Hydraullic Units

EP L119110SR

• Type: Service Kit

• SubTypes: Spring Kit

EP L345045

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Saddle Kit

EP L661028

• Type: Service Kit

• SubTypes: Screw

EP L748900SR

• Type: ERP

• SubTypes: Saddle Kit

EP LGH310

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 10
• Capacity KN: 92

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGH314

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 14
• Capacity KN: 125

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: RWH121, FZ1065, LGH14K6

EP LGHMS310EB

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 10
• Capacity KN: 92

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH310, SGM0704, BHP112, BHP181, BHP180, PUD1300B, G2535L, HC7206C

EP LGHMS314EB

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 14
• Capacity KN: 125

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH314, RWH121, FZ1065, LGH14K6, BHP172, BHP282, BHP190, PUD1300B, G2535L, HC7206C

EP LGHMS324H

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 24
• Capacity KN: 215

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH324, RCH202, HP2015, LGH24K6, BHP272, BHP292, BHP280, P392, GA45GC, HC7206C

EP LGM203

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 3
• Capacity KN: 26,7

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM204

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 4
• Capacity KN: 35,6

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM207

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 7
• Capacity KN: 62,3

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LGM305

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 5
• Capacity KN: 44,5

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM306

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 6
• Capacity KN: 48,9

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0404

EP LGM308

• Type: Puller

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGM
• SubTypes: Lock-Grip Puller Mechanical

• Capacity Imperial Tons: 8
• Capacity KN: 71,2

• LGM-Series Pullers are an ideal solution for pulling small to medium-size wheels, sprockets, bearings and other similar shaft mounted parts. The puller's selfcentering closing system allows all jaws to move simultaneously, making it easy for a single operator to mount the puller and to perform the application. Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Quickly and easily mount on a wide range of applications
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGM-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: SGM0704

EP LH-102

EP LH-2506

EP LH50

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Direct Mounted Load Cell

• Accuracy, plus/minus2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a plus/minus2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Remote Mounted Load Cell

• Accuracy, plus/minus2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a plus/minus 2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006K

• Type: Service Kit

• SubTypes: Seal Kit

EP LPL-1002

EP LPL-1602

EP LW16

Choose the LW-Series Vertical Lifting Wedge when you need to lift and lower heavy loads of up to 16-tons with a stable motion without slippage. A minimum insertion gap of 0.39" (10 mm) is needed which expands up to 2.02" (51.5 mm). Retraction force is supplied by the single-acting spring return cylinder. The maximum operating pressure is (10000 psi 700 bar).

The included SB2 stepped safety block provides reassuring support, and can also be used to increase the lifting height to 2.72" (69 mm). The LWB1 is a larger stepped block available as an option.

A compatible hydraulic pump is needed to operate the LW16. The Enerpac P392 Hand Pump, or the P392FP Foot Pump are ideal.

Alternatively, choose the LWC16 Vertical Lifting Wedge, which includes an integrated hand pump.

• Type: Spreader
• Max Bar: 700
• Max PSI: 10000

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools
• Series: LW
• Stroke Inches: 0.83
• Stroke MM: 21
• SubTypes: Lifting Wedge

• Capacity Imperial Tons: 16
• Capacity KN: 157

EP LW-16

EP MK106

• The Simplex MK106 Maintenance Kit provides a complete assortment of attachments that greatly expands the range of applications. Using thesevarious attachments allows you to custom build spreaders, straightening tools, clamps and a wide variety of other problem solving maintenancetools.
• Set includes a Simplex hand pump, cylinder, hose, gauge and gauge adaptor.
• Heavy duty case included.
• Rated at 5 tons when attachments are used.
• Quick lock and threaded adaptors included.
• Order as a set or individual components.
• R106 is rated at 10 tons at 10,000 psi. When using attachments or extensions do not exceed 5,000 psi (5 tons) reading on the gauge. Accessories & extensions are only rated at 5 tons. S2000A Spreader has an operating capacity of 1 ton.
• Add collar toe and flat base to build custom spreader or toe jack.
• Extensions, custom heads and adapters allow you to create tools that solve hundreds of problems. Simplex MK106 kits are used extensively for collision repair.
• Add a V-base and flat base for special spreading, holding and bending jobs.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: MK
• Stroke Inches: 6
• Stroke MM: 152.4
• SubTypes: Steel General Purpose Cylinder and Steel Hand Pump Set with 17 Cylinder Attachments

• Capacity Imperial Tons: 10
• Capacity KN: 89,0

• Set Includes: R106, P42, HCA6, G5, GA1-Simplex, S2000A, MK4, MK5, MK6, MK7, MK8, MK9, MK10, MK11, MK12, MK13, MK14, MK15, MK16, MK17, MK18, MK19, MK20, MK21