GRACO INC. S10595

GG AEM511

TIP,MANUAL,ES

Graco AEM511 AEM Fine Finish Spray Tips, 0.011 inch (0.279 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

GG AEM513

TIP,MANUAL,ES

Graco AEM513 AEM Fine Finish Spray Tips, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

GG AEM515

TIP,MANUAL,ES

Graco AEM515 AEM Fine Finish Spray Tips, 0.015 inch (0.381 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

GG AEM517

TIP,MANUAL,ES

Graco AEM517 AEM Fine Finish Spray Tips, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width

• Coating Type: Abrasive, Metallic, High Conductivity, High Wear

• Compatible Paint Type: Automotive, Base Coat, Clear Coat, Enamels, High Solids, Metallics, Plural Component Materials, Primers, Solventborne, Urethanes

GG AEM519

GG AEM521

GG AEM523

GG AEM611

TIP, MANUAL, ES

GG AEM613

TIP,MANUAL,ES

Graco AEM613 AEM Fine Finish Spray Tips, 0.013 inch (0.330 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width

• Coating Type: Standard

• Compatible Paint Type: Epoxy, High Solids, Lacquers, Plural Component Materials, Polyurethanes, Solventborne, Urethanes, UV Curing, Varnishes,

GG AEM617

GG AEM615

GG AEM711

GG AF2020

GG AF2929

GG AF2942

GG AF4242

GG AHH144

REACTOR 2 H-40 SYSTEM, 230V, 20KW, ELITE, AP

Graco AHH144 Reactor 2 H-40 Elite Proportioner Package, Fusion AP Gun, (6) Heated Hoses with Xtreme-Wrap, 20 kW, 230 V, 3PH

Gracos hydraulic Reactor H-40 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:
  

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips
  

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 model

• Advanced control technology
  

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector
  

  Protects your electronics against excessive power spikes

• Three-year warranty
  

  Covers user display and control modules

  One of the best in the industry

• Model: Reactor 2
• Series: H-40
• Product Series: Elite

• Amperage (A): 95
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15.2, 3

• Hose Package: Multi-Hose
• Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 20.41
• Maximum Flow Rate (lb/min): 45

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8
• Overall Height (in): 63.3
• Overall Height (mm): 1608
• Overall Width (cm): 83.7
• Overall Width (in): 32.96
• Overall Width (mm): 837

• Phase: 3

• Power Rating (HP): 26.82
• Power Rating (kW): 20
• Power Rating (W): 20000
• Power Source: Hydraulic

• Pressure Type: High Pressure
• Product Type: Plural Component

GG AM-500-02

GG AP2010

REACTOR 2 E-30 SYSTEM, 10KW, AP

Graco AP2010 Reactor 2 E-30 Proportioner Package, Fusion AP Gun, Heated Hose with Xtreme-Wrap, 10 kW, 230/400 V

Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly. Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.

• Reactor 2 E-30 gives you:

  Compact footprint - more room in your spray rig

  Ergonomic design - easier to service

  Advanced control modules

  Better spraying performance compared to traditional electric Reactor systems

  Troubleshooting made quick and easy with QR codes

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Easy to reach, conveniently-placed electronics
• Advanced control modules

  Handles power fluctuations

• Sacrificial surge protector

  Protects your electronics against excessive power spikes

• Smooth, consistent spray performance - similar to hydraulic systems
• Three-year warranty

  Covers user display module, control modules and electric motor

  One of the best in the industry

• Model: Reactor 2
• Series: E-30
• Product Series: Non-Elite

• Amperage (A): 34 @ 350 to 415 V ac (3-Phase WYE), 50 @ 200 to 240 V ac (3-Phase Delta), 78 @ 200 to 240 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component A Inlet Size (in): 1/2
• Component A Inlet Size (mm): 12.7
• Component A Thread Type: JIC
• Component B Inlet Size (mm): #10
• Component B Outlet Size (in): 5/8
• Component B Outlet Size (mm): 15.875
• Component B Thread Type: JIC
• Component Type: Two Component

