Parts

View as Grid List

Sort by

Display items per page

KIT, ACCESSORY, HAZ I/O CABLE

GG 25V080

KIT, ACCESSORY, HAZ I/O CABLE

Graco 25V080 QUANTM Pump Input/Output (I/O) Cable

For use with QUANTM electric double diaphragm pumps that are certified for use in explosive athospheres or hazardous (classified) locations.

For Use With: QUANTM Electric Double Diaphragm Pump

Includes: 1 cable clamp assembly, 2 clamp fasteners, 1 ground fastener
Maximum Operating Temperature (°C): 40
Maximum Operating Temperature (°F): 104
Minimum Operating Temperature (°C): -20
Minimum Operating Temperature (°F): -4

$199.00

MAGNUM SPRAYER, X7

GG 262805

MAGNUM SPRAYER, X7

Magnum X7 Electric TrueAirless Sprayer DIY homeowners and handymen will save time and money with the Magnum X7 with built-in cart. Tackle any interior project, exterior houses, fences and decks. The X7 supports a larger tip size for spraying heavier coatings and the convenient cart makes any painting project faster and easier. Hardened Stainless Steel Piston Pump - Delivers high pressure power to spray unthinned paints Flexible Suction Hose - Spray directly from 1 or 5 gallon paint container Convenient Cart - Easily move sprayer around on the job Paint Saver Pail Hook - Effortlessly move 5 gallon paint container with cart TrueAirless Spray Tip with SoftSpray Technology - greater control and less overspray with a wide range of coatings Power Flush Adapter - Connects to a garden hose for fast and easy cleaning PushPrime - Fast and reliable start-up every time Adjustable Pressure Control - Easy control of paint flow

$770.00

CONTRACTOR FLAT TIP, SPRAY

GG 269213

CONTRACTOR FLAT TIP, SPRAY

Contractor Flat Tip, 213 The 213 Contractor Flat Tip is designed for narrower surfaces. The 213 Flat Tip has a 0.013 inch orifice and produces a 4 to 6 inch fan.

$11.40

CONTRACTOR FLAT TIP, SPRAY 317

GG 269317

CONTRACTOR FLAT TIP, SPRAY 317

Contractor Flat Tip, 317 The 317 Contractor Flat Tip is designed for narrow surfaces. The 317 Flat Tip has a 0.017 inch orifice and produces a 6 to 8 inch fan.

$11.40

CONTRACTOR FLAT TIP, SPRAY

GG 269621

CONTRACTOR FLAT TIP, SPRAY

Graco 269621 Contractor Flat Tip, 621

The 621 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.021 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: Airless Spray Gun
Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Orifice Diameter (in): 0.021

$11.40

CONTRACTOR FLAT TIP, SPRAY 627

GG 269627

CONTRACTOR FLAT TIP, SPRAY 627

Contractor Flat Tip, 627 The 627 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.027 inch orifice.

$11.40

CONTRACTOR FLAT TIP, SPRAY 631

GG 269631

CONTRACTOR FLAT TIP, SPRAY 631

Contractor Flat Tip, 631 The 631 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.031 inch orifice.

$11.40

CONTRACTOR FLAT TIP, SPRAY 717

GG 269717

CONTRACTOR FLAT TIP, SPRAY 717

Graco 269717 Contractor Flat Tip, 717

The 717 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.017 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Architectural Coating
For Use With: Silver Plus Airless Spray Gun
Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406
Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17
Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000
Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356
Orifice Diameter (in): 0.017
Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$11.40

CONTRACTOR FLAT TIP, SPRAY 719

GG 269719

CONTRACTOR FLAT TIP, SPRAY 719

Contractor Flat Tip, 719 The 719 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.019 inch orifice.

$11.40

CONTRACTOR FLAT TIP, SPRAY 819

GG 269819

CONTRACTOR FLAT TIP, SPRAY 819

Contractor Flat Tip, 819 The 819 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.019 inch orifice.

$11.40

CONTRACTOR FLAT TIP, SPRAY

GG 269827

CONTRACTOR FLAT TIP, SPRAY

Contractor Flat Tip, 827 The 827 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.027 inch orifice.

$11.40

PANEL, FLUID, WATER/ANTIFREEZE

GG 26A130

PANEL, FLUID, WATER/ANTIFREEZE

Graco 26A130 ProDispense Fluid Panel Kit, Water Meter, light viscosity, average resolution

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for water and antifreeze applications.

Application: For water and antifreeze applications

Turbine meter is compatible with water and antifreeze.

