Hose, Valves, Fittings

GG EC4D71

GG EC5J41

E-FLO PUMP,DC,X2,3000CC,SEALED

Graco EC5J41 E-Flo DC 4-Ball Electric Circulation Pump, 3000cc, 2 x 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand

E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.

• Advanced model lets you easily connect and manage multiple pumps with a single control module.
• Integrated runaway protection prevents pump from premature wear and costly material loss.
• Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second.
• Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne.
• Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.

GG EC8J41

GG H55003

GG LC0886

GG M70399

GG RM-856-04

GG SA907

GG V25AB000BA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/SOL, AMB

Graco V25AB000BA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Ball/Seat

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): N/A
• Nozzle Size (mm): N/A

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

GG V25AB000DA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/RM, AMB

Graco V25AB000DA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Remote Mount Solenoid

The iQ Ball and Seat Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Perfect for standard on/off applications
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Ball/Seat

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): N/A
• Nozzle Size (mm): N/A

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

GG V25DT000DA

GG V25DT060BA

IQ TIP SEAL VALVE, 25, 1.0/T, 060, ADJ/SOL, AMB

Graco V25DT060BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.039
• Nozzle Size (mm): 1.0

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

GG V25DT200BA

IQ TIP SEAL VALVE, 25, 1.0/T, 200, ADJ/SOL, AMB

Graco V25DT200BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 7.87in (200mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.039
• Nozzle Size (mm): 1.0

• Outlet Block Length (in): 7.9
• Outlet Block Length (mm): 200

GG V25GT060DA

IQ TIP SEAL VALVE, 25, 1.7/T, 060, ADJ/RM, AMB

Graco V25GT060DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 2.36in (60mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): 0.067
• Nozzle Size (mm): 1.7

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

GG V25GT200DA

IQ TIP SEAL VALVE, 25, 1.7/T, 200, ADJ/RM, AMB

Graco V25GT200DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 7.87in (200mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): 0.067
• Nozzle Size (mm): 1.7

• Outlet Block Length (in): 7.9
• Outlet Block Length (mm): 200

GG YB2841

E-FLO DCI PUMP, 3HP1-48B0-2500USS-S-0

Graco YB2841 E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 2500 cc configuration powers maximum continuous flow rate.

• Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 1.5

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 13.2
• Maximum Flow Rate (L/min): 50

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 19
• Maximum Working Pressure (kPa): 1930.6
• Maximum Working Pressure (MPa): 1.9
• Maximum Working Pressure (psi): 280

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 2500

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 2500

GG YB3341

E-FLO DCI PUMP, 5HP1-48B0-4000USS-S-0

Graco YB3341 E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 4000 cc configuration powers maximum continuous flow rate.

• An annual oil change is all that's needed to keep the 5 horse power (HP) motor running efficiently.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 0.95

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 21.1
• Maximum Flow Rate (L/min): 80

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 20.7
• Maximum Working Pressure (kPa): 2068.5
• Maximum Working Pressure (MPa): 2
• Maximum Working Pressure (psi): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 4000

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 4000

GG YB4441

E-FLO DCI PUMP, 5HP1-48B0-3000USS-S-0

Graco YB4441 E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 3000 cc configuration powers maximum continuous flow rate.

• An annual oil change is all that's needed to keep the 5 horse power (HP) motor running efficiently.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 1.3

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 15.9
• Maximum Flow Rate (L/min): 60

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 28
• Maximum Working Pressure (kPa): 2758
• Maximum Working Pressure (MPa): 2.8
• Maximum Working Pressure (psi): 400

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 3000

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 3000

GV 1005371

GV 121538

GV 259764

GV 260924

GV 345067

GV 390445

HL B3VH-6T-S316