Hydraullic Units

EP WMC-580

EP WPFL300V

• Type: Hydraulic Cylinders
• Max PSI: 5000
• Min PSI: 1400

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: WPF
• Stroke Inches: 1.65
• SubTypes: Collet Lok Swing Cylinder

• Double acting Collet-Lok® action allows fully automated operation
• Additional level of safety since live hydraulics are not required to maintain clamping force
• Collet-Lok® swing cylinders can be mounted by the flange or threaded into the fixture. Flanged models have manifold ports and tubing ports.
• Viton seals are standard

• Accessories: CA3070

EP WPFR300V

• Type: Hydraulic Cylinders
• Max PSI: 5000
• Min PSI: 1400

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: WPF
• Stroke Inches: 1.65
• SubTypes: Collet Lok Swing Cylinder

• Double acting Collet-Lok® action allows fully automated operation
• Additional level of safety since live hydraulics are not required to maintain clamping force
• Collet-Lok® swing cylinders can be mounted by the flange or threaded into the fixture. Flanged models have manifold ports and tubing ports.
• Viton seals are standard

• Accessories: CA3070

EP WR15K

• Type: Service Kit

• SubTypes: Repair Part

EP WRP-20

EP WTE-20

EP WUD1300B

• Type: Hydraulic Pump
• Max Bar: 350
• Max PSI: 5000

• Product Group: Pumps
• Product Line: Work Holding Tools
• Series: WU
• SubTypes: Electric Pump - Economy

• The Economy pump is best suited to power small to medium size fixtures. Its lightweight and compact design makes it ideal for applications which require easy transport of the pump. The universal motor works well on long extension cords.
• Provides advance/auto-retract of singleacting cylinders
• 10-foot pendant controls motor and valve operation
• Use with AP500
• Lightweight and compact design
• Large easy-carry handle for maximum portability
• Two-speed operation reduces cycle times for improved productivity
• 24 VDC remote motor control, 10-ft length for operator safety
• Starts under full load
• High strength molded shroud with integral handle, protects motor from contamination and damage
• Designed for intermittent duty cycle

EP XA12VG

Enerpac XA Series Air Driven Hydraulic Foot Pumps are ideal choice for hands-free operation.

All models offer two control pedals for adding and releasing pressure to the tool. A pedal lock function can be used in the retract position. The XA foot pump provides fine metering controls to apply the mandatory stroke and force.

This air hydraulic foot pump provides a closed hydraulic system that prevents contamination and allows pump usage in any position.

The XA series foot pump has many optional features that can be ordered separately including:

• ½ Gallon Oil Reservoir
• Joy-stick Lever Kit
• Hydraulic Swivel Connector

The maximum operating pressure for this pump is 10,000 psi (700 bar). Maximum flow rates at rated pressure 15 in3/min (1.97L).

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: XA
• SubTypes: Air Pump

• Higher oil flow for increased productivity
• Variable oil flow and fine metering for precise control
• Closed hydraulic system prevents contamination and allows pump usage in any position
• Pedal lock function for retract position
• External adjustable pressure setting valve
• ATEX Certified.* Includes ground screw for explosion protection

• Accessories: XPG1, XLK1, XSC1, RFL102

EP XA1UE2LK

• Type: Service Kit

• SubTypes: Repair Part

EP XC115VC

EP XC1TRK

• Type: Service Kit

• Series: XC
• SubTypes: Repair Part

EP XC2402MB

The XC2-Series pumps take speed, battery run time and oil capacity to new levels greatly expanding the usage opportunities. Capable of larger tool and cylinder applications, cordless convenience can be extended further in the field or facility.

The high-performance brushless motor provides the speed of a 1/2 HP electric pump enabling corded productivity with cordless convenience.

Manual valve models feature a variable speed trigger for greater control of tool or cylinder advance and the Enerpac 54 Volt battery system enables significant work completion on a single battery charge.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: XC2
• SubTypes: Cordless Pump - Battery

Portable Performance Where it Matters

Weighing as little as 26 lbs (12 kg), you can take the new XC2 Cordless Battery Pump almost anywhere. Whether you're 'off the grid' or inside a facility, this game changing pump combines the power of a traditional electric 1/2" horsepower (0.37 kW) pump with the freedom to lift, pull, split, torque, or cut - even in the most demanding applications. Complete with an optional shoulder strap and environmentally protected IP67 control pendant, the XC2 allows you to get to the job site easily - and get your work done fast.

High Capacity and Extended Battery Runtime for Higher Cycle Jobs

Before the XC-Series, cordless battery pumps simply didn't have the speed, capacity, or accuracy to tackle larger jobs, forcing people to turn to exhausting manual pumps to get the job done. The XC2 features the Enerpac High-capacity 54 Volt battery that keeps you working for longer and delivers flow rates comparable to a 1/2 horsepower electric pump - running 2.5 x longer and 30% faster than the XC1.

