Hose, Valves, Fittings

GG V25AB000BA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/SOL, AMB

Graco V25AB000BA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Ball/Seat

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): N/A
• Nozzle Size (mm): N/A

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

GG V25AB000DA

IQ BALL SEAT VALVE, 25, NPT/B, 000, ADJ/RM, AMB

Graco V25AB000DA iQ Dispense Valve, Ball/Seat, Ambient, NPT Tip, 0in (000mm) Nozzle, Remote Mount Solenoid

The iQ Ball and Seat Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Perfect for standard on/off applications
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Ball/Seat

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): N/A
• Nozzle Size (mm): N/A

• Outlet Block Length (in): NA
• Outlet Block Length (mm): NA

GG V25DT000DA

GG V25DT060BA

IQ TIP SEAL VALVE, 25, 1.0/T, 060, ADJ/SOL, AMB

Graco V25DT060BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 2.36in (60mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.039
• Nozzle Size (mm): 1.0

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

GG V25DT200BA

IQ TIP SEAL VALVE, 25, 1.0/T, 200, ADJ/SOL, AMB

Graco V25DT200BA iQ Dispense Valve, Tip-Seal, Ambient, 0.039in (1.0mm) Tip, 7.87in (200mm) Nozzle, Direct Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 5/16
• Air Inlet Thread Type: Push-to-Connect

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Direct Mount Solenoid
• Nozzle Size (in): 0.039
• Nozzle Size (mm): 1.0

• Outlet Block Length (in): 7.9
• Outlet Block Length (mm): 200

GG V25GT060DA

IQ TIP SEAL VALVE, 25, 1.7/T, 060, ADJ/RM, AMB

Graco V25GT060DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 2.36in (60mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 60mm nozzle is compatible with 60mm focal length vision systems

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): 0.067
• Nozzle Size (mm): 1.7

• Outlet Block Length (in): 2.4
• Outlet Block Length (mm): 60

GG V25GT200DA

IQ TIP SEAL VALVE, 25, 1.7/T, 200, ADJ/RM, AMB

Graco V25GT200DA iQ Dispense Valve, Tip-Seal, Ambient, 0.067in (1.7mm) Tip, 7.87in (200mm) Nozzle, Remote Mount Solenoid

The iQ Tip Seal Dispense Valve offers high reliability for single component sealant and adhesive dispensing applications.

• Maximize dispense time while minimizing maintenance costs and effort
• Delivers precise, consistent dispensing with clean starts and stops
• Ideal for low to high viscosity materials
• Easy repeatable mounting for robotic and automated applications.
• 200mm nozzle is compatible with 200mm focal length vision systems

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Ambient/Warm Melt/Hot Melt: Ambient
• Applicator Type: Tip-Seal

• Component Type: Single Component

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Gun Activation: Automatic

• Maximum Air Pressure (bar): 8.3

• Maximum Air Pressure (MPa): 0.83
• Maximum Air Pressure (psi): 120

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Maximum Fluid Pressure (bar): 276
• Maximum Fluid Pressure (MPa): 28
• Maximum Fluid Pressure (psi): 4000

• Mount Location: Remote Mount Solenoid
• Nozzle Size (in): 0.067
• Nozzle Size (mm): 1.7

• Outlet Block Length (in): 7.9
• Outlet Block Length (mm): 200

GG YB2841

E-FLO DCI PUMP, 3HP1-48B0-2500USS-S-0

Graco YB2841 E-Flo DCi 4-Ball Electric Pump, 2500cc, 3 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 2500 cc configuration powers maximum continuous flow rate.

• Modular 3 horse power (HP) motor enables the easy replacement of existing Graco pneumatic or hydraulic pump motors.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 1.5

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 13.2
• Maximum Flow Rate (L/min): 50

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 19
• Maximum Working Pressure (kPa): 1930.6
• Maximum Working Pressure (MPa): 1.9
• Maximum Working Pressure (psi): 280

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 2500

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 2500

GG YB3341

E-FLO DCI PUMP, 5HP1-48B0-4000USS-S-0

Graco YB3341 E-Flo DCi 4-Ball Electric Pump, 4000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 4000 cc configuration powers maximum continuous flow rate.

• An annual oil change is all that's needed to keep the 5 horse power (HP) motor running efficiently.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 0.95

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 21.1
• Maximum Flow Rate (L/min): 80

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 20.7
• Maximum Working Pressure (kPa): 2068.5
• Maximum Working Pressure (MPa): 2
• Maximum Working Pressure (psi): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 4000

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 4000

GG YB4441

E-FLO DCI PUMP, 5HP1-48B0-3000USS-S-0

Graco YB4441 E-Flo DCi 4-Ball Electric Pump, 3000cc, 5 HP, SST Ultralife Lower, Tri-Clamp, Basic Controls, Stand/Wall Mount

Dual control (DC) circulation pump with intelligence (i) drives efficiency and sustainability in high volume industrial paint systems. The 4-ball lower's 3000 cc configuration powers maximum continuous flow rate.

• An annual oil change is all that's needed to keep the 5 horse power (HP) motor running efficiently.
• Three-phase electric motor has an input voltage of 380 to 480 VAC (volts alternating current).
• DCi Link connects via ethernet to your factory's PLC (programmable logic controller), simplifying integration and truly making your pump intelligent.
• Floor/Wall stand has compact footprint with a space-saving vertical design.
• Dual control (DC) allows operation in flow mode for constant circulation or pressure mode for dynamic speed adjustments, whatever your project entails.
• ATEX, IECEx, JPNEx, CCCEx, and KCS certifications confirm safe operation worldwide.
• Stainless steel (SST) lower is coated with Ultralife for extensive durability.

• Model: E-Flo
• Series: Dci 4-Ball

• Application: Circulation

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC, Waterborne

• Control Options: Basic

• Cycles Per Gallon: 1.3

• Fluid Inlet Size (in): 1.5
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Type: Tri-Clamp

• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Type: Tri-Clamp

• Input Voltage (V ac): 380 - 480

• Lower Type: Sealed Ultralife

• Material: Stainless Steel

• Maximum Continuous Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 15.9
• Maximum Flow Rate (L/min): 60

• Maximum Input Amperage (A): 20

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Working Pressure (bar): 28
• Maximum Working Pressure (kPa): 2758
• Maximum Working Pressure (MPa): 2.8
• Maximum Working Pressure (psi): 400

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: AC

• Mount Type: Wall or Stand Mount

• Output Per Cycle (cm cu ): 3000

• Phase: 3

• Portable: Non-Portable

• Power Rating (HP): 5

• Pump Size (cc): 3000

GV 1005371

GV 121538

GV 259764

GV 260924

GV 345067

GV 390445

HL B3VH-6T-S316

HL BVF-6N-S316

HL BVH-10T-S316

HL BVH-10T-SL-SS

HL BVH-12T-SL-SS

HL BVH-12T-SS

HL BVH-8T-S316

HL BVHD-3/4-SL-S316

HL CAF10-8NSS