GRACO INC. S10595

GG 25A869

GG 25A871

GG 25A872

GG 25B283

KIT, PROCONTROL 1KE PLUS

Graco 25B283 ProControl 1KE Plus Advanced Display Control Module (ADCM) with software and bracket only

This ProControl 1KE Plus package makes one component (1K) fluid management simple and cost-effective. Add component(s) to customize for specific finishing needs.

• Advanced Display Control Module (ADCM) gives operator instant feedback by showing comprehensive system parameters and material usage on an easy-to-read screen.
• Settings protected by Personal Identification Number (PIN) security lock or limit adjustable ranges, helping ensure consistency and optimal results from operator to operator, job to job.
• Fluid management package works with manual paint spray guns or automatic spray applicators.

• Model: ProControl
• Series: 1KE Plus

• Control Box Voltage (V dc): 15

• Flow Control Type: Fluid Control, Controller only

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 120

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Power Source: Order separate

GG 25B284

KIT,PROCONTROL 1KE PLUS

Graco 25B284 ProControl 1KE Plus Flow Monitor Only, Advanced Display Control Module, G3000 meter, software, short cable, no fluid panel

This ProControl 1KE Plus package provides an off-the-shelf solution to actively manage one component (1K) fluids, improve spray performance, and increase efficiency. Higher specification packages and upgrade kits are available for additional capabilities.

• Flow monitor tracks precisely how much material goes through fluid lines, so that you can improve finishing processes and reduce waste.
• Settings protected by Personal Identification Number (PIN) security lock or limit adjustable ranges, helping ensure consistency and optimal results from operator to operator, job to job.
• Fluid management package works with manual paint spray guns or automatic spray applicators.

• Model: ProControl
• Series: 1KE Plus

GG 25B493

GG 25E005

GG 25E139

GG 25E203

GG 25E268

GG 25P267

KIT, DIAPHRAGM-H1 PO

Graco 25P267 PTFE/EPDM Overmold Diaphragm Kit for 2- to 4-inch Pump

GG 25R076

KIT, DIAPHRAGM-L2 PT

GG 25R721

KIT, 3150HS FL, --, EO, EP

Graco 25R721 SaniForce 3150 HS Complete Fluid Repair Kit with FL Seat, EO Diaphragm, EP Seal

GG 25R728

KIT, 4150HS FL, --, EO, EP

Graco 25R728 SaniForce 4150 HS Complete Fluid Repair Kit with FL Seat, EO Diaphragm, EP Seal

GG 260124

GG 260277

GG 26C115

GG 276382

GG 512874

GG 514315

GG 514316

GG 514318

GG 556568

GG 557721

GG 557767

ROD, TIE, MXP, 4 SECTION

Graco 557767 Trabon MXP Divider Valve - 4 Section Tie Rod (3 Required)

• 4-Section Tie Rod
• Three required per assembly
• Lubriquip part number 527-300-280

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

GG 562813

MXP VALVE, TWIN 25T

Graco 562813 Trabon MXP Modular Divider Valve - MXP-25T - 0.025 in cu (0.41 cm cu )

The Trabon MXP Series offers the largest output available in a series progressive system. Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to provide positive assurance of a successful lube event.

• Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Robust design is virtually indestructible and built to perform in extreme environments

• Model: Trabon
• Series: MXP

• Application: Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.025

• Divider Valve Series: MXP

• Material: Carbon Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

GG 562885

GG 563313

GG 563961

KIT, B/O DISC 5000 BROWN

Graco 563961 Blowout Disc Kit - (25) Brown, 5000 psi, 3/8 in.

• Used in conjunction with system pressure switch - can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 5,000 psi - brown
• Lubriquip part number 560-900-140
• Trabon part number MV-617-35

• Color: Brown

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34450
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

• Number of Pieces: 25

• Overall Diameter (cm): 1
• Overall Diameter (in): 0.375

• Overall Diameter (mm): 10

GG 564019

GG 605752

GG 605754

GG 624858

GG 624689

GG 649023

GG 652064

HUSKY PUMP, 3300A-PA01AA1FKFKFKPT

Graco 652064 Husky 3300 (ANSI/DIN/NPT) Al Pump, AL Center Section, FKM Seats, FKM Balls & FKM Diaphragm

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

• Overall improved efficiency (up to 40% more efficient)
• Highest fluid flow rate in its class
• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
• Offered in ATEX configuration.
• Expanded material offering to handle numerous applications
• Flow rates up to 300 gpm (1,135 lpm)
• Modular stall-resistant air valve design
• Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
• Heavy-duty construction
• Faster change over with spring loaded pilot valves