Model: ProDispense

$9,090.00

KIT, PD3K REMOTE MAN, DVM LP

GG 26C288

KIT, PD3K REMOTE MAN, DVM LP

ProMix PD2K Three-port Low Pressure Remote Mix Manifold Kit

Manifold 26C288 is only used with the ProMix PD3K+ system

$3,830.00

SD SERIES SDP8 VALVE, FC, 1/2NPT, GL

GG 26C358

SD SERIES SDP8 VALVE, FC, 1/2NPT, GL

Graco 26C358 SDP8 Series Electronic Preset Gear Lube Meter - Rigid Extension - 1/2 in. (13 mm) Inlet

Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.

Upgradeable—SD Preset meters are compatible with PULSE FC fluid control system
Large, Intuitive Display—high-contrast display for low and bright light conditions
Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
Reliable—time-tested Graco engineering
Durable—Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
Long battery life—uses 4 AA easy-to-replace batteries

Model: SDP8

Compatible Material: Gear Oil, Oil, ATF
Dispense Type: Preset
Display Type: Electronic
Extension Type: Rigid
Fluid Inlet Thread Gender: Female
Fluid Outlet Thread Gender: Female
Includes: Nozzle, Gear Lube Extension
Inlet Size (cm): 1.27
Inlet Size (in): 1/2
Inlet Size (mm): 12.7
Inlet Thread Type: NPT
Maximum Flow Rate (GPM): 8
Maximum Flow Rate (L/min): 30
Maximum Operating Temperature (°C): 70
Maximum Operating Temperature (°F): 158
Maximum Recorded Dispense: 9999
Maximum Storage Temperature (°C): 70
Maximum Storage Temperature (°F): 158
Maximum Working Pressure (bar): 103.4
Maximum Working Pressure (kPa): 10340
Maximum Working Pressure (MPa): 10.3
Maximum Working Pressure (psi): 1500
Meter Accuracy (%): ±0.5
Meter Technology: Oval Gear
Metering Gun Weight (kg): 2.4
Metering Gun Weight (lb): 5.3
Minimum Flow Rate (GPM): 0.25
Minimum Flow Rate (L/min): 0.9
Minimum Operating Temperature (°C): -16
Minimum Operating Temperature (°F): 4
Nozzle Type: Manual
Outlet Thread Type: Straight Thread O-Ring Boss
Overall Height (cm): 14.6
Overall Height (in): 5.75
Overall Height (mm): 146
Overall Length (cm): 33
Overall Length (in): 13
Overall Length (mm): 330
Overall Width (cm): 9.5
Overall Width (in): 3.75
Overall Width (mm): 95
Product Type: Meter
Recommended Environment: Indoor

$1,465.00

KIT, PUMP LOWER, PRO-CONNECT, CS, W/O BUNG ADAPTER

GG 273295

KIT, PUMP LOWER, PRO-CONNECT, CS, W/O BUNG ADAPTER

Graco 273295 Pump Lower, Kit, (Carbon Steel)

Transfer Pumps are required to move A and B materials to the Reactor® Spray Systems. The T4 Transfer Pump combines Graco’s proven Merkur® air-motor and carbon steel lower. The T4 is a 3:1 ratio pump with ProConnect technology – allowing you to quickly connect and disconnect the air motor from the pump lower.

Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.
Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.
Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.

Model: Pump Lower

Material: Carbon Steel
Package Options: Bare

$1,155.00

RAC 5 TIP, SPRAY

GG 286311

RAC 5 TIP, SPRAY

RAC 5 SwitchTip, 311 The Reverse-A-Clean (RAC) 311 RAC 5 SwitchTip is designed for narrow surfaces and thin materials. The 311 SwitchTip has a 0.011 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)

Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286327

RAC 5 TIP, SPRAY

RAC 5 SwitchTip, 327 The Reverse-A-Clean (RAC) 327 RAC 5 SwitchTip is designed for narrow surfaces and thicker materials. The 327 SwitchTip has a 0.027 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)

Used for residential and commercial applications

Includes OneSeal for most common coatings

Large selection of tip sizes available

Easy to identify laser stamped tip size

Solvent seal available when using extremely hot solvents

$62.75

RAC 5 TIP, SPRAY

GG 286411

RAC 5 TIP, SPRAY

Graco 286411 RAC 5 SwitchTip, 411

The Reverse-A-Clean (RAC) 411 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip

