Parts
GRITS 6IN SANDING AST
IR 9519
6" PSA Sandpaper, Assorted Grit 10 PK for Ingersoll Rand Edge Series Sanders
Ingersoll Rand's 6" sandpaper assortment features a variety of grits for your use with your 300G and 311G Ingersoll Rand Edge Series Sanders. Keep these on hand so you can complete whatever projects the day brings. This 10 piece pack includes 80, 810, 220, and 320 Grit.Includes: 10 pack includes 80, 810, 220, and 320 Grit
Pad Diameter or Size (in): 6
Product Height (in): 0.5
Product Weight (lb): 0.3
For Use With
- 300G
- 311G
BEAM CLAMP - 1 TON -BCT SERIES
IR BCT-1
Beam Clamp, 1 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
BEAM CLAMP - 10 TON - BCT SERIES
IR BCT-10
Beam Clamp, 10 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
BEAM CLAMP - 3 TON -BCT SERIES
IR BCT-3
Beam Clamp, 3 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
BEAM CLAMP - 5 TON - BCT SERIES
IR BCT-5
Beam Clamp, 5 Ton Capacity
The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
Product Application/Uses:
Features and Benefits:
- Quick installation by hand
- Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
- Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
- Each unit is serialized, supplied with a test certificate and manual.
- Ideal rigging devices for lifting, pulling or suspending loads.
- Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
- Low-headroom design adjusts to fit a wide range of flat or tapered beams
- The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.
1/2" DRIVE, 3" EXTENSION
IR E43H
1/2" Drive Hex Impact Socket, 3" Extension
Drive Size (in): 1/2Socket Bit Type: Hex
Socket Measurement Type: SAE
Warranty: Lifetime Limited
1/2" X 4 ANVIL ACCESSORY
IR EA44H
DXS2 1/2" Drive 4" Extended Anvil Attachment
The DXS® system features torque that works smarter, not harder. Tight-fitting DXS® attachments deliver up to 15% more motor torque to fasteners making the tools more effective – so you never lose power. Save space in your toolkit with the right tool for every time and place. Fast-swapping DXS® accessories let you configure the tool for the job at hand. Increase your time in service and save replacement costs by simply switching out worn or broken drives to get the tool working like new.Features And Benefits
- Compatible with all DXS2 tools.
- Versatility meets power in the Ingersoll Rand patented Drive Xchange System™ which lets you switch out anvils without clunky adapters that drain your tool's power.
- Maintain the torque power output by replacing your worn anvil in less than a minute.
- More impact power transfer compared to common socket adapters.
Includes: (1) DXS2 1/2" Drive 4" Extended Anvil
Product Application and Uses: For use with all Ingersoll Rand DXS2 Drive Impacts.
Anvil Length: 4" Extended
Drive Size (in): 1/2
Drive Type: Square
Product Length (in): 5.958661417322835
Product Width (in): 0.8267716535433072
Product Height (in): 0.8267716535433072
Product Weight (lb): 0.771618
Retainer Type: Friction Ring
Warranty: 1-year
For Use With
- 2236QPTIMAX
- 2236QTIMAX
- 2236QTIMAX-2
- 2236QTIMAX-G
- 2236QTIMAX-O
- 2236QTIMAX-R
- W7153
- W7153-AP
- W7153-K22
- W7153-K22-CN
- W7153-K22-IN
- W7153-K22-JP
- W7153-K22-KR
- W7153-K22-SGHK
- W7153-K22B-AN
- W7153-K22B-EU
- W7253-TL
Similar IR
- A31H
- A41H
- A61H
- AP41H
- EA42H
- EA46H
- EA48H
- EA410H
- EA66H
- AK32H
- AK33H
- AK42H
- AK43H
- AK62H
- EAK62H
COLLET
IR EP50-514
Stylus Grinding Collet for Ingersoll Rand EP50 Air Engraving Pen
Steel collet with carbide tip; 41mm Length, .24" DiameterIncludes: Steel collet with carbide tip; 41mm Length, .24" Diameter
Product Length (in): 1.6
For Use With
- EP50K
- EP50
CABLE EXTENSION ASSEMBLY
IR GEA40-EXT-20M
INSIGHTqc 20M DC Tool Extension Cable
Color: Grey
CABLE EXTENSION ASSEMBLY
IR GEA40-EXT-40M
INSIGHTqc 40M DC Tool Extension Cable
Color: Grey
QUICK CHANGE RETAINER FITS THD, QTY 1
IR HHW1-3450
QUICK CHANGE RETAINER FITS THD, QTY 1
ADAPTER (49440-36)
IR LA1-A710
Adapter for Ingersoll Rand for G1, G2 Series Grinder
CHUCK KEY
IR LA411-253
Chuck Key for Ingersoll Rand 327 Tire Buffer, 7807R Angle Drill
30 PC CARBIDE BUR MEGA SET
IR M30TIN
Carbide Grinding Burr Mega Kit, 30-Piece, 1/8" & 1/4" Shank, Various Head Diameters and Shapes with Hard Case
Ingersoll Rand carbide burrs are titanium nitride (TiN) coated to provide maximum edge retention and corrosion resistance. The TiN coating can improve the average lifetime of the burr by more than three times. Note: Burrs have a maximum operating speed of 40,000 rpm.Features And Benefits
- 30-Piece burr set for wide range of applications
- Durable storage box to keep the burrs organized
- One of each of our Titanium nitrate coated carbide burrs with 1/4" and 1/8" Shanks
- Various head sizes and shapes; cylindrical, pointed tree, ball-nosed tree, ball-nosed cylindrical, ball-nosed cone, and ball.
Includes: 30-piece 1/8' & 1/4' shank titanium nitride coated carbide burrs. Six different shapes: cylindrical, pointed tree, ball-nosed tree, ball-nosed cylindrical, ball-nosed cone, and ball.
Product Application and Uses: This 30-piece, carbide burr mega-set covers a wide range of applications.
Shank SIze (in): 1/8
Shank SIze (in): 1/4
