INGERSOLL-RAND IR TOOL S12880
Balancer
IR BSD-40
Super Duty Spring Balancer, 66-88 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Visible cable for inspection
- Cable Material: Stainless steel
- Capacity (lb): 66 - 88
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 45.9
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Warranty: 1-year
Balancer
IR BSDL-25
Super Duty Long Spring Balancer, 44-55 lb Capacity, 9.85' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Precision-guided cable-winding prevents jamming
- Manual locking device for instant clamping or release
- Worm screw capacity adjustment
- Alignable rotating upper hook
- Cable replacement without balancer disassembly
- Cable visible for inspection
- Cable Material: Stainless steel
- Capacity (lb): 44 - 55
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 9.85
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 43.9
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BSDL-35
Super Duty Long Spring Balancer, 55-77 lb Capacity, 9.85' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Precision-guided cable-winding prevents jamming
- Manual locking device for instant clamping or release
- Worm screw capacity adjustment
- Alignable rotating upper hook
- Cable replacement without balancer disassembly
- Cable visible for inspection
- Cable Material: Stainless steel
- Capacity (lb): 55 - 77
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 9.85
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 46.1
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BSD-50
Super Duty Spring Balancer, 88-110 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Visible cable for inspection
- Cable Material: Stainless steel
- Capacity (lb): 88 - 110
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 52.7
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Warranty: 1-year
20V Cordless Reciprocating Saw
IR C5101-K22
20V Cordless Reciprocating Saw 2 Battery Kit, 1-1/4" Stroke, 3000 SPM
Description: The Ingersoll Rand IQV20 Cordless Reciprocating Saw combines next-level power and speed to cut through steel 20% faster than leading competitor tools. A powerful brushless motor and premium gearing extends tool longevity without sacrificing cutting speed or stalling on the toughest of jobs. A lightweight build and Ingersoll Rand IQV20 batteries keep you and your tools running all day long. The next generation of sawing technology is here, and it's majorly powerful.
Features And Benefits:
- SPEED: Cuts through steel pipes 20% faster than the leading cordless competitor.
- WEIGHT: 5% lighter than the leading cordless competitor at only 6.3lbs.
- PERFORMANCE: Powerful brushless motor and premium gearing extends tool life without sacrificing cutting speed, allowing the operator to power through the toughest jobs without stalling.
- DURABILITY: Resistant against over a dozen common workshop chemicals, UL IPX6 certified water-resistant.
- EASE-OF-USE: Tool-free blade clamp lets you make quick and easy changes.
- SAFETY: A trigger lock provides anti-restart protection, and a hanging hook lets you stow your tool safely.
- ADJUSTABILITY: Adjustable shoe gives you better control while you work and extends blade longevity.
- VISIBILITY: LED light helps reduce shadows so you can see your work area clearly.
- Kit Includes: (2) BL2022 5.0Ah Batteries and a 20V Battery Charger.
Product Application and Uses:
Remote work that requires good control of the tool in tight spaces, Demolition by cutting of metals, plastics, and woods, Cutting 2" exhaust piping that 3-5" cut-off tools cannot reach (mostly under chassis and overhead applications, Cutting rusted bolts (inability to use an impact to loosen bolts and threads damaged), Cutting away damaged fenders, door framing, off a car body (quick/easy demolition) or Cutting thick frames, body panels, cross members (retrieving parts for recycling), Applications where spark free cutting is required.
- Includes: C5101 20V Reciprocating Saw, (2) BL2022 5.0Ah Batteries, 20V Battery Charger, Charger Cord, Manuals. Saw blades NOT included.
