Parts

IR 43017

IR 43046

IR 43130

IR 441SR-85

IR 45165

IR 45179

IR 52080736

IR 529-274A

Collet Assembly for Ingersoll Rand 529 Reciprocating Saw

IR 6011

Fitting Replacement Part for Ingersoll Rand Tools

IR 7030JA1F12144

IR 7667-2

IR 7802S-6027

Spacer Bushing for Ingersoll Rand 7802 Series Air Drill, 2-Pack

IR 7804XPA-105

IR 89939722

IR 8SL-11

IR 910-98

IR 9519

6" PSA Sandpaper, Assorted Grit 10 PK for Ingersoll Rand Edge Series Sanders

• 300G
• 311G

IR AF120-322

IR BCT-1

Beam Clamp, 1 Ton Capacity

The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

Product Application/Uses:

Features and Benefits:

• Quick installation by hand
• Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
• Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
• Each unit is serialized, supplied with a test certificate and manual.
• Ideal rigging devices for lifting, pulling or suspending loads.
• Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
• Low-headroom design adjusts to fit a wide range of flat or tapered beams
• The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

IR BCT-10

Beam Clamp, 10 Ton Capacity

The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

Product Application/Uses:

Features and Benefits:

• Quick installation by hand
• Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
• Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
• Each unit is serialized, supplied with a test certificate and manual.
• Ideal rigging devices for lifting, pulling or suspending loads.
• Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
• Low-headroom design adjusts to fit a wide range of flat or tapered beams
• The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

IR BCT-3

Beam Clamp, 3 Ton Capacity

The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

Product Application/Uses:

Features and Benefits:

• Quick installation by hand
• Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
• Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
• Each unit is serialized, supplied with a test certificate and manual.
• Ideal rigging devices for lifting, pulling or suspending loads.
• Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
• Low-headroom design adjusts to fit a wide range of flat or tapered beams
• The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

IR BCT-5

Beam Clamp, 5 Ton Capacity

The BCT Series 1-10 metric ton capacity beam clamps provide a temporary or permanent mount to a wide range of tapered or flat beams. They are the ideal rigging device for lifting, pulling or suspending loads. These units have been designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7. Quick and simple installation is achieved without tools. Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom. The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

Product Application/Uses:

Features and Benefits:

• Quick installation by hand
• Designed and verified to achieve a minimum design factor of 5:1 for vertical lifting with powered or manual hoists or winches, meeting ASME B30.16 and ASME B30.7.
• Metric rated for vertical lifting or in-line pulling at 2200 lbs (1000 kg) per ton.
• Each unit is serialized, supplied with a test certificate and manual.
• Ideal rigging devices for lifting, pulling or suspending loads.
• Units accommodate hook-mounted hoist or load blocks with minimal loss of headroom.
• Low-headroom design adjusts to fit a wide range of flat or tapered beams
• The clamp jaws are designed to reduce beam stress by applying the load inside of the flange edge.

IR DG20-69A

Wrench for Ingersoll Rand Pro Series Grinder

IR E36H

IR E43H

1/2" Drive Hex Impact Socket, 3" Extension