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 13.61
• Maximum Flow Rate (lb/min): 30

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature (

GG AP2012

REACTOR 2 E-XP2 SYSTEM, AP

Graco AP2012 Reactor 2 E-XP2 Proportioner, Fusion AP Gun, Heated Hose with Xtreme-Wrap, 230/400 V

Count on the Reactor 2 E-XP2 proportioner for advanced technology in applying fast-curing polyurea coatings. Because its a Reactor 2 series proportioner, it offers software and hardware enhancements for better spray performance, plus technologies that add to your bottom line. The Reactor 2 E-XP2 is engineered to process and spray polyurea and other coatings that require high pressures. The hybrid heater and heated hose condition the materials to the right viscosity prior to mixing. Quick knockdown lower pump for easy maintenance, easy-to-use controls, and rugged design make the Reactor the preferred choice for coatings applications.

• Reactor 2 E-XP2 gives you:

  Compact footprint - more room in your spray rig

  Ergonomic design - easier to service

  Advanced control modules

  Better spraying performance compared to traditional electric Reactor systems

  Troubleshooting made quick and easy with QR codes

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Advanced control modules

  Handles power fluctuations

• Sacrificial surge protector

  Protects your electronics against excessive power spikes

• Smooth, consistent spray performance - similar to hydraulic systems
• Three-year warranty

  Covers user display module, control modules and electric motor

  One of the best in the industry

• Model: Reactor 2
• Series: E-XP2
• Product Series: Non-Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 62 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component A Inlet Size (in): 1/2
• Component A Inlet Size (mm): 12.7
• Component A Thread Type: JIC
• Component B Inlet Size (mm): #10
• Component B Outlet Size (in): 5/8
• Component B Outlet Size (mm): 15.875
• Component B Thread Type: JIC
• Component Type: Two Component

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Heated Hose
• Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose

• Material Application: P

GG AP2614

REACTOR A-25 SYSTEM, FUSION AP

Graco AP2614 Reactor A25 Proportioner Package, Fusion AP Gun, Wheels, DataTrak, 230/400 V

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when youre spraying at maximum flow rates - resulting in better quality foam.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• DataTrak Control

  Resettable counter tracks material usage

• Three Heat Zones

  Three independent heat zones - ISO, resin and hose heat

  Provide accurate heat control for reliable spraying to handle different chemical viscosities

  Digital temperature controls

• Recirculation Manifold

  A quick, easy way to balance system pressures

• NXT Air Motor

  Low air consumption for increased efficiency

  Muffler provides low operating noise levels

  Air valve provides smooth and rapid changeover

• Quick Knockdown Lower Pumps

  For easy disassembly and maintenance

• ISO Pump Lube System

  Prevents isocyanate crystallization on the pump seal and shaft

• ISO Pump Lube System

  Prevents isocyanate crystallization on the pump seal and shaft

• Model: Reactor
• Series: A-25

• Air Inlet Size (cm): 1.27
• Air Inlet Size (in): 1/2
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component A Inlet Size (in): 3/4
• Component A Inlet Size (mm): 19.05
• Component A Thread Gender: Female
• Component A Thread Type: NPT
• Component B Inlet Size (in): 3/4
• Component B Inlet Size (mm): 19.05
• Component B Thread Gender: Female
• Component B Thread Type: NPT
• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Includes: Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak

• Material Application: Polyurethane Foam

• Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (kg/min): 11.4
• Maximum Flow Rate (lb/min): 25