- Actuation/Throttle Type/Switch Location: Handle
- Actuation/Throttle Type/Switch Type: Inside Trigger
- Built-in Light: Yes
- Color: Grey
- Configuration/Handle Type: D-Handle
- Duty Rating: Maintenance Duty
- Handle Location: Rear
- Handle Material: Overmolded Grip
- Housing Material: Nylon
- Lock Mechanism: Toggle Switch
- Motor: Brushless Motor
- Number of Batteries Required: 1
- Number of Blades Included: 0
- Number of Power Settings: Continuous
- Power Source: Battery Powered
- Product Length (in): 16.9
- Product Width (in): 3.3
- Product Height (in): 6.4
- Product Weight (lb): 6.3
- Product Weight (lb) (with Battery): 7.9
- Sound Pressure/Power Db(A): 85.2 / 93.2
- Special Features: Cuts through a steel pipe 20% faster than the leading cordless competitor*, 5% lighter than the leading cordless competitor for improved operator comfort and control*, Twice the life of the leading cordless competitor for improved durability and lower risk of unexpected tool failures like clamp breakage backed with a 3 year warranty*
- Speed Setting: Variable Speed
- Standards/Certifications: CE, UKCA, UL IPX-6
- Stroke Length (in): 1.25
- Strokes (per min): 3000
- Vibration Level (m/s2): 12.1
- Vibration Uncertainy K* (m/s2):
1/2in IQV20 DRILL DRIVER
IR D3141
1/2" 20V Cordless Compact Drill Driver Bare Tool, 450 in-lb Torque, Keyless Chuck, Pistol Grip
Description: The Ingersoll Rand D3141 IQV20 Cordless Compact Drill Driver combines all the flexibility and dexterity of cordless tools with the power, durability, and strength that our professional-grade portfolio is known for. Weighing 3 lbs. with battery and 7" tip to tail length, it's designed to help you access the toughest spots, from wheel hubs to heavy machinery gaskets. Also available in the D3141-K22 kit which includes (2) BL2012 2.5Ah Batteries, and 20V Battery Charger.
Features And Benefits:
- Performance: A powerful brushless motor runs with up to 450 in-lbs of torque, ensuring the IQV20 Cordless Compact Drill Driver operates at the peak of power in any application.
- Versatility: Equipped with both drill and drive modes, to help get the job done right- no matter the application.
- Precision: Fine-tune fastening depth with an 18-position clutch that helps reduce cam-outs and keep you working efficiently.
- Ergonomics: Powerful things come in small packages. The IQV20 Cordless Compact Drill Driver is 7" tip to tail and weighs 3 lbs. with battery.
- Durability: Impact-resistant rubberized design helps prevent accidental damage and increases longevity. IPX6 rated protection against harmful effects of water ingress.
- Speed: Whether you're drilling through sheet metal, wood or anything in between, two speed settings help you with the right level of torque.
- Strength: A 1/2" all-metal keyless chuck with carbide teeth grips drill bits and lets you drill through tough materials with ease.
- Visibility: An LED light located at the bottom of the tool reduces shadows so you can see your work area clearly.
- Also available in the D3141-K22 kit which includes the D3141 Drill Driver, (2) BL2012 2.5Ah Batteries, and 20V Battery Charger.
Product Application and Uses:
Drilling, honing, reaming, hole sawing, drilling out spot welds and rivets, driving threaded fasteners in sheet metal, wood or anything in between.
- Includes: Bare tool only, batteries and charger sold separately or with other kits.
- Actuation/Throttle Type/Switch Type: Trigger
- Adjustable Clutch: Yes
- Built-in Light: Yes
- Chuck Capacity/Bit Capacity (in): 1/2
- Chuck Type: Keyless Chuck
- Clutch Settings: 18
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Handle Material: Overmolded Grip
- Housing Material: Impact and chemical-resistant composite housing
- Max Free Speed (rpm): 1800
- Max Torque (ft-lb): 37
- Max Torque (in-lb): 443
- Max Torque (nm): 50
- Motor: Brushless Motor
- Number of Batteries Required: 1
- Power Source: Battery Powered
- Product Length (in): 7.1
- Product Width (in): 3.1
- Product Height (in): 8.3
- Product Height (in) (with Battery): 9.1
- Product Weight (lb): 2.2
- Product Weight (lb) (with Battery): 3.1
- Recommended Forward Torque Range (ft-lb): 37
- Recommended Forward Torque Range (in-lb): 443
- Recommended Forward Torque Range (nm): 50
- Reversible: Reversible
- RPM Setting 1: 500
- Sound Pressure/Power Db(A): 73 / 81
- Special Features: Compact
- Speed Setting: Dual speed
- Standards/Certifications: ETL, CB, CE, IPX6
- Tool Type: Compact
- Vibration Level (m/s2): 4.0
- Vibration Uncertainy K* (m/s2): 1.5
- Voltage DC: 20
- Warranty: 3-ye
1/4in HEX IQV20 SCREWDRIVER
IR D3411
1/4" Hex 20V Cordless Compact Screwdriver, Quick Change Chuck, 450 in-lb Torque, Pistol Grip, Bare Tool
Description: The Ingersoll Rand D3411 IQV20 Cordless Compact Screwdriver combines all the flexibility and dexterity of cordless tools with the power, durability, and strength that our professional-grade portfolio is known for. Weighing under 2.7 lbs. with battery and 5" tip to tail length, it's designed to help you access the toughest spots.
