Airpower | GRACO INC. S10595 branded products

GG GC1922

Spring

$6.20

GG GC1923

Spring

$6.85

Kit, Repair, Standard, Probler 2

GG GC1937

Kit, Repair, Standard, Probler 2

$207.50

GG GC1946

Kit, Side, Seal

$89.00

GG GC1938

Kit, Spray, Flat, Probler 2

$138.00

GG GC1950

Kit Repair Premium

$488.00

GG GC2052

Washer Flat STD #8

$2.15

GG GC2058

Packing, O-Ring

$6.65

GG GC2056

O-Ring, Viton, 2-009

$2.35

GG GC2059

O-Ring

$20.30

GG GC2060

Viton O-Ring

$5.20

GG GC2079

Set Screw

$5.15

GG GC2187

Screw, SHDC, SS, 190-32x

$7.50

Fitting, Pipe Nipple, Hex, 1/8 x 1/8 NPT

GG GC2196

Fitting, Pipe Nipple, Hex, 1/8 x 1/8 NPT

$9.80

GG GC2248

Screw

$3.95

GG GC2494

Kit, Seal, P2

$21.60

GG GC2495

Kit, Seal Housing, P2

$105.50

GG GC2512

Kit, Insert, Mix Chamber, 02

$42.20

GG GC2639

Kit, Tip, Spray, 625

$181.00

GG GC251A

Kit, Insert, Mix Chamber, Aa

$42.20

GG GC2498

Kit, Side Seal, P2

$27.90

GG GCP2R0

P2 GUN

Probler P2 Gun Assembly with 00 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced design

$4,630.00

Kit, Mix Chamber, P2, Rnd, 01

GG GC2501

Kit, Mix Chamber, P2, Rnd, 01

$324.00

Kit, Tip, Spray, 519

GG GC2630

Kit, Tip, Spray, 519

$0.00

Kit, Mix Chamber, P2, Rnd, 02

GG GC2502

Kit, Mix Chamber, P2, Rnd, 02

$324.00

Kit, Insert, Mix Chamber, 00

GG GC2510

Kit, Insert, Mix Chamber, 00

$42.20

Kit, Spray Tip, Tc, 6250

GG GC2605

Kit, Spray Tip, Tc, 6250

$181.00

Kit, Spray Tip, Tc, 6240

GG GC2604

Kit, Spray Tip, Tc, 6240

$181.00

Kit, Spray Tip, Tc, 3625

GG GC2592

Kit, Spray Tip, Tc, 3625

$181.00

Probe P2 Gun - 01 Tip

GG GCP2R1

P2 GUN

Probler P2 Gun Assembly with 01 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced design

$4,630.00

Kit, Insert, Mix Chamber, 01

GG GC2511

Kit, Insert, Mix Chamber, 01

$42.20

Kit, Tip, Spray, 515

GG GC2629

Kit, Tip, Spray, 515

$0.00

Kit, Spray Tip, Tc, 5250

GG GC2601

Kit, Spray Tip, Tc, 5250

$181.00

Gun, P2

GG GCP2R3

P2 GUN

Probler P2 Gun Assembly with 03 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced design

$4,630.00

Kit, Mix Chamber, P2, Rnd, Aa

GG GC250A

Kit, Mix Chamber, P2, Rnd, Aa

$324.00

Kit, Filter, 40 Mesh, P2

GG GC2496

Kit, Filter, 40 Mesh, P2

$16.60

Gun, Probler P2

GG GCP2RA

P2 GUN

Graco GCP2RA Probler P2 Gun Assembly with AA Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

Application: For high output spray polyurethane foam and polyurea applications.

Easy daily maintenance
Responsive trigger action
Easy-to-replace mix chamber insert
Ergonomic handle and balanced design

Model: P2
Series: Standard

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4-18
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPSM

Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.11125
Component B Inlet Size (in): 7/16-18
Component B Inlet Size (mm): 11.1125
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.091
Fluid Orifice Size (in): 0.036
Fluid Orifice Size (mm): 0.91

Gun Activation: Manual
Gun Series: Standard
Gun Type: Air-Purge
Gun Weight (g): 1770
Gun Weight (kg): 1.77
Gun Weight (lb): 3.9
Gun Weight (oz): 32.4

Maximum Air Inlet Pressure (bar): 7.6
Maximum Air Inlet Pressure (kPa): 760
Maximum Air Inlet Pressure (MPa): 0.76
Maximum Air Inlet Pressure (psi): 110
Maximum Air Pressure (bar): 7.6