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Mix Ratio: 1:1

• Minimum Fluid Viscosity (cP): 250

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall

GG AP9570

REACTOR E-10 SYSTEM, CMPLT, 120V, 2X15A, HTD

Graco AP9570 Reactor E-10 Proportioner Package, Fusion AP Gun, 120 V, 1PH

Gracos Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

• Small size
  

  Ideal for on-site portability and hard-to-reach areas

• Cost Savings
  

  One-person operation saves time and money

• Extent your spray business
  

  Use as an add-on to your existing spray business

• Material savings
  

  Saves 30% on material costs compared to disposable foam systems

• Electric power
  

  Low draw and plugs into standard outlets

• Single Knob Operation
  

  Intuitive start, stop and digital temperature display with single knob operation

• Easily balancing
  

  Pressure balance valves give you quick and easy balancing of system pressures

  Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern

• Easy-to-service fluid section
  

  Reduces maintenance and increases productivity

• Electric motor
  

  Improves performance and reduces operating costs

• Spray on-ratio
  

  Self-contained translucent material tanks show you that you are spraying on-ratio

• Pre-heat material
  

  Heaters and hose give you up to 2000 watts to pre-heat circulating material

• Model: Reactor
• Series: E-10

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: Quick-Disconnect Pin

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 15
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Hose Package: Includes Hose
• Includes: Proportioner, Fusion AP Gun, Unheated Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 5.44
• Maximum Flow Rate (lb/min): 12

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 140
• Maximum Working Pressure (kPa): 1400
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall Depth (mm): 762

• Overall Height (cm): 111.8
• Overall Height (in): 44
• Overall Height (mm): 1118
• Overall Wi

GG APH031

REACTOR 2 H-30 SYSTEM, 10KW, AP

Graco APH031 Reactor 2 H-30 Proportioner Package, Fusion AP Gun, Heated Hose with Xtreme-Wrap, 10 kW, 230/400 V

Gracos hydraulic Reactor H-30 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector

  Protects your electronics against excessive power spikes

• Three-year warranty

  Covers user display and control modules

  One of the best in the industry

• Model: Reactor 2
• Series: H-30
• Product Series: Non-Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 46 @ 200 to 240 V ac (3-Phase Delta), 79 @ 200 to 240 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 12.7
• Maximum Flow Rate (lb/min): 28

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8
• Overall Height (in): 63.3
• Overall Height (mm): 1608
• Overall Width (cm): 83.7
• Overall Width (in): 32.96
• Overall Width (mm): 837

• Phase: 1, 3

• Power Rating (HP): 13.41
• Power Rating (kW): 10
• Power Rating (W): 10000
• Power Source: Hydraulic

• Pressur

GG APH062

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, AP

Graco APH062 Reactor 2 H-XP2 Proportioner Package, Fusion AP Gun, Heated Hose, 15 kW, 230/400V

Gracos hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:
  

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips
  

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology
  

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector
  

  Protects your electronics against excessive power spikes

• Three-year warranty
  

  Covers user display and control modules

  One of the best in the industry

• Model: Reactor 2
• Series: H-XP2
• Product Series: Non-Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Fusion AP Gun, Heated Hose, Whip Hose

• Material Application: Polyurea

• Maximum Flow Rate (cc/min): 5680

• Maximum Flow Rate (GPM): 2
• Maximum Flow Rate (L/min): 5.7

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8
• Overall Height (in): 63.3
• Overall Height (mm): 1608
• Overall Width (cm): 83.7
• Overall Width (in): 32.96
• Overall Width (mm): 837

• Phase: 1, 3

• Power

GG APH162

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, AP

Graco APH162 Reactor 2 H-XP2 Elite Proportioner Package, Fusion AP Gun, Heated Hose, 15 kW, 230/400V

Gracos hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:
  

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips
  

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology
  

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector
  

  Protects your electronics against excessive power spikes

• Three-year warranty
  

  Covers user display and control modules

  One of the best in the industry

• Elite Models

  Graco InSite included

  Inlet pressure and temperature sensors (interfaces with Graco InSite)

  Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

• Model: Reactor 2
• Series: H-XP2
• Product Series: Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Fusion AP Gun, Heated Hose with Xtreme-Wrap, Heated Hose, Elite Kit