Features And Benefits:
- Performance: A powerful brushless motor runs with up to 450 in-lbs of torque, ensuring the IQV20 Cordless Compact Screwdriver operates at the peak of power in any demanding application.
- Versatility: A 1/4" Hex quick change all-metal chuck grips bits and lets you drive fasteners and drill through tough materials with ease.
- Precision: Fine-tune fastening depth with an 18-position clutch that helps reduce cam-outs and keep you working efficiently.
- Ergonomics: Powerful things come in small packages. The IQV20 Cordless Compact Screwdriver weighs less than 2.7 lbs with 20V 2.5 Ah battery, so you can get the job done in tough-to-reach spaces with less fatigue.
- Durability: Impact-resistant rubberized design helps prevent accidental damage and increases longevity. IPX6 rated protection against harmful effects of water ingress.
- Speed: Whether you're drilling through sheet metal, wood or anything in between, two speed settings help you with the right level of torque.
- Strength: A 1/4" Hex Quick Change all-metal chuck grips drill and driver bits and lets you drill through tough materials with confidence
- Visibility: An LED light located at the bottom of the tool reduces shadows so you can see your work area clearly.
- Also available in the D3411-K22 kit which includes (2) BL2012 2.5Ah Batteries, and a 20V Battery Charger.
Product Application and Uses:
Drilling, honing, reaming, hole sawing, drilling out spot welds and rivets, driving threaded fasteners in sheet metal, wood or anything in between.
- Includes: Bare tool only, batteries and charger sold separately or with other kits.
- Actuation/Throttle Type/Switch Type: Trigger
- Adjustable Clutch: Yes
- Built-in Light: Yes
- Chuck Capacity/Bit Capacity (in): 1/4
- Clutch Settings: 18
- Clutch Type: Slip Clutch
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Drive Type: Hex
- Handle Material: Overmolded Grip
- Housing Material: Impact and chemical-resistant composite housing
- Max Free Speed (rpm): 1800
- Max Torque (ft-lb): 37
- Max Torque (in-lb): 443
- Max Torque (nm): 50
- Motor: Brushless Motor
- Number of Batteries Required: 1
- Power Source: Battery Powered
- Product Length (in): 5
- Product Width (in): 3.19
- Product Height (in): 8.27
- Product Height (in) (with Battery): 9.45
- Product Weight (lb): 1.76
- Product Weight (lb) (with Battery): 2.69
- Recommended Forward Torque Range (ft-lb): 37
- Recommended Forward Torque Range (in-lb): 443
- Recommended Forward Torque Range (nm): 50
- Retainer Type: Quick Change
- Reversible: Reversible
- RPM Setting 1: 500
- Sound Pressure/Power Db(A): 73 / 81
- Special Features: Compact
- Speed Setting: Dual speed
- Standards/Certifications: ETL, CB, CE, IPX6
- Tool Type: Compact
- Vibration Level (m/s2): 4
- Vibration Uncertainy K* (m/s2): 1.5
- Voltage DC: 20
1/2" Drive, 3" Extension
IR E43H
1/2" Drive Hex Impact Socket, 3" Extension
- Drive Size (in): 1/2
- Socket Bit Type: Hex
- Socket Measurement Type: SAE
- Warranty: Lifetime Limited
Air Engraving Pen Kit
IR EP51K
Air Engraving Pen Kit, Includes 3 Stylus and Case, 13000 BPM
Description: With a knurled zoom throttle for positive control and three assorted carbide tipped styluses, the EP51 will allow you to engrave even the smallest details across a wide range of materials. Designed for industrial applications, the steel housing withstands the harshest environments while dampening vibration for comfortable all day use.