Compatible Material: Clear Coating, Lacquer, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.12
Maximum Flow Rate (L/min): 0.45
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.011

$62.75

RAC 5 TIP, SPRAY

GG 286423

RAC 5 TIP, SPRAY

Graco 286423 RAC 5 SwitchTip, 423

The Reverse-A-Clean (RAC) 423 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 25.4
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254
Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203
Orifice Diameter (in): 0.023
Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$62.75

RAC 5 TIP, SPRAY

GG 286513

RAC 5 TIP, SPRAY

Graco 286513 RAC 5 SwitchTip, 513

The Reverse-A-Clean (RAC) 513 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents

Model: RAC 5
Series: SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 30.5
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305
Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254
Orifice Diameter (in): 0.013

$62.75

RAC 5 TIP, SPRAY

GG 286625

RAC 5 TIP, SPRAY

Graco 286625 RAC 5 SwitchTip, 625

The Reverse-A-Clean (RAC) 625 RAC 5 SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain
For Use With: RAC 5 HandTite Tip Guard
Maximum Fan Width (cm): 35.6
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356
Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54
Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050
Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305
Orifice Diameter (in): 0.025

$62.75

EXTENSION, TIP, 15"

GG 287020

EXTENSION, TIP, 15"

Graco 287020 RAC X Tip Extension, 15 in

The 15 inch RAC X Tip Extension is ideal for hard-to-reach areas such as soffits, stairways, and vaulted ceilings. Includes RAC X HandTite Guard. Can be combined for extended reach up to 6 feet.

Includes RAC X HandTite Guard standard with 7/8 inch gun nut and OneSeal
Can be combined for extended reach up to 6 ft

Model: RAC X
Series: Tip Extension

Compatible Spray Tip: RAC X
For Use With: RAC X SwitchTips
Includes: RAC X HandTite Guard Standard, 7/8 in Gun Nut, OneSeal
Maximum Working Pressure (bar): 279
Maximum Working Pressure (kPa): 27900
Maximum Working Pressure (MPa): 27.9
Maximum Working Pressure (psi): 4050
Overall Length (cm): 38.1
Overall Length (in): 15

$54.75

KIT, FLTR, PUMP, 40MESH, MAGNUM

GG 288747

KIT, FLTR, PUMP, 40MESH, MAGNUM

Graco 288747 InstaClean Filter

Removes unwanted debris from the paint and reduces tip plugging to improve finish.

Application: Removes unwanted debris from the paint and reduces tip plugging to improve finish.

Graco insta clean 40 mesh manifold filter provides extra filtration ensuring a better finish
Form fitted one-way design prevents filter from being inserted incorrectly
Filter automatically flushes clean when valve pressure is relieved

Model: InstaClean
Series: Filter

For Use With: ProX17 Stand, ProX17 Cart, ProX19 Stand, ProX19 Cart, ProX21 Stand, ProX21 Cart, Magnum A60 ProPlus, Magnum A80 ProPlus, Magnum ProS19 ProPlus, Magnum ProS21 ProPlus
Overall Depth (cm): 0.9525
Overall Depth (in): 0.375
Overall Depth (mm): 9.525
Overall Height (cm): 4.7625
Overall Height (in): 1.875
Overall Height (mm): 47.625
Overall Width (cm): 0.9525
Overall Width (in): 0.375
Overall Width (mm): 9.525

$12.10

FITTING, ELBOW-MALE 3/16T X 1/8 NPT

GG 556638

FITTING, ELBOW-MALE 3/16T X 1/8 NPT

Fitting - Brass Male Tube Elbows 3/16 in. (4.8 mm) Tube x 1/8 in. (3.2 mm) NPTF For use with all Grease Jockey Systems. Brass Male Tube Elbow 3/16 inch (4.8 mm) tube x 1/8 inch (3.2 mm) NPTF Lubriquip part number 435-440-030

$4.10

SWITCH, PRESS ADJ, 1000-4700 PSI

GG 557829

SWITCH, PRESS ADJ, 1000-4700 PSI

Moisture-Resistant Single Control Pressure Switch, 4700 psi (324 bar)

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment. Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly LED lights visually display pressure switch functions Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers; 124595 4-pin M12 micro-connector sold separately Moisture resistant and factory set to ensure accuracy for long life and reliability Sends an alarm signal to alert either a high or low pressure condition Available for hydraulic pressures from 400 to 4700 psi (28 to 324 bar) 1/4 in NPT thread allows quick connection to injector systems Lubriquip part number 542-210-120

$617.00