• Material Application: Polyurea

• Maximum Flow Rate (cc/min): 5680

• Maximum Flow Rate (GPM): 2
• Maximum Flow Rate (L/min): 5.7

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8

GG APT100

REACTOR E-10HP SYSTEM, CMPLT, 120V

Graco APT100 Reactor E-10 HP Proportioner Package, Fusion AP Gun, 120 V

The Reactor E-10hp is an ideal entry-level system and is great for coating projects such as balconies, pools, waterproofing and bedliner applications. Its a smart, affordable investment that will help your business grow

• Digital heat controls

  Allows you to enter the exact temperatures you need

  Uses the same circuit boards as a standard Reactor

• Single knob motor operation

  Intuitive, easy to use

• Insulated tanks

  Double-wall insulated to retain heat

  Smooth interior lining for easy cleaning

  Improved seal design on lid for better moisture control

• Boost heat

  Directs unused power from the motor circuit to additional heater rods

  Additional heater power brings material to desired temperatures faster during recirculation mode

• Robust hybrid heater

  More power, faster material heating means more uptime

• Motor

  Offers 50% more power than the Reactor E-10

  Provides improved spray performance with reduced pressure drop

• Quick knockdown lower pumps

  Easy disassembly and maintenance

• Temperature gauges in Y-strainers

  Provides accurate tank temperature readings

• Portable

  Fits through standard doorways

  Plugs into standard 120V or 230V outlets

  Rugged wheels for extreme jobsites

  No need for generator

• Wide tank opening

  Easy material loading and easy to clean

• Model: Reactor
• Series: E-10hp

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35

• Air Outlet Size (cm): 0.635
• Air Outlet Size (in): 1/4
• Air Outlet Size (mm): 6.35
• Air Outlet Thread Type: NPSM

• Amperage (A): 20
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion AP

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Proportioner, Fusion AP Gun, Unheated Hose

• Material Application: Polyurea

• Maximum Flow Rate (cc/min): 3790

• Maximum Flow Rate (GPM): 1
• Maximum Flow Rate (L/min): 3.79

• Maximum Fluid Temperature ( degree C): 77
• Maximum Fluid Temperature ( degree F): 170

• Maximum Fluid Temperature ( degree C): 77
• Maximum Fluid Temperature ( degree F): 170

• Maximum Mix Ratio: 1:1

• Maximum Spray Pressure (bar): 151.7

• Maximum Spray Pressure (kPa): 15170
• Maximum Spray Pressure (MPa): 15.2
• Maximum Spray Pressure (psi): 2200

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 21
• Maximum Working Pressure (psi): 3000

• Overall Depth (cm): 91.4
• Overall Depth (in): 36
• Overall Depth (mm): 914

• Overall Height (cm): 116.8
• Overall Height (in): 46

GG AR2929

GG AR4242

GG AR3729

GG AR47CX

GG AT200B09

GG AXF210

GG AXF208

GG AXF308

GG AXF410

GG AXF312

GG AXF416

GG AXF516

GG AXF612

GG AXF614

GG AXF714

GG AXF710

GG AXM211

GG AXF716

GG AXM319

GG AXF408

GG AXF508

GG AXF412

GG AXM313

GG AXF510

GG AXF512

GG AXM409

GG AXF212

GG AXM413

TIP,SPRAY, PERFORMAA

• Ball Check Size (in): 7/8
• Ball Material: Silicon Nitride

• Coating Type: Elite

GG AXM213

GG AXF518

GG AXM515

GG AXM513

GG AXM417

GG AXM421

GG AXM431

GG AXM311

GG AXF610

GG AXF306

GG AR5252

GG AXM613

GG AXM611

GG AXM621

GG AXF514

GG AXM617

GG AXM717

GG AXM519

GG AXM523

GG AXM725

GG AXM517

GG AXM817

GG AXM615

GG AXM821

GG AXP411

GG AXP515

GG AXP517

GG AXM713

GG AXP611

GG B-210-91

GG AXP519

GG AXP509

GG AXP421

GG B443K

GG B-210-16B

GG C00005

GG B443KA

GG C00011

GG AXM815

GG B15FA0

GG AXP513

GG C00044

GG C02015

GG AXP621

GG C00042

GG B3000006