Hose, Valves, Fittings
FITTING, TEE, 9/16 MJ(2) X 9/16 SAE
GG 129759
GG 129759
FITTING, TEE, 9/16 MJ(2) X 9/16 SAE
Fitting - Tee, 9/16 MJ(2) X 9/16 SAE For use with Electric Grease Jockey System Installation Kits. Mainline Tees (3)
$7.85
FITTING, STRAIGHT, 9/16MJ X 9/16SAE
GG 129763
GG 129763
FITTING, STRAIGHT, 9/16MJ X 9/16SAE
Electric Grease Jockey™ Automatic Lubrication System Main Line Fitting - Straight Connector For use with Electric Grease Jockey Automatic Lubrication System. Straight Connector
$2.80
FITTING, ELBOW, 1/4
GG 15M045
GG 15M045
FITTING, ELBOW, 1/4
Pipe Fitting - 90° Street Elbow, 1/4 Female x 1/4 Male threads, Steel These quality-produced tube and pipe fittings are designed for use with GRACO® lubricating systems.90º Street Elbow
1/4 inch (6.4 mm) Female x 1/4 inch (6.4 mm) Male, Steel
Lubriquip part number 509-113-000 Trabon part number 9113
$14.60
FITTING, PUSH TO CONNECT, 1/4"
GG 17B880
GG 17B880
FITTING, PUSH TO CONNECT, 1/4"
GL-32, GL-33, GL-42, and GL-43 Outlet Fitting - 1/4 in. OD Tube, Push-to-Connect For use with GL-32, GL-33, GL-42, and GL-43 Injectors.1/4 OD tube, push to connect
$12.40
FITTING, ELBOW, STREET, 1/8 NPT BSPT
GG 17K061
GG 17K061
FITTING, ELBOW, STREET, 1/8 NPT BSPT
Adapter, 1/8 NPT Female x 1/8 BSPT Male Elbow1/8 NPT female x 1/8 BSPT male elbow
$32.10
FITTING, ADPTR LG 1/8 NPT TO BSPT
GG 17K062
GG 17K062
FITTING, ADPTR LG 1/8 NPT TO BSPT
Adapter, 1/8 NPT female x 1/8 BSPT male long1/8 NPT female x 1/8 BSPT male long
$32.40
FITTING, PTC, 1/4"
GG 17L440
GG 17L440
FITTING, PTC, 1/4"
CSP Outlet Fitting - Nylon Tube Push-To-Connect Stud - 1/4 inch OD Tube x M10 with Check Valve, 625 psi For use with CSP Valves.Push-to-Connect Fitting
1/4 inch OD tube x M10 with check valve, 625 psi (4.31 MPa, 43.1 bar)
$8.15
FITTING, PTC, 1/4", WITH M10
GG 17L441
GG 17L441
FITTING, PTC, 1/4", WITH M10
CSP Outlet Fitting - G-Lock Push-To-Connect Stud - 1/4 inch Hose Stud x M10 with Check Valve, 2000 psi For use with CSP Valves.Push-to-Connect Fitting
1/4 inch hose stud x M10 with check valve, 2000 psi (13.79 MPa, 137.9 bar)
$10.00
FITTING, PTC, 1/4", WITH 1/8" NPT
GG 17L442
GG 17L442
FITTING, PTC, 1/4", WITH 1/8" NPT
CSP Outlet Fitting - G-Lock Push-To-Connect Stud - 1/4 inch Hose Stud x 1/8 inch NPT male straight, 2000 psi For use with CSP Valves.Push-to-Connect Fitting
1/4 inch hose stud x 1/8 inch NPT male straight, 2000 psi (13.79 MPa, 137.9 bar)
$11.00
FITTING, PTC, 1/4", ELBOW, W/ 1/8 NPT
GG 17L652
GG 17L652
FITTING, PTC, 1/4", ELBOW, W/ 1/8 NPT