Maximum Air Pressure (kPa): 760
Maximum Air Pressure (MPa): 0.76
Maximum Air Pressure (psi): 110

Maximum Flow Rate (kg/min): 18
Maximum Flow Rate (lb/min): 40

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 221
Maximum Fluid Working Pressure (MPa): 22.1
Maximum Fluid Working Pressure (psi): 3200

Minimum Air Inlet Pressure (bar): 6.2
Minimum Air Inlet Pressure (kPa): 620
Minimum Air Inlet Pressure (MPa): 0.62
Minimum Air Inlet Pressure (psi): 90

Minimum Flow Rate (kg/min): 1.4
Minimum Flow Rate (lb/min): 3

Mix Chamber: AA (0.036)

Overall Height (cm): 12.1
Overall Height (in): 4.75
Overall Height (mm): 121
Overall Length (cm): 7.9
Overall Length (in): 3.125
Overall Length (mm): 79
Overall Width (cm): 17.4
Overall Width (in): 6.875
<

$4,630.00

Kit, Spray Tip, Tc, 2640

GG GC2586

Kit, Spray Tip, Tc, 2640

$181.00

Kit, Mix Chamber, P2, Rnd, 00

GG GC2500

Kit, Mix Chamber, P2, Rnd, 00

$324.00

Gun, Probler Elite 00P2

GG GCP3R0

P2 GUN, ASSY, GUN, PROBLER ELITE

Probler P2 Elite Gun Assembly with 00 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced designAllows use of additional accessoriesAlternate side block hose routingsAllows filters to be easily removed

$4,630.00

Kit, Tip, Spray, 511

GG GC2627

Kit, Tip, Spray, 511

$181.00

Gun Assy, Probler P2 Elite

GG GCP3R1

P2 GUN, ASSY, GUN, PROBLER ELITE

Probler P2 Elite Gun Assembly with 01 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced designAllows use of additional accessoriesAlternate side block hose routingsAllows filters to be easily removed

$4,630.00

GUN, ASSY, GUN, PROBLER P2 ELITE

GG GCP3R2

P2 GUN, ASSY, GUN, PROBLER ELITE

Probler P2 Elite Gun Assembly with 02 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced designAllows use of additional accessoriesAlternate side block hose routingsAllows filters to be easily removed

$4,630.00

Gun Assy, Probler P2 Elite

GG GCP3R3

P2 GUN, ASSY, GUN, PROBLER ELITE

Graco GCP3R3 Probler P2 Elite Gun Assembly with 03 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

Application: For high output spray polyurethane foam and polyurea applications.

Easy daily maintenance
Responsive trigger action
Easy-to-replace mix chamber insert
Ergonomic handle and balanced design
Allows use of additional accessories
Alternate side block hose routings
Allows filters to be easily removed

Model: P2
Series: Elite

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4-18
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPT

Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.11125
Component B Inlet Size (in): 7/16-18
Component B Inlet Size (mm): 11.1125
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.152
Fluid Orifice Size (in): 0.060
Fluid Orifice Size (mm): 1.52

Gun Activation: Manual
Gun Series: Elite
Gun Type: Air-Purge
Gun Weight (g): 1770
Gun Weight (kg): 1.77
Gun Weight (lb): 3.9
Gun Weight (oz): 32.4

Maximum Air Inlet Pressure (bar): 7.6
Maximum Air Inlet Pressure (kPa): 760
Maximum Air Inlet Pressure (MPa): 0.76
Maximum Air Inlet Pressure (psi): 110
Maximum Air Pressure (bar): 7.6

Maximum Air Pressure (kPa): 760
Maximum Air Pressure (MPa): 0.76
Maximum Air Pressure (psi): 110

Maximum Flow Rate (kg/min): 18
Maximum Flow Rate (lb/min): 40

Maximum Fluid Pressure (bar): 220
Maximum Fluid Pressure (kPa): 22000
Maximum Fluid Pressure (MPa): 22
Maximum Fluid Pressure (psi): 3200
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 221
Maximum Fluid Working Pressure (MPa): 22.1
Maximum Fluid Working Pressure (psi): 3200

Minimum Air Inlet Pressure (bar): 6.2
Minimum Air Inlet Pressure (kPa): 620
Minimum Air Inlet Pressure (MPa): 0.62
Minimum Air Inlet Pressure (psi): 90

Minimum Flow Rate (kg/min): 1.4
Minimum Flow Rate (lb/min): 3

Mix Chamber: 03 (.060)

Overall Height (cm): 12.1
Overall Height (in): 4.75
Overall Height (mm): 121
Overall Length (cm): 7.9
Over

$4,630.00

Gun, P2, Automatic

GG GCP4R0

P2 GUN, AUTOMATIC

Graco GCP4R0 Probler P2 Automatic Gun with 00 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

Application: For high output spray polyurethane foam and polyurea applications.

