INGERSOLL-RAND IR TOOL S12880

IR 329-336

IR 33235

IR 33387-1

IR 33440

IR 328B-840

IR 328B-11

IR 3372370

IR 341A2M

Pneumatic Backfill Tamper, 5.75" Round Malleable Butt, 4" Stroke, 1-5/8" Bore

• Durability: With a plated piston and front-end seal to protect your tool, this Backfill Tamper can be used in the toughest environments. The sand-wiper seal prevents dirt and grit from getting inside the tool.
• Reliability: Thanks to a built-in lubricator, these tools are built to run smoothly and last, while extending overall operating life. Comes with a 1-year warranty.
• Power: Thanks to its high-power output, you’ll be able to breeze through any job.
• Access: This tool is as lightweight as it is powerful making compact spaces easy to reach

• 130A1M
• 241A1M

IR 325A-350

Cutter for Ingersoll Rand 325 Series Air Nibbler

• 325B

IR 327-A

3/8" Air Tire Buffer, 23,000 RPM, 0.5HP

• Rear Exhaust: With a rear exhaust, you can direct debris away from your workspace, giving you unrestricted access to your job.
• Safety: Featuring a special lock-out lever technology, you never have to worry about accidental throttle operation.
• Comfort: Easily fitting in your hand, this lightweight tool weighs less than 2 lbs. and will work hard so you don't have to.

• 327

IR 341SR-17

IR 341SR-30

Seal for Ingersoll Rand 341, 441 Series Air Tamper

IR 341SR-31

Seal for Ingersoll Rand 341, 441 Series Air Tamper

IR 341SR-311

Silencer for Ingersoll Rand 341 Series, 441 Series Air Percussive Tamper

IR 341SR-312

Seal for Ingersoll Rand 341, 441 Series Air Tamper

• 341A2M

IR 3445MAX

Air Angle Grinder/Cut-off Tool, 4.5" Wheel, 12,000 RPM, 0.88 HP, 5/8"-11 Thread, Rear Exhaust

• Max Power: The 4-1/2" wheel 3445MAX grinder delivers maximum power, productivity, comfort, and reliability to tackle the toughest material removal jobs in metalworking, construction, and more.
• Work Faster, Safer: The .88 HP air motor with 12,000 RPM delivers the power you need and the internal governor maximizes speed under the load, increasing the rate of material removal.
• Built-in lubrication: Its built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.
• Lightweight Comfort: The enhanced grip design increases operator comfort for extended use, and its lightweight construction, weighing less than 3.5 lbs., delivers the best power-to-weight ratio in its class.
• Material Compatibility: Cut, grind, or polish a variety of materials, including metal and concrete, with confidence thanks to the superior comfort and power.

• 345MAX
• M2A120RP1045
• G3A120RP1045
• G5351

IR 3445MAX-M

Angle Air Grinder/Cut-off Tool, 4.5" Wheel, 12,000 RPM, 0.88 HP, M14 Arbor, Rear-Piped Away Exhaust

Includes:

Product Application/Uses:

Features and Benefits:

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication.
• 1-year warranty.

Configuration/Handle Type: Right Angle

Max Free Speed (rpm): 12000

IR 345MAX

Angle Air Grinder/Cut-off Tool, 5" Wheel, 12,000 RPM, 0.88 HP, 5/8"-11 Thread, Rear Exhaust

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With a .88 HP motor, 12,000 RPM and weighing less than 3.5 lbs., the 345MAX has an ideal power-to-weight ratio. The Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication. Cut, grind, or polish a variety of materials, including metal and concrete, with confidence thanks to the superior comfort and power.
• Built-in lubrication: Its built-in lubricating wick optimizes the life of the angle gear set by improving lubrication to the bevel and pinion gear set.

• 3445MAX
• G5351

IR 345MAX-M

Angle Air Grinder/Cut-off Tool, 5" Wheel, 12,000 RPM, 0.88 HP, M14 Arbor, Rear Exhaust

Includes:

Product Application/Uses:

Features and Benefits:

• Comfort: With a lightweight composite housing and ergonomic design, the Max Series Angle Grinders are easier to work with for long periods of time.
• Power: With an ideal power-to-weight ratio, the Max Series Angle Grinders are great for high-performance material removal.
• Versatile: The Max Series Angle Grinders are a versatile set of tools you can use in most major markets, from vehicle repair and body work to construction and metal fabrication.
• 1-year warranty.