• Model: Husky
• Series: 3300

• Air Exhaust Port Size (in): 1
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Fluoroelastomer

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Center Flange ANSI/DIN, Threaded

• Diaphragm Compatible Material: FKM
• Diaphragm Material: Fluoroelastomer

• Fluid Inlet Size (cm): 7.62
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.62
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Aluminum

• Maximum Air Consumption (SCFM): 335
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 103

• Maximum Flow Rate (GPM): 300
• Maximum Flow Rate (L/min): 1136

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 652890

HUSKY PUMP, 3300S, SP/SP/SP/A

Graco 652890 Husky 3300 (3 in. BSPT) SS Pump, AL Center Section, SP Seats, SP Balls & SP Diaphragm

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

• Overall improved efficiency (up to 40% more efficient)
• Highest fluid flow rate in its class
• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
• Offered in ATEX configuration.
• Expanded material offering to handle numerous applications
• Flow rates up to 300 gpm (1,135 lpm)
• Modular stall-resistant air valve design
• Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
• Heavy-duty construction
• Faster change over with spring loaded pilot valves

• Model: Husky
• Series: 3300

• Air Exhaust Port Size (in): 1
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.62
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.62
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 335
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 103

• Maximum Flow Rate (GPM): 300
• Maximum Flow Rate (L/min): 1136

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 652839

HUSKY PUMP, 3300S, SP/PT/PT/A

Graco 652839 Husky 3300 (3 in. NPT) SS Pump, AL Center Section, SP Seats, PTFE Balls & PTFE Diaphragm

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

• Overall improved efficiency (up to 40% more efficient)
• Highest fluid flow rate in its class
• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
• Offered in ATEX configuration.
• Expanded material offering to handle numerous applications
• Flow rates up to 300 gpm (1,135 lpm)
• Modular stall-resistant air valve design
• Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
• Heavy-duty construction
• Faster change over with spring loaded pilot valves

• Model: Husky
• Series: 3300

• Air Exhaust Port Size (in): 1
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/EPDM 2-Piece

• Fluid Inlet Size (cm): 7.62
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.62
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 335
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 103

• Maximum Flow Rate (GPM): 300
• Maximum Flow Rate (L/min): 1136

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 652903

HUSKY PUMP, 3300S, PP/PT/PT/A

Graco 652903 Husky 3300 (3 in. BSPT) SS Pump, AL Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 3300 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on the Husky pumps when compared to other diaphragm pumps.

• Overall improved efficiency (up to 40% more efficient)
• Highest fluid flow rate in its class
• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps
• Offered in ATEX configuration.
• Expanded material offering to handle numerous applications
• Flow rates up to 300 gpm (1,135 lpm)
• Modular stall-resistant air valve design
• Complete 3 inch family of diaphragm pumps available in aluminum or polypropylene center sections
• Heavy-duty construction
• Faster change over with spring loaded pilot valves

• Model: Husky
• Series: 3300

• Air Exhaust Port Size (in): 1
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/EPDM 2-Piece

• Fluid Inlet Size (cm): 7.62
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.62
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 335
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 103

• Maximum Flow Rate (GPM): 300
• Maximum Flow Rate (L/min): 1136

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 653526

HUSKY PUMP, 2200P, P1, SP/SP/SP/A

Graco 653526 Husky 2200 PP Pump, Center Flange, PP Center Section, SP Seats, SP Balls & SP Diaphragm

The Husky 2200 air-operated diaphragm pump features a single piece polypropylene center section for increased reliability and chemical compatibility, plus a patented, high-reliability modular air valve that is online serviceable. This diaphragm pump is designed with a reinforced frame for improved reliability and will help to eliminate fluid leakage.

• Overall improved air efficiency
• Highest fluid flow rate in its class
• Expanded material offering to handle endless applications
• 2 in (50.8 mm) ANSI center and end-porting options available
• High flow - 200 gpm (757 lpm) in a compact, portable size
• Fluid pressure to 125 psi (8.6 bar, 0.86 MPa)
• Lube-free operation
• Available in polypropylene and PVDF

• Model: Husky
• Series: 2200

• Air Exhaust Port Size (in): 1
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Windshield Washer Fluid, Diesel Exhaust Fluid, Cutting Oil, Water, Water - Wastewater Treatment, Water, Water - Wastewater Transfer

• Connection Type: Center Flange ANSI/DIN

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 5.08
• Fluid Inlet Size (in): 2
• Fluid Inlet Size (mm): 50.8

• Fluid Outlet Size (cm): 5.08
• Fluid Outlet Size (in): 2
• Fluid Outlet Size (mm): 50.8
• Fluid Section Material: Polypropylene