Easy daily maintenance
Responsive trigger action
Easy-to-replace mix chamber insert
Ergonomic handle and balanced design

Model: P2
Series: Auto

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4-18
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Male
Air Inlet Thread Type: NPT

Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.11125
Component B Inlet Size (in): 7/16-18
Component B Inlet Size (mm): 11.1125
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.074
Fluid Orifice Size (in): 0.029
Fluid Orifice Size (mm): 0.74

Gun Activation: Automatic
Gun Series: Automatic
Gun Type: Air-Purge
Gun Weight (g): 1770
Gun Weight (kg): 1.77
Gun Weight (lb): 3.9
Gun Weight (oz): 32.4

Maximum Air Inlet Pressure (bar): 7.6
Maximum Air Inlet Pressure (kPa): 760
Maximum Air Inlet Pressure (MPa): 0.76
Maximum Air Inlet Pressure (psi): 110
Maximum Air Pressure (bar): 7.6

Maximum Air Pressure (kPa): 760
Maximum Air Pressure (MPa): 0.76
Maximum Air Pressure (psi): 110

Maximum Flow Rate (kg/min): 18
Maximum Flow Rate (lb/min): 40

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 221
Maximum Fluid Working Pressure (MPa): 22.1
Maximum Fluid Working Pressure (psi): 3200

Minimum Air Inlet Pressure (bar): 6.2
Minimum Air Inlet Pressure (kPa): 620
Minimum Air Inlet Pressure (MPa): 0.62
Minimum Air Inlet Pressure (psi): 90

Minimum Flow Rate (kg/min): 1.4
Minimum Flow Rate (lb/min): 3

Mix Chamber: 00 (.029)

Overall Height (cm): 12.1
Overall Height (in): 4.75
Overall Height (mm): 121
Overall Length (cm): 7.9
Overall Length (in): 3.125
Overall Length (mm): 79
Overall Width (cm): 17.4
Overall Width (in): 6

$6,930.00

Gun, Assy, Probler P2 Elite

GG GCP3RA

P2 GUN, ASSY, GUN, PROBLER ELITE

Probler P2 Elite Gun Assembly with AA Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced designAllows use of additional accessoriesAlternate side block hose routingsAllows filters to be easily removed

$4,630.00

Supply Uni Check Mate, 10:1, Ram, 200L, Single EPDM Wiper

GG GDG959

DURA-FLO SUPPLY UNIT, 10:1, 3.0 RAM, 200L

Supply Unit, Dura-Flo, 10:1, 3 in. Ram, 200L, Single EPDM Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materialsFor large drums up to 200 liter (55 gal)Graco D200 - For high-volume in-plant applicationsIndustry-first controls give you immediate and important information at the touch of a buttonQuick placement of drumPlaten wipers can be replaced in secondsPump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ramHigh-quality, durable parts reduce maintenance time, maximize uptime

$32,290.00

Gun, P2, Automatic

GG GCP4R1

P2 GUN, AUTOMATIC

Probler P2 Automatic Gun with 01 Mix Chamber Kit

The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.

For high output spray polyurethane foam and polyurea applications.Easy daily maintenanceResponsive trigger actionEasy-to-replace mix chamber insertAnti-crossover design virtually eliminates possibility of material entering the air pistonErgonomic handle and balanced design

$6,930.00

Tip, Spray, Airless

GG GG0627

Tip, Spray, Airless

$198.00

Tip, Spray

GG GG0613

Tip, Spray

$198.00

AA Tip

GG GG3411

TIP, SPRAY,AA4500

Graco GG3411 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.279 mm Orifice, 200-250 mm Fan Width

$333.00

Tip

GG GG3413

TIP, SPRAY,AA4500

Graco GG3413 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.330 mm Orifice, 200-250 mm Fan Width

Bleed Type: Non-Bleeder

Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne

$333.00

AA Tip

GG GG3415

TIP, SPRAY,AA4500

Graco GG3415 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.381 mm Orifice, 200-250 mm Fan Width

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

$333.00

Tip

GG GG3513

TIP, SPRAY,AA4500

Graco GG3513 10-12 in (250 mm) Fan Width, .013 in (.330 mm) Orifice Size Spray Tip for Pro Xs4 AA Spray Gun