CSP Lubrication Point Fitting - Push-To-Connect Stud - 1/4 inch OD Tube x 1/8 inch NPT male 90°, 625 psi For use with CSP Valves.Push-to-Connect Fitting
1/4 inch OD tube x 1/8 inch NPT male 90°, 625 psi (4.31 MPa, 43.1 bar)
$9.40
FITTING, PTC, 1/4", W/ 1/8 NPT
GG 17L653
GG 17L653
FITTING, PTC, 1/4", W/ 1/8 NPT
CSP Lubrication Point Fitting - Push-To-Connect Stud - 1/4 inch OD tube x 1/8 inch NPT male straight, 625 psi For use with CSP Valves.Push-to-Connect Fitting
1/4 inch OD tube x 1/8 inch NPT male straight, 625 psi (4.31 MPa, 43.1 bar)
$6.75
FITTING, COMPRESSION, 1/4", W/ CHECK
GG 17P066
GG 17P066
FITTING, COMPRESSION, 1/4", W/ CHECK
CSP Outlet Fitting - 1/4” Compression Fitting with Check Valve, 1000 psiCompression Fitting with check valve, 1/4 inch tube, 1000 psi (6.9 MPa, 69 bar)
$13.20
VALVE, BALL
GG 237530
GG 237530
VALVE, BALL
Low Pressure Ball Valve compatible with stainless steel, catalyst and waterborne materials, 3/8 in. npt(m) x 1/4 in. npt(m)Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.
Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials Many different connection options to meet your specific needs
$90.50
VALVE, BALL
GG 237535
GG 237535
VALVE, BALL
Graco 237535 Low Pressure Ball Valve compatible with stainless steel, catalyst and waterborne materials, 3/8 in. npt(f) x 3/8 in. npsm(m)
Use for on/off fluid control. Allows safer system operation by permitting relief of fluid pressure or isolation of components from pressure during maintenance. Ball vales must be used in the fully open or closed position. Do not throttle the valve - it could cause premature seal failure.
- Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
- Many different connection options to meet your specific needs
- Handle Type: Lever
- Inlet Size (cm): 0.9525
- Inlet Size (in): 3/8
- Inlet Size (mm): 9.525
- Inlet Thread Gender: Female
- Inlet Thread Type: NPT
- Maximum Working Pressure (bar): 35
- Maximum Working Pressure (kPa): 3500
- Maximum Working Pressure (MPa): 3.5
- Maximum Working Pressure (psi): 500
- Outlet Size (cm): 0.9525
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Outlet Thread Gender: Male
- Outlet Thread Type: NPSM
$128.00
KIT, 25' FLUID&AIR HOSE FP295
GG 24U578
GG 24U578
KIT, 25' FLUID&AIR HOSE FP295
Graco 24U578 Super-Flex Material and Air Hose Set, 25 ft
By increasing flexibility and maneuverability, Graco’s Super-Flex Hose Set enables you to work in tight confines and helps you increase the quality of finish you’re laying down.
- Super-Flex Fluid and Air Hose Set
The flexibility to get into tight spaces – focus on the task, not the tool!
