Hydraullic Units

EP BSH7536

36 mm Socket for 3/4 in. Square Drive

• Type: Torque Wrench Accessory

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: BSH
• SubTypes: Socket - Metric

EP BSH7546

1 13/16 in. (46 mm) Socket for 3/4 in. Square Drive

• Type: Torque Wrench Accessory

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: BSH
• SubTypes: Socket - Imperial Metric

EP BSS4253D

BELLOWS
Pull Cylinders (BRP-Series and equivalent)

• Type: Service Kit

• SubTypes: Repair Part

EP BSS4261D

INSERT
Pull Cylinders (BRP-Series and equivalent)

• Type: Service Kit

• SubTypes: Repair Part

EP BSS5509D

SPRING
ZA-Series

• Type: Service Kit

• SubTypes: Spring Kit

EP BSS6350D

EYE NUT ASSY
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Nut

EP BSS6608D

PULL SPRING
Wedgie and Spread Cylinders (A and WR-Series)

• Type: Service Kit

• SubTypes: Spring

EP BSS6609D

PULL SPRING
Wedgie and Spread Cylinders (A and WR-Series)

• Type: Service Kit

• SubTypes: Spring

EP C211

3/8in NPTF, High Flow Ram Coupler Half with Dust Cap
These premium grade couplers provide maximum fluid flow and are plated to resist corrosion. Cylinder Half Couplers have male 3/8 NPTF threads & high strength rubber dust caps

EP C432108

LOCK WASHER

• Type: ERP

• SubTypes: Repair Part

EP C898166

ADAPTOR
Ultra High Pressure Hand Pumps

• Type: Service Kit

• SubTypes: Adaptor

EP CA561024

DRAIN COCK
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Repair Part

EP CA563024

FILLER PLUG
Single-Acting Cylinders (RC-Series and equivalent)

• Type: Service Kit

• SubTypes: Plug

EP CA737900

BOLSTER ASSEMBLY,
H-Frame Presses (IP-Series)

• Type: Service Kit

• SubTypes: Bolster Assembly

EP CAE1060055-1A

ACORN NUT M6

• Type: Pump Accessory

EP CATS100

Tilt Saddle for 50-100 Ton HCL and RC Series Cylinders, and 50-75 Ton RR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS101

Tilt Saddle for 100 Ton HCG, HCR and RAR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS12

Tilt Saddle for 10-15 Ton RC Series Cylinders, and 10 Ton RR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS150

Tilt Saddle for 100 Ton RAC Series Cylinders, and 150 Ton HCG, HCR and RAR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS300

Tilt Saddle for 250 and 300 Ton HCG, HCL and HCR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS50

Tilt Saddle for 50 Ton HCG, HCR, RAC and RAR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS52

Tilt Saddle for 25-30 Ton RC Series Cylinders, and 30 Ton RR Series Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CATS53

Tilt Saddle for RCS201, RCS302 and RCS502 Cylinders
The use of a tilt saddle can extend the life of an Enerpac cylinder. Hydraulic cylinders are built to ensure efficient and safe use time after time, but even the toughest cylinders can be damaged by an excessive side load. Side loading can occur even when the load is vertically placed on top of the cylinder, when cylinders are extended too far - (especially long stroke cylinders), or when the saddle on the end of the plunger fails to make sufficient contact with the load. Greater contact can be achieved using Enerpac Tilt Saddles.

• Type: Cylinder Accessories

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: CATS
• SubTypes: Tilt Saddle

• With safety and convenience in mind the new tilt saddles are designed to allow bolting to the cylinder - which means they can be used safely in any orientation without the risk of the saddle dropping off.
• CATS-Tilt Saddles use a nitrocarburization surface treatment for improved corrosion protection, helping to maintain a professional look through their usage life.

EP CB108005SR

BASE

• Type: ERP

• SubTypes: Repair Part

EP CB241218W

Treadle-Air Pumps
PA-Series

• Type: Service Kit

• SubTypes: Repair Part