The XC2's control gives you the accuracy to ensure your project is completed to your exacting standards, with an even more precise variable speed trigger available on manual valve models.

Tackle Larger Projects with Ease

In addition to a longer runtime, faster speed, and more precise control, the new 1-gallon (4-litre) capacity model creates a new world of possibilities, setting you free to take on larger and higher cycle jobs. The clever bladder design means the pump can be used in almost any position, even upside down.

• Cordless convenience eliminates extension cords, noise and emission producing generators
• High-performance brushless motor drives high-flow rates for increased productivity and provides twice the life of brushed motors
• Bladder reservoir reduces contamination and allows pump use in any position
• Pump models with 1 gallon oil capacity enable use with larger and multiple cylinders
• Accessory shoulder strap SSTRP55 attaches to integrated steel rings for enhanced portability
• Compatible with the Enerpac Connect App, which gives access to the latest tool & job information
• Torque pump models available

• Set Includes: EBH544K, EC1F541B, SSTRP55
• Accessories: CC131, CC132, CC010, EC1F541B, EC1F542E, EC1F542A, EBH544K, SSTRP55, ECC541B, ECC541N, ECC542A, ECC542E, ECC542U

EP XC28V

EP XLK1

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Joy Stick Lever Kit

EP Y200010

• Type: Service Kit

• SubTypes: Valve Spindle

EP Y402070

• Type: Service Kit

• SubTypes: Handle

EP ZA4408MX

These 2 stage pumps are based on our Z-Class hydraulic pump platform - widely recognized as the market leader in industrial hydraulic pump technology. ZA Series air driven pumps are built to power medium to large-sized double-acting cylinders and other hydraulic tools.

Choose a ZA Series air over hydraulic pump for high power intermittent use at locations where electricity is not allowed or readily available.

A selection of valve and control options allow you to configure a pump for a wide range of demanding applications. Various reservoir capacities are available, ranging from 1.2 to 10.3 gallons. All include either a sight gauge or level gauge for easy oil level monitoring.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZA
• SubTypes: Air Pump - High Flow

• Features Z-Class high efficiency pump design, higher oil for high flow and bypass pressure.
• Two-speed operation and high by-pass pressure reduces cycle time for improved productivity.
• Intermittent duty power allows users to run the motor between 20-60 minutes at a time, depending on reservoir capacity and sound levels.
• Internal relief valves. One is factory set for overload protection while the second is user adjustable for pre-setting maximum system pressure.
• Sight gauge on 1.2 and 1.8-gallon and level gauge on 2.6, 5.2 and 10.3-gallon reservoirs allow quick and easy oil level monitoring.
• Optional heat exchanger warms exhaust air to prevent freezing and cools the oil.
• ATEX Certified

EP ZC3308JB

The Enerpac ZC-Series pump combines the performance of an electric pump with the convenience and portability of a battery pump. This quiet, cordless solution is ideal for applications where emission and noise are a concern, or when electricity or air is not readily available.

Power for the pump is supplied by a rechargeable 82V lithium-ion battery. The lithium-ion battery can provide impressive run times, even under extreme job site conditions. The ZC-Series Cordless Battery Pump has an oil capacity of 1.75 gallons and a flow rate of 32 in3/min.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZC
• SubTypes: Cordless Pump - Battery

• High-flow cordless solution saves users time and money by eliminating the need for using a generator or electrical sources
• Brushless 1.36 hp motor and 3-stage pump maximizes pump and tool productivity while minimizing heat build-up and downtime
• Oil Capacity: 1.75 gallons; Flow rate-32 in3/min
• The Lithium-Ion battery provides superior run time - even under extreme job site conditions, running approximately 50 cycles on a RC1006 and approximately 90 cycles on a RC504 cylinder on a single charge
• Convenient 10 ft. pendant cord for hassle-free operation
• Reduce noise level, 80 dba maximum
• Zero emission hydraulic power pack

• Accessories: ZC115VC

EP ZC82V4NA

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Battery

EP ZE2108DB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE2208MB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE2308MB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE2308PB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE2408PB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE3320MB

Enerpac ZE3 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE3 pump utilizes the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE3 is suited to continuous use in manufacturing and workshop environments.

The 1.0 hp (0.75 kW) induction motor in the ZE3 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption than pumps with standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 1.0 hp (0.75 kW) induction motor for long life and quiet operation.
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 75 dBA sound level.
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

• Accessories: ZPF, SBZ4, ZRC20, ZPSE3