Hydraullic Units

EP G2537R

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G385044

• Type: Service Kit

• SubTypes: Stop Ring

EP G4039L

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G4089L

This G-Series Liquid Filled Pressure Gauge contains glycerin to protect pressure sensing parts from vibration, sudden pressure changes, and moisture.

The dual scale face shows both psi and bar readings, and the extensive range includes a wide selection of models with maximum working pressures ranging from 100 to 15000 psi (7 to 1000 bar).

When using your gauges for high-cycle applications, we recommend using gauge snubbers or needle valves.

• Type: Gauge
• Max Bar: 1000
• Max PSI: 15000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: G
• SubTypes: Pressure Gauge

• Calibrated in dual scale reading in psi and bar
• All pressure sensing parts sealed and dampened by glycerine for long life
• Includes safety blow-out disk and pressure equalizing membrane
• Gauge snubbers or needle valves recommended for high cycle applications

EP G836028

• Type: Service Kit

• SubTypes: Screw

EP G899044

• Type: Service Kit

• SubTypes: Ring

EP GA4

• Type: Gauge Accessory
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: GA
• SubTypes: Gauge Adaptor

• For easy mounting of a pressure gauge into your system
• Male end screws into pump or cylinder port, female end accepts hose or coupler, third port is for gauge connection
• Simplifies gauge installation and reading

EP GF120B

GF-Series gauges are calibrated with dual scales for reading for pressure and force.

The force readings allow you to measure external loads, such as those supported by a cylinder or jack, or the force used for pressing parts.

The glycerin within the gauge protects pressure sensing parts from vibration, sudden changes in pressure and from moisture.

The GF-Series Gauges feature a 4” (100 mm) diameter face for easy readability, and a stainless-steel casing for corrosion resistance.

• Type: Gauge
• Max Bar: 700
• Max PSI: 10000

• Product Group: Gauges, Pumps
• Product Line: Industrial Tools
• Series: GF
• SubTypes: Force and Pressure Gauge

• Excellent readability; 4 inch diameter gauge face.
• Fast, easy installation
• Stainless steel gauge cases for corrosion resistance
• Calibrated with dual scale reading for psi and bar

EP GF-813P

EP H-7220

EP H7230

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38” (6.4 and 9.7mm), and connection types include ¼” NPTF, â…œ" NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP H9203

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory’ needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38” (6.4 and 9.7mm). Connection types available are ¼” NPTF, â…œ" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools, Work Holding Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP H9206Q

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory’ needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38” (6.4 and 9.7mm). Connection types available are ¼” NPTF, â…œ" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP H9206S

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory’ needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38” (6.4 and 9.7mm). Connection types available are ¼” NPTF, â…œ" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP H9250

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory’ needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38” (6.4 and 9.7mm). Connection types available are ¼” NPTF, â…œ" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP H-9306

EP H-9320

EP H-9330

EP H9350

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory’ needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38” (6.4 and 9.7mm). Connection types available are ¼” NPTF, â…œ" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP HA20

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Line: Hydraulic Tools
• Series: HA
• SubTypes: Industrial Grade Hose

EP HB7206

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38” (6.4 and 9.7mm), and connection types include ¼” NPTF, â…œ" NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HB7206QB

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38” (6.4 and 9.7mm), and connection types include ¼” NPTF, â…œ" NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP HC-7220

EP HC9210C

H900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low ‘memory' needed for long hose runs.

Each hose contains two layers of steel wire braids covered by a rubber sleeve to ensure a long life in tough working environments.

Internal diameters available are 0.25 and 0.38" (6.4 and 9.7mm). Connection types available are 1/4" NPTF, 3/8" NPTF, and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps improve durability and hose life.

• Type: Hose
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H900
• SubTypes: Heavy-duty Rubber Hose

• Crimped-on rubber strain relief for improved life and durability
• Maximum working pressure of 10,000 psi
• Rubber coated with two layers of steel wire braids
• Designed to comply with Material Handling Institute IJ-100 hose specification
• Flexible, with little " memory" , is the best choice for long hose runs

EP HCL-1006