Hydraullic Units

EP HCL-504

EP HCR2006

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.

Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCR
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Cylinder

• Double-acting for fast and controlled advance and retract
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes
• Collar threads included on models up to 250 ton. Optional on 300 ton and higher.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Spare Part(s): HCR200K1
• Accessories: CATS200

EP HCR-2008

EP HCR-3006

EP HCRL1006

HCRL Series High Tonnage Hydraulic Cylinders feature a lock nut to provide mechanical load holding for extended periods of time. These double-acting cylinders use hydraulic force to deliver a faster and more controlled return of the plunger than load/gravity return equivalents. Tilt saddles are provided as standard on all HCRL cylinders which allow up to 5 degrees of load misalignment.

All Enerpac High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and a robust nitrocarburized finish on both the body and plunger.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10150

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HCRL
• Stroke Inches: 5.91
• Stroke MM: 150
• SubTypes: High Tonnage Lock Nut Cylinder

• Ensures safety by providing mechanical load holding for extended periods
• Low friction lock nut spins easily, saving time and effort
• Double acting hydraulic return for fast advance and retract
• Integrated tilt saddle allows up to 5 degrees of misalignment
• Nitrocarburized surface resists side-loading and cyclic wear
• 10% side-load resistance over full cylinder stroke
• Stop-ring prevents plunger blow-out
• Weather protected, inside and out
• Upper and lower replaceable bearings support the plunger throughout the stroke
• Certified lifting eyes
• Base mounting holes and collar thread included as standard.
• HCRL-Series Cylinders are available with up to 1000-ton capacity and 24-inch stroke upon request.
• Maximum working pressure up to 10,000 psi (700 bar)
• Complies to ASME B30.1

• Accessories: CHM6

EP HP2006

• Type: Puller Accessory

• Product Group: Pullers

EP HP2031

• Type: Puller Accessory

• Product Group: Pullers

EP HP3015

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: HP
• SubTypes: Threaded Hollow Saddle

EP HPT1500

The HPT1500 is a manually operated high-pressure hydraulic tensioner pump in a convenient portable format. With no need for trailing power cords or air hoses, the HPT1500 is ideal for bolt tensioning applications where there is no power source available.

This high-pressure hand pump creates a maximum working pressure of 21,750 psi (1500 bar), and the robust, but lightweight construction provides greater portability than powered tensioner pumps.

To minimize cycle times, the two-speed operation displaces a large volume of oil per stroke at the first stage, and the included pressure gauge keeps you fully informed throughout the process.

Important: These pumps operate at ultra high-pressure, use only the specified fittings and hoses designed for these pressures.

• Type: Hydraulic Pump
• Max Bar: 1500
• Max PSI: 21750

• Product Group: Bolt Tensioner Pumps, Bolt Tensioners
• Product Line: Industrial Tools, Bolting Tools
• Series: HPT
• SubTypes: Hand Pump - Tensioning Pump

• The Enerpac HPT high-pressure Hand Pump is ideally suited for use with hydraulic bolt tensioning tools and hydraulic nuts
• Lightweight and portable high-pressure hand pump
• Two-speed operation displaces a larger volume of oil per stroke, reducing cycle times for many testing applications
• Includes a gauge and coupler for direct connection to GT-Series bolting tools
• Integrated relief valve set at 21,750 psi
• These products operate at ultra-high pressure, use only the specified fittings and hoses designed for these pressures

EP IC-50

EP IC-51

EP IPA5073

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 50
• Capacity KN: 498

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RR5013, ZA4408MX, GF50P, HC9306, GA2
• Accessories: PK1002, A150, IPL100

EP IPE1215

• Type: Hydraulic Press
• Max Bar: 700
• Max PSI: 10000

• Product Group: Presses
• Product Line: Industrial Tools
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 10
• Capacity KN: 101

• Quality welded frame for maximum strength and long life
• Exclusive Hydra-Lift bed for effortless adjustment of the vertical daylight (10-ton models are manual)
• Roller head design is standard to allow movement and locking of the cylinder from side to side(10-ton, 25-ton, and 30-ton are manual)
• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

• Set Includes: RC1010, ZE2208MB, GF10P, HC9306, GA2
• Accessories: IPK1012, A136

EP IPH100D13-2

• Type: Hydraulic Press
• Max PSI: 10000

• Product Group: Presses
• Series: IP
• SubTypes: H-Frame Press

• Capacity Imperial Tons: 100

• Set Includes: RR10013, GA3, GF871P, HC9306

EP JBI25

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: JBI
• SubTypes: Base Plate

EP L119110SR

• Type: Service Kit

• SubTypes: Spring Kit

EP L748900SR

• Type: ERP

• SubTypes: Saddle Kit

EP LGH314

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGH
• SubTypes: Lock-Grip Puller Hydraulic

• Capacity Imperial Tons: 14
• Capacity KN: 125

• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Turning the puller handle locks the jaws onto the application, allowing the desired object to be pulled free when the spindle is turned.
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: RWH121, FZ1065, LGH14K6

EP LGHMS324H

• Type: Puller
• Max PSI: 10150

• Product Group: Pullers
• Product Line: Industrial Tools
• Series: LGHMS
• SubTypes: Lock-Grip Master Puller Sets

• Capacity Imperial Tons: 24
• Capacity KN: 215

• All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump
• LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.
• Quickly and easily mount on a wide range of applications
• Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue
• Lock-on jaws offer a secure grip for safe and easy operation
• Synchronous jaw movement enables entire pulling job to be performed by a single operator
• LGH-Series Pullers MUST be used with a point protector if the shaft end does not contain a drilled center hole. One point protector is included with every puller.
• Enerpac cylinders and pumps can be operated to 10,150 psi, but should not be operated past 5,000 psi when using the Cross Bearing Puller Set tools.
• Always wear safety goggles and gloves while using pullers.

• Set Includes: LGH324, RCH202, HP2015, LGH24K6, BHP272, BHP292, BHP280, P392, GA45GC, HC7206C

EP LH-2506

EP LH50

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Direct Mounted Load Cell

• Accuracy, ± 2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a ± 2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006

• Type: Tension Meter and Load Cell

• Product Group: Presses
• Product Line: Industrial Tools
• Series: LH
• SubTypes: Remote Mounted Load Cell

• Accuracy, ± 2% of full scale
• Zinc and bronze plated to resist rust and corrosion
• Dual-range readout in kilograms and pounds
• Cushioned metal case provides safe storage and transport
• Maximum indicating pointer reading for pre-selected forces or to maintain maximum force readings
• TM and LH models are 100% tested to verify accuracy within a ± 2% range. If your application requires a calibrated tool, it must be submitted for certification testing. Certification is NOT available from Enerpac.

EP LH5006K

• Type: Service Kit

• SubTypes: Seal Kit

EP MB1

• Type: Manifold
• Max Bar: 350
• Max PSI: 5000

• Product Group: Manifolds, Pumps
• Product Line: Work Holding Tools
• Series: MB - Manifold
• SubTypes: Single Station Manifold

• Single station manifolds allow installation of VSS and VST-series positive seal control valves or other D03 valves.
• Ideal in applications where independent control of multiple cylinders is required.
• Mounting patterns for: VSS/VST Valves (D03 or CETOP 3); VE Valves (D03 or CETOP 3); VP03 Valves (D03 or CETOP 3); VMMD Valves (D03 or CETOP 3)
• Manifolds allow use of accessories, such as pressure switches and gauges
• Each non-used valve station on manifolds must be sealed with MC cover plate

EP OIL55HF

• Type: Hydraulic Oil

• Product Group: Pumps