Features And Benefits:
- Productivity: A knurled, variable zoom throttle acts as a regulator for greater control across a wide range of materials.
- Comfort: Steel housing dampens vibration and a flexible hose allows for easy movement.
- Durability: Housing made of steel for even the harshest environments while engraving the hardest materials.
- Versatility: includes 3 different carbide tipped styluses to engrave various materials from brittle ceramics to hard alloy.
Product Application and Uses:
Designed for industrial applications and ideal for marking welds, hardened tool steels, plastic, glass, and other materials.
- Includes: EP51 Engraving Pen, Fine Point Stylus, Medium Point Stylus, Coarse Point Stylus, Molded plastic carrying case, 6ft flexible hose.
- Actuation/Throttle Type/Switch Type: Slide/Zoom
- Air Consumption @ Load (cfm): 1.5
- Air Consumption @ Load (l/min): 42.48
- Air Inlet: 1/8" NPT
- Air Pressure (psi): 90
- Bit Material: Carbide
- Blows per Min: 13000
- Color: Grey
- Configuration/Handle Type: Straight
- Duty Rating: Industrial Duty
- Hose Length (ft): 6
- Housing Material: Steel
- Max Pressure (bar): 6.2
- Min Hose Size (in): 7/32
- Non Sparking: No
- Number of Power Settings: Continuous
- Power Source: Air Powered
- Product Length (in): 5.68
- Product Width (in): 0.62
- Product Height (in): 0.62
- Product Weight (lb): 0.31
- Sound Pressure/Power Db(A): 75/86
- Speed Setting: Variable Speed
- Standards/Certifications: CE, UKCA
- Vibration Level (m/s2): 4.6
- Vibration Uncertainy K* (m/s2): 1..07
- Warranty: 1-year
- Accessories: TP-EP51-515
- Accessories: TP-EP51-516
- Accessories: TP-EP51-517
- Lubrication: 10G
- Lubrication: 10P
- Lubrication: 10Z4
- Parts: TA-EP51-303
- Parts: TA-EP51-TK1
- Parts: TP-EP51-130
- Parts: TP-EP51-501
- Parts: TP-EP51-502
- Parts: TP-EP51-505
- Parts: TP-EP51-506
- Parts: TP-EP51-507
- Parts: TP-EP51-508
- Parts: TP-EP51-509
- Parts: TP-EP51-512
- Parts: TP-EP51-65
ACCESSORY KIT
IR G1000-KIT-PAD
Accessory Kit, includes 6-Pads for Ingersoll Rand G1000 Sander/Polisher
- Includes: 2" sander backing pad, 3" sander backing pad, 3" polisher hook & loop backing pad, 3" sander hook & loop T80 foam pad, 3" sander hook & loop T10 foam pad, 3" polisher hook & loop pad
G1 Angle Die Grinder, 1/4" Collet, Rear Exhaust
IR G1A200RG4
Angle Air Die Grinder, 20,000 RPM, 0.4 HP, 1/4" Collet, Rear Exhaust
Description: The G1 Series Die Grinders feature a vane motor and a lightweight, composite housing that can stand up to harsh temperature changes. Compatible with piped-away exhaust kits, this powerful tool allows you to switch between front, rear and dual exhaust options.
Features And Benefits:
- Durability: Features a vane motor and a lightweight, composite housing made to withstand repeated drops, harsh chemicals and tough work environments, this tool is ready to work whenever, wherever.
- Comfort: Whether you're repairing a car or building a house, these die grinders have a comfortable, ergonomic D-shaped grip that ensures you'll get more done with less fatigue.
- Ideal for light material removal, cleaning rough castings, deburring parts, cleaning up welds, and other finishing tasks.
- One-nut access for all motor servicing.
- Patent-pending soft-mount system reduces vibration for extended motor and switch life.
- Compatible with piped-away exhaust kits, this powerful tool allows you to switch between front, rear and dual exhaust options.
