
Pump, President, Open, CS, 3:1
GG 17E227
GG 17E227
PRESIDENT PUMP,OPEN,CS,3:1
Graco 17E227 3:1 President 4-Ball Pneumatic Pump, 750 cc, Open CS Lower, 460 psi (32 bar) Max Working Pressure, NPT, Standard Pump Length
Graco's high volume circulating pumps will allow you to handle large flow requirements while operating at low cycle rates. The pump lower requires fewer cycles per gallon and longer intervals between seal replacement, lowering your overall cost of ownership.
- Excellent abrasion and corrosion resistance with large porting for excellent priming and handling of high viscosity fluids
- Stainless steel and carbon steel wetted parts for a wide range of fluids
- Model: President
- Series: 4-Ball
- Air Inlet Size (in): 0.5
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Circulation
- Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set
$9,420.00
Hydra-Cat Fixed Ratio Pump, Pres, Pl Comp (1:1 Mix)
GG 207914
GG 207914
Hydra-Cat Fixed Ratio Pump, Pres, Pl Comp (1:1 Mix)
Call for pricing
LUBRICATOR, SYS # 35, 5 GAL
GG 222078
GG 222078
LUBRICATOR, SYS # 35, 5 GAL
Fire-Ball® 300 Series 15:1 Grease Pump Package - Stationary Pail Dispenser As the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently. Install the Fire-Ball 300 15:1 in high pressure, medium volume undercoating and rust-proofing applications such as automotive dealerships, fast lube centers, and service shops. Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense. Durable - Thick cast aluminum air motor housing offers unmatched durability. Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost. Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life. Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process. Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing. Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
$2,870.00
Pump Lower
GG 223177
GG 223177
PUMP, DISPL, RECIP
Graco 223177 Displacement Pump, Carbon Steel, UHMWPE and Leather Packed Pump
$3,980.00
Fluid Section
GG 223587
GG 223587
PUMP, DISP, RECIP
Graco 223587 Displacement Pump Assembly for 30:1 President, 15:1 Monark and Viscount I 3000 Pumps
$3,780.00