Configuration/Handle Type: Right Angle

Max Free Speed (rpm): 12000

IR 34RB029

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 187 RPM, 4 HP, 507 NM, Reversible

IR 34SR-383

3" Steel Butt 7/8" Rod Tamper for Ingersoll Rand 341A2M Tamper

• 341A2M

IR 34RB045

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 121 RPM, 4 HP, 788 NM, Reversible

IR 34RB078

Spur Gear Air Motor, 1-1/2" Keyed Shaft, 69 RPM, 4 HP, 1370 NM, Reversible

IR 34SR-85

Screw Replacement Part for Ingersoll Rand 341, 441 Tamper

• 341A2M

IR 34U-103-4

IR 34U-58-10

Washer for Ingersoll Rand HLK Chain Hoist,, 10-Pack

IR 34U-367

IR 35-36

IR 35-42-7

IR 35-A53

IR 35-724

IR 35-A726

Anvil Assembly for Ingersoll Rand 35MAX and 36QMAX 1/2" Drive Impact Wrench

• 36QMAX

IR 35-D727

IR 35-K249

IR 360-313

Air Belt Sander, 3/8"x13", 20,000 RPM, 4700 SFPM, 0.6 HP, Rear Exhaust

• Strong and Reliable: .6HP motor delivers maximum removal rates to ensure you get the job done quickly and can do more jobs each day.
• Adaptable: Tool-free articulating arm ensures hard to reach areas are never overlooked and quick adjustments for whatever task is at hand.
• Adjustable: A handy power regulator ensures the right amount of power for every task.
• Ergonomic: Narrow rubber grip provides comfort to last as long as you need.
• Comfort: Built for all-day use, these lightweight sanders weigh less than 2.5 lbs. and tackle every job without sacrificing comfort and ergonomics.
• Uses: Can accomplish a wealth of sanding and finishing tasks, from removing spot welds, rust, burrs and surface deposits to final finishing and much more.
• Includes: 3/8x13" Belt Sander and (3) Norton sanding belts (60, 80 and 100 Grit)

• 360-418

IR 360-313-KIT-BELT

Belt Kit, 3/8x13 for Ingersoll Rand 360-313 Sander

• 360-313

• G1811-KIT-BELT

IR 360-418

Air Belt Sander, 1/2"x18", 20,000 RPM, 4700 SFPM, 0.6 HP, Rear Exhaust

• Strong and Reliable: .6HP motor delivers maximum removal rates to ensure you get the job done quickly and can do more jobs each day.
• Adaptable: Tool-free articulating arm ensures hard to reach areas are never overlooked and quick adjustments for whatever task is at hand.
• Adjustable: A handy power regulator ensures the right amount of power for every task.
• Ergonomic: Narrow rubber grip provides comfort to last as long as you need.
• Comfort: Built for all-day use, these lightweight sanders weigh less than 2.5 lbs. and tackle every job without sacrificing comfort and ergonomics.
• Uses: Can accomplish a wealth of sanding and finishing tasks, from removing spot welds, rust, burrs and surface deposits to final finishing and much more.
• Includes: 1/2"x18" Belt Sander and (3) Norton sanding belts (60, 80 and 100 Grit)

• 360-313

IR 360-418-KIT-BELT

Belt Kit for Ingersoll Rand 360-418 Sander

• 360-418

IR 371-A

1/4" Air Screwdriver, 10 ft-lb Torque, 2000 RPM, Positive Jaw Clutch, Trigger

• Performance: Positive action clutch for full torque throughout rundown.
• Ergonomics: Designed to fit perfectly in your hand, this tool allows you to work long stretches at a time. Offers convenient one-handed operation, with reverse control at trigger.
• Versatility: Variable speed throttle for easy starts.

• 371

IR 37598

IR 38559233

IR 38600714

IR 38752358

IR 38776332

IR 38966

IR 3934-53

IR 3934-A40

IR 3940-11

IR 3940-283

IR 3940-329

Reverse Valve Service Part for Ingersoll Rand Power Tools

IR 3940-36

IR 3940-658A

IR 3940A-302

Throttle Valve Plunger Service Part for Ingersoll Rand Power Tools

IR 3940B2TIEX

1" Air Impact Wrench, ATEX/Hazardous Duty, 2750 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger

• Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
• Power: High torque output of 2750 ft-lbs and 800 blows per minute. The reverse bias motor helps remove the most stubborn bolts and the twin hammer mechanism ensures consistent power and balance.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Reverse bias motor to help remove the most stubborn bolts.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler

• 3942B2TIEX

IR 3940P-A329

IR 3940P-283

IR 3940-TK1

Tune-up Kit for Ingersoll Rand 3940 Series Air Impact Wrench

• 3940B2TI
• 3940B2TIEX
• 3940P2TI

IR 3942B1TI

No. 5 Spline Air Impact Wrench, Super Duty, 3250 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger

• Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Reverse bias motor to help remove the most stubborn bolts.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler
• Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding

• 3940A1TI
• 3940B1TI
• 3955B1TI

IR 3942B2TIEX

1" Air Impact Wrench, ATEX/Hazardous Duty, 3250 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger

• Environmental, Health and Safety: ISO 80079-36 and ATEX 2014/34/EU, Ex h IIA T6 Gb X Certified to meet ATEX Zone 1 or Zone 2 requirements.
• Power: The 3900 Series delivers a high torque output of 3250 ft-lbs and 850 blows per minute.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Reverse bias motor to help remove the most stubborn bolts.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler

• 3940B2TIEX

IR 3955A2TI

1-1/2" Air Impact Wrench, Super Duty, 5000 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Outside Trigger

• Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Reverse bias motor to help remove the most stubborn bolts.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler
• Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
• Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding.

• 3956A2TI

• 3956A2TI

IR 3955-638

Socket Head Cap Screw Service Part for Ingersoll Rand Power Tools, Qty 4

IR 3955-283

IR 3955B2TI

IR 3955-A92

IR 3955B2TIEX

1-1/2" Air Impact Wrench, ATEX Rated, 5000 ft-lb Torque, Titanium Hammercase, D-Handle Inside Trigger

• Environmental, Heath and Safety: ISO 80079-36 Certified and ATEX Zone 1 or Zone 2 requirements.
• Power: The 3900 Series delivers a high torque output of 5000 ft-lbs and 700 blows per minute.
• Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this series is corrosion and wear resistant, which makes it great for outdoor conditions.
• Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
• Balance: Twin hammer mechanism ensure consistent power and balance.
• Reverse bias motor to help remove the most stubborn bolts.
• Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
• Integral muffler

• 3955B2TI

• 3956B2TIEX

IR 3955-36

Hammer Case Gasket Service Part for Ingersoll Rand Power Tools

IR 3955-53

IR 3955-D727

IR 3956B2TI

1-1/2" Air Impact Wrench, 5450 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger

• Performance: Best-in-class power-to-weight performance, delivering 5,450 ft-lbs (7,300 Nm) of breakaway torque.
• Ergonomic: Ergonomically enhanced 360° D-auxiliary handle.
• Reliability: Assembled in the USA and backed by our broad network of parts and service to ensure unsurpassed serviceability.
• Durability: Optimized titanium hammercase, along with bronze endplates and corrosion-resistant parts.

• 3955B2TI

• 3955B2TI

IR 39587

IR 39849

IR 3A2SA

Air Chipping Hammer, 3" Stroke, 1725 BPM, Round Shank Oval Collar

• Durability: The A Series chipping hammers are equipped with a rubber buffer retainer and threaded barrels to extend the life of your product.
• Reliability: The A Series hammers have lock spring retainers that make sure the steel stays in place.
• Access: With a swan neck handle and long nozzle, you’ll be able to work in tight, hard to reach spaces with ease.

• 2A1SA
• W2A2
• W2A1

IR 3DA-121

IR 3DA-51

IR 3DA-305

IR 3DA-549

IR 3DA-85

IR 3DA-A1

IR 3RL2-705

IR 3RL2-A552

IR 3RL-42-5

IR 3RL-511

IR 3RL-80

IR 3RLM-A37

IR TRP-A40-B

IR TRP-761

IR TRP-A40-P-B

IR TRP-273

IR TRP-40-B

IR TRP-303

IR TRP-A302

IR TRP-A93

IR UH-100-M

IR UF-50-M

IR TRP-311-1

IR TRP-40-1

IR UH-75-M

IR TRP-580

IR VDA-723

IR VPAD-6

6" Vacuum Ready Vinyl Pad for Ingersoll Rand Sander

• 4151
• 4151-2
• 4152
• R036C-C1
• R036C-C2
• R036C-C3
• R036C-S1
• R036C-S2
• R036C-S3