Product Application and Uses:
Cleaning Rough Castings, Cleaning Up Welds, Deburring Parts, Finishing Tasks, Ideal For Light Material Removal
- Includes: Tool, (2) Collet Wrenches, Manuals
- Actuation/Throttle Type/Switch Location: Top, Bottom (straight tool)
- Actuation/Throttle Type/Switch Type: Lever
- Air Consumption @ Load (cfm): 25
- Air Consumption @ Load (l/min): 708
- Air Inlet: 1/4" NPT
- Air Pressure (psi): 90
- Arbor/Collet: 1/4"
- Bearing Type: Ball Bearing
- Color: Black
- Configuration/Handle Type: Right Angle
- Duty Rating: Heavy Duty
- Exhaust Location: Rear
- Grinder Type: Die Grinder
- Handle Material: Composite
- Height Over Spindle (in): 3.1
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 20000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/8
- Power Source: Air Powered
- Product Length (in): 6
- Product Width (in): 12.5
- Product Height (in): 2.5
- Product Weight (lb): 1.1
- Rated Power (hp): 0.4
- Right Angle Length (in): 3
- Right Angle Length (mm): 76
- Side to Center Distance (in): 0.54
- Side to Center Distance (mm): 14
- Sound Pressure/Power Db(A): 83.6 / 94.6
- Speed Setting: Variable Speed
- Standards/Certifications: 2006/42/Ec, En Iso 28927-12, En Iso 15744
- Vibration Level (m/s2): 5.6
- Warranty: 1-year
- Wheel Type: Burr
- Accessories: DG110-700-G2
- Lubrication: 10G
- Lubrication: 10P
- Parts: AG1-TK1
- Parts: LG1-K284
G1 Sander, 1/4-20 Thread
IR G1A200RS4
Angle Air Sander, 20,000 RPM, 0.4 HP, 1/4" -20 Thread, Rear Exhaust
- Arbor/Collet: 1/4" -20 Thread
- Configuration/Handle Type: Right Angle
- Configuration/Handle Type: Auxiliary Handle
- Duty Rating: Industrial Duty
- Exhaust Location: Rear
- Max Free Speed (rpm): 20000
- Min Hose Size (in): 3/8
- Mounting Type: Arbor
- Product Length (in): 6
- Rated Power (hp): 0.4
- Sound Pressure/Power Db(A): 83.6 / 94.6
- Speed Setting: Variable Speed
- Vacuum: None
- Vibration Level (m/s2): 3
- Warranty: 1-year
G3 Die Grinder
IR G3H150RG4
Air Angle Die Grinder, 15,000 RPM, 1.35 HP, 1/4" Collet, Rear Exhaust
Description: The G3 Series die Grinders are backed by Ingersoll Rand's longstanding history of delivering strong, powerful tools that make your life easier.
Features And Benefits:
- Power: Powerful 1.35 15,000 RPM vane motor that won't let you down on job that call for maximum power.
- Comfort: With a lightweight composite housing and ergonomic body design, the tools of the G3 Series are easy to hold and easy to use, even on the longest jobs.
- Vibration dampening for ease-of-use.
Product Application and Uses:
Ideal for industrial-duty material removal with burrs, grinding wheels, and coated abrasives. Optimized for general industrial use, MRO, rail, heavy machinery, oil and gas, shipbuilding, construction, aerospace, and metal fabrication.
- Actuation/Throttle Type/Switch Type: Safety Lever
- Air Inlet: 3/8" NPT
- Air Pressure (psi): 90
- Arbor/Collet: 1/4"
- Color: Black
- Grinder Type: Die Grinder
- Max Free Speed (rpm): 15000
- Max Pressure (bar): 6.2
- Min Hose Size (in): 1/2
- Power Source: Air Powered
- Sound Pressure/Power Db(A): 84.1 / 95.1
- Vibration Level (m/s2): 3.7
- Vibration Uncertainy K* (m/s2): 2.6
- Warranty: 1-year
1" Flat Chisel - 9"
IR H3R-214F-9
1" Flat Chipping Hammer Chisel Steel, 9" L Hex Shank Round Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand W1A1, W2A1, W3A1, W4A1 chipping hammers.