$360.00

Spray Tip, AA4500

GG GG3519

Spray Tip, AA4500

$0.00

Spray Tip, .013 Orifice

GG GG3613

Spray Tip, .013 Orifice

$347.00

AA Tip

GG GG4313

AA Tip

$222.00

AA Tip

GG GG4311

AA Tip

$240.00

AA Tip

GG GG4409

AA Tip

$226.50

AA Tip

GG GG4411

TIP, SPRAY

Graco GG4411 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width

$217.50

High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width

GG GG4413

TIP, SPRAY

Graco GG4413 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width

Bleed Type: Non-Bleeder

Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solventborne, Waterborne

$217.50

High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width

GG GG4415

TIP, SPRAY

Graco GG4415 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width

$217.50

AA Tip

GG GG4421

AA Tip

$240.00

AA Tip

GG GG4515

TIP, SPRAY

Graco GG4515 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

$217.50

AA Tip

GG GG4513

TIP, SPRAY

Graco GG4513 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

$217.50

AA Tip

GG GG4517

TIP, SPRAY

Graco GG4517 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

$217.50

AA Tip

GG GG4611

AA Tip

$240.00

AA Tip

GG GG4613

AA Tip

$217.50

Fitting, Pipe, Nipple, Hex, 3/8X3/8Npt

GG 8462-17

Fitting, Pipe, Nipple, Hex, 3/8X3/8Npt

$145.00

Cover, Spray Hose Cover, 1000 Ft

GG 865696

Cover, Spray Hose Cover, 1000 Ft

$86.75

Monark Transfer Pump, 5:1

GG 902147

MONARK TRANSFER PUMP, 5:1

Graco 902147 5:1 Ratio Stainless Steel Monark Pump

Designed for high production applications, Monark pumps provide uniform and easily controlled delivery with its reliable Monark air motor.

Application: Positive displacement, 2-ball piston design. Typical Fluids handled include solvent-borne and water-borne fluids, high solids, plural component coatings, resins, stains, lacquers, varnishes, cleaning fluids, acid-catalyzed materials and high-solid coatings.

Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
Fluid return stanchion for circulation back to the pump
Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids

Model: Monark

Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

Fluid Outlet Size (in): 1/2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Material: Stainless Steel

Maximum Air Consumption (SCFM): 8.2
Maximum Air Inlet Pressure (bar): 8.2
Maximum Air Inlet Pressure (kPa): 827
Maximum Air Inlet Pressure (psi): 120

Maximum Flow Rate (GPM): 2.5
Maximum Flow Rate (L/min): 9.5

Maximum Working Pressure (bar): 41
Maximum Working Pressure (kPa): 4100
Maximum Working Pressure (MPa): 4.1
Maximum Working Pressure (psi): 600

Portable: Non-Portable

Power Type: Pneumatic

Pump Ratio: 5:1

$5,170.00

Cylinder Pump

GG 902980

Cylinder Pump

$4,560.00

Regulator Back Pressure

GG 903508

REGULATOR BACK PRESSURE

Graco 903508 Back Pressure Regulator, Low Pressure Corrosion Resistant, 15 GPM (56.7 lpm), 180 Max psi, Manual, 3/8 (m) x 3/8 (f), with Gauge

Back pressure regulators use closed loop control to maintain the pressure of the system regardless of flow demand

Stainless steel wetted materials are compatible with catalyst and waterborne materials
Hardened stainless steel seat ensure low wear and long life
PTFE/Elastomer hybrid diaphragm withstands wear while maintaining accurate responsiveness
Air operated models available for automated control, Conversion kit (15J498)

Compatible Material: Catalyst, Waterborne

Gauge Port Size (cm): 0.635
Gauge Port Size (in): 1/4
Gauge Port Size (mm): 6.35

Gauge Port Type: NPT

Includes: Gauge
Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525

Inlet Thread Type: NPT

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Regulated Pressure (bar): 14
Maximum Regulated Pressure (kPa): 1400
Maximum Regulated Pressure (psi): 200

Maximum Viscosity (cP): 1000

Maximum Working Pressure (bar): 21
Maximum Working Pressure (kPa): 2100
Maximum Working Pressure (psi): 300

Minimum Regulated Pressure (bar): 0.35
Minimum Regulated Pressure (kPa): 35
Minimum Regulated Pressure (MPa): 0.035
Minimum Regulated Pressure (psi): 5

Outlet Size (cm): 0.9525
Outlet Size (in): 3/8
Outlet Size (mm): 9.525
Outlet Thread Type: NPT