Extremely lightweight in hand, which reduces fatigue
Connects directly to the gun for maximum flexibility
Flex Wrap hose skin protects from material buildup and increases hose durability
- Model: Super-Flex
- Series: Hose
- Hose Length (cm): 762
- Hose Length (ft): 25
- Hose Length (in): 300
- Hose Length (m): 7.6
- Hose Length (mm): 7600
- Maximum Working Pressure (bar): 227
- Maximum Working Pressure (kPa): 22700
- Maximum Working Pressure (MPa): 22.7
- Maximum Working Pressure (psi): 3300
$276.50
FITTING, TEE-UNION-5/16T
GG 556637
GG 556637
FITTING, TEE-UNION-5/16T
Union Tee, 5/16 in. (7.94 mm) Tube, Brass For use with Pneumatic Grease Jockey Systems. Union Tee 5/16 (7.94 mm) tube, Brass Lubriquip part number 435-420-030
$13.90
FITTING, ADAPTER, 5/16 T X 1/4 NPT
GG 556646
GG 556646
FITTING, ADAPTER, 5/16 T X 1/4 NPT
Fitting - Male Connector, 5/16 inch (7.94 mm) tube x 1/4 inch (6.35 mm) NPTF For use with Pneumatic Grease Jockey Systems. Brass Male Connector 5/16 inch (7.94 mm) tube x 1/4 inch (6.35 mm) NPTF Lubriquip part number 435-460-070
$5.25
FITTING, UNION, TUBE X 5/16
GG 556648
GG 556648
FITTING, UNION, TUBE X 5/16
Fitting - 5/16 inch (7.9 mm) Tube For use with Pneumatic Grease Jockey Systems. Brass Union 5/16 (7.9 mm) tube Lubriquip part number 435-470-040
$10.20
FITTING, ELB 1/4-28 X 1/8PM
GG 557954
GG 557954
FITTING, ELB 1/4-28 X 1/8PM
45° Street Elbow Adapter, 1/4-28 SAE Male x 1/8 NPTF Female Used with Grease Jockey systems to replace ball joint (drag link, tie rod) fittings, when a 45° elbow is needed. Adapter - 45° Street Elbow 1/4-28" SAE Male x 1/8" NPTF Female Zinc-Plated Steel Lubriquip part number 550-400-870
$16.50
COUPLING, ANCHOR CROSS 1/8
GG 560543
GG 560543
COUPLING, ANCHOR CROSS 1/8
Graco 560543 Cross Anchor Fitting, 1/8 in. NPSF
- Cross Anchor Fitting, 1/8 in. NPSF
- Lubriquip part number 509-189-000
- Trabon part number 9189
- Connection Type: Threaded
- Finish/Coating: Zinc
- For Use With: Hose
- Material: Steel
$53.50
INIFLEX VALVE, COMPACT COLOR, QS
GG FXCC0001S
GG FXCC0001S
INIFLEX VALVE, COMPACT COLOR, QS
IniFlex Color Stack, 1 non-circulation valve, Quick Socket outlet fitting type Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect directly to your proportioner system, use Quick Socket outlet and fittings. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.
$1,430.00
INIFLEX VALVE, COMPACT COLOR, QS
GG FXCC0002S
GG FXCC0002S
INIFLEX VALVE, COMPACT COLOR, QS
IniFlex Color Stack, 2 non-circulation valves, Quick Socket outlet fitting type Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect directly to your proportioner system, use Quick Socket outlet and fittings. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.
$2,170.00
INIFLEX VALVE, COMPACT COLOR
GG FXCC0003C
GG FXCC0003C
INIFLEX VALVE, COMPACT COLOR
IniFlex Color Stack, 3 non-circulation valves, IniFlex plug outlet fitting type Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect with other IniFlex components, simply remove the disposable shipping plug. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.
$2,600.00
INIFLEX VALVE, COMPACT COLOR, QS
GG FXCC0003S
GG FXCC0003S
INIFLEX VALVE, COMPACT COLOR, QS
IniFlex Color Stack, 3 non-circulation valves, Quick Socket outlet fitting type Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect directly to your proportioner system, use Quick Socket outlet and fittings. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.
$2,880.00
INIFLEX VALVE, COMPACT COLOR
GG FXCC0004C
GG FXCC0004C
INIFLEX VALVE, COMPACT COLOR
IniFlex Color Stack, 4 non-circulation valves, IniFlex plug outlet fitting type Whether you’re setting up a new automated finishing system or upgrading a current installation, IniFlex makes accommodating diverse requirements and budgets more flexible than ever before. IniFlex fits into almost any industrial automation application that requires compact color change valves. To connect with other IniFlex components, simply remove the disposable shipping plug. Color change valve assembly flushes cleanly without material dead spots, minimizing flushing times and solvent use. IniFlex color change valves are designed, manufactured, assembled, and factory-tested in the United States of America.
$3,330.00