Heated Accessories
REACTOR HEATED HOSE, 25', 3/8, W/O CABLE
GG 261328
REACTOR HEATED HOSE, 25', 3/8, W/O CABLE
25 ft (7.6 m) Heated 2 Component Low Pressure Hose with 3/8 in (9.5 mm) Inside Diameter and Ground WireGraco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
REACTOR HEATED HOSE, 1/4X3/8, DUAL CABLE
GG 261337
REACTOR HEATED HOSE, 1/4X3/8, DUAL CABLE
Graco 261337 50 ft (15 m) Heated Custom Application 2 Component Hose with 3/8 (9.5 mm) and 1/4 in (6.3 mm) Inside Diameter
Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
Application: For Reactor proportioners.- New multi-strand copper heating element has greatly increased hose quality:
- Copper-heated hoses are designed specifically for use with Graco proportioners
- Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
- Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
- Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
- Helix-design whip hose uses braided copper wires for added flexibility and longer life
Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses
- Model: Reactor Heated Hoses
- Series: Specialty
- For Use With: Plural Component Proportioners
- Hose Inside Diameter (in): 1/4
- Hose Inside Diameter (mm): 6.35
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (MPa): 24.1
- Maximum Working Pressure (psi): 3500
Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old
GG 2000187
Therm-O-Flow Kit, Wiper, Seal, Grn, Blk, 200, Old
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old
GG 2000188
Therm-O-Flow Kit, Wiper, Seal, Dual Green, 200, Old
Therm-O-Flow, Kit, Wiper, Seal, Tof20, Green
GG 2000706
Therm-O-Flow, Kit, Wiper, Seal, Tof20, Green
Hfr Hose, Htd, A, 50', 3/8", 3500 psi, Cs
GG 24E915
Hfr Hose, Htd, A, 50', 3/8", 3500 psi, Cs
Hfr Hose, Htd, B, 50', 3/8", 3500 psi, Cs
GG 24E916
Hfr Hose, Htd, B, 50', 3/8", 3500 psi, Cs
Hfr Hose, Whip, Htd, 1/4X1/4, 10', Cs, S
GG 24H076
HFR HOSE,WHIP,HTD,1/4X1/4,10',CS,S
Graco 24H076 10 ft Carbon Steel Single Heat Zone Whip Hose
Hfr Hose, Whip, Htd, 3/8X3/8, 10', Ss, D
GG 24H083
Hfr Hose, Whip, Htd, 3/8X3/8, 10', Ss, D
THERMOLAZER SPRAYER, 200TC, 6" FLEXDIE
GG 17A335
THERMOLAZER SPRAYER, 200TC, 6" FLEXDIE
Graco 17A335 ThermoLazer 200TC Thermoplastic Striping System, 6 in FlexDie
The ThermoLazer 200TC is the premiere solution for smaller thermoplastic striping jobs. The FlexDie is built with the same precision and functionality as its big brother, the SmartDie II. Solid steel construction, built-in die adjustment and direct flames will give you great lines every time.
Application: The smaller, more portable ThermoLazer 200TC is ideal for striping contractors who already have premelt kettle systems.- FlexDie
Delivers excellent line quality with exclusive deep-die, all steel construction and a no-tools change out design
- 200 lb Material Kettle
Easy-to-fill cylindrical kettle allows for precise heating of thermoplastic material, and its no-tool change-out design lets you switch colors fast
- 40 lb Bead Hopper
Perfectly matched to the material kettle with a superior flow design
- Tri-Wheel System
Dual solid front and single solid rear wheels provide smooth, quiet operation
- Adjustable Operator Handle
Handle easily adjusts to multiple heights
- Adjustable Front Pointer
Easily adjusts for all size dies for following all marks and creating straight lines
- Model: ThermoLazer
- Series: 200TC
- Bead System: Gravity Bead System
- Compatible Material: Thermoplastics
- Compatible Surfaces: Pavement
- Includes: 6 in FlexDie
- Maximum Working Pressure (bar): 17.24
- Maximum Working Pressure (kPa): 172.4
- Maximum Working Pressure (psi): 250
- Number of Colors: One Color
- Number of Hoppers: 1
Hose, Htd, 3000 psi, 6 ft, -16Jic Sbe
GG 17J666
Hose, Htd, 3000 psi, 6 ft, -16Jic Sbe
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
GG 24Y240
REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT
50 ft x 3/8 in Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 2Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
Resistance Temperature Detector (RTD)
- Graco’s latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
GG 24Y679
REACTOR HEATED HOSE, X-WRAP, 3/8, 50'
50 ft x 3/8 in Heated Hose, 3500 psi, Thermocouple, Xtreme-Wrap, Reactor 1Graco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses
New Xtreme-Wrap Scuff Guard
- Form fitting to the hose, no more baggy excess material
- Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
- Sheds surface moisture and won't absorb water to weigh down the hose bundle; will not freeze solid in cold temperatures
- Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
Joint Protectors
- Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
REACTOR HEATED HOSE, 3500, W/SCUFF, 1/2", 50'
GG 256548
REACTOR HEATED HOSE, 3500, W/SCUFF, 1/2", 50'
50 ft (15 m) High Pressure Heated Hose with Thermocouple Scuff Guard and 1/2 in Inside DiameterGraco’s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.
For Reactor proportioners.New multi-strand copper heating element has greatly increased hose quality:
- Provides 10-times* the flex life compared to previous flat copper heating element
- Long-term, even heating without hot spots
- Backwards compatible with existing Reactor heated hoses