- Includes: (10) Chipping Hammer Chisel Steels
- Chisel Edge Style: Flat
- Chisel Style: Flat
- Collar Type: Round
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 6.5
- Product Length (in): 9
- Product Width (in): 1
- Product Weight (lb): 1.25
- Shank Length (in): 2.5
- Shank SIze (in): 0.58
- Shank Type: Hex
- For Use With: W1A1
- For Use With: W2A1
- For Use With: W3A1
- For Use With: W4A1
Moil Point - 12in .68 Rd. Shk Rd Col, Qty 1
IR H3R-215M-12
12" Moil Point Chipping Hammer Steel, Round Shank Round Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand W1A2, W2A2, W3A2, W4A2 chipping hammers.
- Includes: (5) Moil Point Steels
- Chisel Style: Moil Point
- Collar Type: Round
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 9.5
- Product Length (in): 12
- Product Weight (lb): 1.75
- Shank Length (in): 2.5
- Shank SIze (in): 0.68
- Shank Type: Round
- For Use With: W1A2
- For Use With: W2A2
- For Use With: W3A2
- For Use With: W4A2
2" Flat Chisel - 9"
IR HH1-323-9
2" Scaling Chipping Hammer Chisel Steels, 9" L Round Shank Oval Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for general demolition. For use with Ingersoll Rand 2DA2SA, 3DA2SA, 4DA2SA, 1A2SA, 2A2SA, 3A2SA, 4A2SA chipping hammers
- Includes: (1) Chipping Hammer Chisel Steel
- Chisel Style: Scaling
- Collar Thickness (in): 0.813
- Collar Type: Oval
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 6.625
- Product Length (in): 9
- Product Width (in): 2
- Product Weight (lb): 1.25
- Shank Length (in): 2.375
- Shank SIze (in): 0.68
- Shank Type: Round
- For Use With: 1A2SA
- For Use With: 2A2SA
- For Use With: 2DA2SA
- For Use With: 3A2SA
- For Use With: 3DA2SA
- For Use With: 4A2SA
- For Use With: 4DA2SA
6 Ton Air Hoist, 20Ft Lift, 15ft Drop, 2 Motor Pendant, Powered Trolley
IR HL6000K-3HA20-C15
6Ton Air Hoist, 20Ft Lift, 15ft Drop, 2 Motor Pendant, Powered Trolley
Jackhammer 1 X 4 1/4
IR JH40C3
Jack Hammer, 1 x 4-1/4" Hex Shank, 2.63" Stroke
Description: The JH40 Series jackhammer sports a hole capacity of up to 18 feet deep and 2 inches across, and is tough enough to blast away hard rock. Great for blasting holes, industrial work, and excavation projects, the JH40 will see you through any project.
Features And Benefits:
- Wet or Dry Drilling: Take the JH40 to any environment you need to work in.
- Capacity: Hole capacity of up to 18 feet deep and 2 inches across.
- Powerful: With 2000 blows per minute, the JH40 Series jackhammer lives up to the strength and power our customers have come to expect from Ingersoll Rand tools.
- Applications: Great for blasting holes, industrial work, and excavation projects, the JH40 will see you through any project.
Product Application and Uses:
Blasting holes, industrial work, and excavation projects.
- Air Consumption @ Load (cfm): 115
- Air Consumption @ Load (l/min): 3257
- Air Inlet: 3/4" NPT
- Air Pressure (psi): 90
- Blows per Min: 2000
- Bore Diameter (in): 2.5
- Collar Type: Round
- Color: Beige
- Configuration/Handle Type: T-handle
- Exhaust Location: Side
- Max Hole Depth (ft): 18
- Max Hole Diameter (in): 2
- Max Pressure (bar): 6.2
- Min Hose Size (in): 3/4
- Power Source: Air Powered
- Product Length (in): 22.5
- Product Weight (lb): 61
- Shank SIze (in): 1 x 4-1/4
- Shank Type: Hex
- Stroke Length (in): 2.63
- Warranty: 1-year
- Accessories: 50283183
- Accessories: 50283696
- Accessories: 50354596
- Accessories: 50713049
- Accessories: 51248318
- Accessories: 51293017
Adapter (49440-36)
IR LA1-A710
Adapter for Ingersoll Rand for G1, G2 Series Grinder
Payment options