$2,250.00

D/S Regulator, 3/4In, Cs, 1000-4500 psi

GG 903958

REGULATOR, MASTIC

Spring Operated Mastic Fluid Pressure RegulatorThe mastic regulator is ideal for low to high viscosity sealants or adhesivesThese regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

$2,550.00

Ball, Seat

GG 904029

BALL, SEAT

Ball Kit for High Pressure Mastic RegulatorsUse this kit to replace the Ball of Graco Fluid Pressure Regulators

$160.50

Kit, Packing Ptfe (207550)

GG 904427

Kit, Packing Ptfe (207550)

$1,470.00

Filter, Bag

GG 915515

Filter, Bag

$1,645.00

Seat

GG 904030

SEAT, REGULATOR

Regulator Seat Kit for High Pressure Mastic RegulatorsUse this kit to replace the Seat of Graco Fluid Pressure Regulators

$359.00

Filter, Bag, SST, 15 GPM, 300 PSI

GG 915516

FILTER, BAG

Model 6 Bag Filter Housing, SST, 15 gpm (56.7 lpm), 300 psi (20.7 bar)

Model 6 bag filters can process large volumes of industrial paints and other industrial fluids. Standard filter assembly includes housing, cover, cover o-ring and unlined stainless steel basket. Order filters bags separately.

Model 6 bag filters for high flow capacity

$1,950.00

Valve

GG 907438

VALVE, TRIGGER

Graco 907438 Stainless Steel Color Change Valve

Application: For color changing or distribution of industrial paints and coatings or fluids.

Stainless Steel Color Change Valve -
100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure
300 psi (2.1 MPa, 21 bar) Maximum Fluid Working Pressure

$1,200.00

Bag Filter Housing, Model 12, CS, 30 GPM, 500 PSI

GG 915518

FILTER, BAG

Model 12 Bag Filter Housing, CS, 30 gpm (113.4 lpm), 500 psi (21 bar)

Model 12 bag filters can process large volumes of industrial paints and other industrial fluids. Standard filter assembly includes housing, cover, cover o-ring and unlined stainless steel basket. Order filters bags separately.

Model 12 bag filters for high flow capacity

$2,710.00

Kit, Repair, (Mini-5)

GG 918424

Kit, Repair, (Mini-5)

$365.00

Kit, Repair, Regulator, Mastic

GG 918448

KIT, REPAIR, REGULATOR, MASTIC

Graco 918448 Repair Kit for Ambient Mastic Regulators

KIT INCLUDES: PACKING, ORING [QTY. 2], RING, RETAINING [QTY. 1], WASHER [QTY. 1], SEAL, POLY PAC [QTY. 1]

$177.50

Kit, Repair

GG 918540

Kit, Repair

$0.00

Filter

GG 916366

Filter

$0.00

Automatic Dispense Gun

GG 918483

Automatic Dispense Gun

$6,950.00

Kit, Repair, 5.5", Ram

GG 918110

KIT, REPAIR,5.5" ,RAM

Graco 918110 Ram Repair Kit- 4 Pack

KIT INCLUDES: WIPER, ROD, 1.5 in. [QTY. 4 ], PACKING, O-RING [QTY. 4 ], PACKING, O-RING [QTY. 4 ], O-RING [QTY. 4 ], GUIDE, BAND [QTY. 4 ], PACKING, O-RING [QTY. 4 ], RING, RETAINING, EXTERNAL, 1.500 [QTY. 8 ], RING, SNAP, INTERNAL, 1.875 [QTY. 4 ], O-RING [QTY. 4 ], RING, SPIROLOX [QTY. 4 ]

$527.00

Filter, Assembly

GG 915921

Filter, Assembly

$121.50

Housing, Diaphragm

GG 915587

HOUSING, DIAPHRAGM

$1,610.00

Fitting, Elbow, STR, 1/8NPT, 90DEG, BRS

GG 94/0527/96

Fitting, Elbow, STR, 1/8NPT, 90DEG, BRS

$9.00

Kit, Repair, 6.5in Ram

GG 918432

Kit, Repair, 6.5in Ram

KIT INCLUDES: RING, SNAP, INTERNAL, 1.875 [QTY. 2], WIPER, ROD, 1.5 in. [QTY. 2], RING, RETAINING [QTY. 2], PACKING, O-RING [QTY. 4 ], PACKING, QUAD RING [QTY. 2], RING, RETAINING, EXTERNAL, 1.500 [QTY. 4 ], PACKING, O-RING [QTY. 2], BAND, GUIDE [QTY. 2], LUBRICANT, TUBE, 1 OZ [QTY. 1]

$658.00