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Consumption (SCFM): 140
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 125

• Maximum Flow Rate (GPM): 200
• Maximum Flow Rate (L/min): 757

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Solid Size (cm): 0.9525
• Maximum Solid Size (in): 0.375
• Maximum Solid Size (mm): 9.525

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 902981

GG 903035

GG 965124

FIREBALL 425 PUMP, 10:1, STUBBY

Graco 965124 Fire-Ball 425 Series 10:1 400 lb (180 kg). Stubby Mount Air-Powered Grease Pump

The Fire-Ball 425 features a 4.25 inch (107.9 mm) air motor to supply the power you need for long pipe runs and higher-volume dispensing. An ideal choice for applications where multiple dispenses happen at the same time.

• Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.
• Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.
• Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated " dirty" air environments for long life without repair.
• Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

• Model: Fire-Ball
• Series: 425

• Air Inlet Size (in): 0.5
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Air Motor Effective Diameter (in): 4.25

• Application: Industrial

• Compatible Material: Grease

• Cycles Per Gallon: 20

• Fluid Inlet Type: Slotted

• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• For Use With: Grease

• Maximum Air Inlet Pressure (bar): 12.41
• Maximum Air Inlet Pressure (kPa): 1241
• Maximum Air Inlet Pressure (psi): 180

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Flow Rate (GPM): 3.5
• Maximum Flow Rate (L/min): 13.25

• Maximum Intermittent Cycle Rate (CPM): 60

• Maximum Working Pressure (bar): 124
• Maximum Working Pressure (kPa): 12400
• Maximum Working Pressure (MPa): 12.4
• Maximum Working Pressure (psi): 1800

• Power Type: Pneumatic

• Pump Ratio: 10:1

GG 96G545

G3 MAX PUMP, G-24M2-2L0L00-RMCD0A0VP

Graco 96G545 G3 Max Full-Featured Grease Lubrication Pump, 24 VDC, 2 liter reservoir with low level paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch

Extend machinery life, reduce operating costs and increase productivity! The G3 Max has a flexible design that works with injector-based or series progressive systems. The ultimate in flexibility - for a high value, custom fit on your application.

• LCD screen provides detailed view of pump status and operation. Alarm screens include troubleshooting tips and a QR code links to the G3 Education Center for Training-on-Demand. Bright LEDs with nearly 180 degree viewing angle allow users to confirm pump status from a distance.
• Low level indicator provides low alert and shut-down alarm
• Manual run initiates lubrication on-demand (remote option also available)
• Pre-lube function can initiate lube cycle on start-up
• One pump works with either a cycle switch or pressure sensor for custom installations and feedback. Cycle input is compatible with PNP, NPN, and dry contact switches, Pressure input is compatible with analog transducers/sensors and normally open switches.
• Machine count input - ideally suited for inconsistently used equipment
• DIN alarm relay connection can connect to a stack light to indicate pump status from a distance.
• Compatible with Normally Open Vent Valves - simplifies pump programming, with the added benefit of venting whenever the pump is not running.

• Model: G3
• Series: Max

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Display Type: LCD

• Fluid Outlet Thread Type: NPSF

• For Use With: Injector-Based Systems, Series Progressive Systems

• Includes: Wiper Arm, Low Level Paddle, DIN Form-A connectors for power input and alarm relay output, M12 connectors for vent valve, one pressure sensor (analog or digital), machine count and one cycle switch

• Maximum Flow Rate (ci/min): 0.25

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Voltage (V dc): 30

• Maximum Working Pressure (bar): 351.6
• Maximum Working Pressure (psi): 5100

• Minimum Voltage (V dc): 18

• Number of Pump Elements: Up to 3

• Power Type: Electric

GG D01021

GG D010A1

GG D03255

GG D03266

GG D03277

GG D03311

GG D03955

GG D03977

GG D05006

KIT, DIAPHRAGM-C1 SP

Graco D05006 Santoprene Diaphragm Kit for 1/2- & 3/4-inch Pumps

GG D05007

KIT, DIAPHRAGM-C1 BN

Graco D05007 Buna-N Diaphragm Kit for 1/2- & 3/4-inch Pumps

GG D05080

KIT, BALL-C1 FK

Graco D05080 1/2- & 3/4-inch FKM (Viton) Check Ball Kit

GG D05266

GG D05388

GG D07001

KIT, DIAPHRAGM-D1 PT

Graco D07001 PTFE Diaphragm Kit for 1-inch Pump

GG D07008

KIT, DIAPHRAGM-D1 FK

Graco D07008 FKM (Viton) Diaphragm Kit for 1-inch Pump

GG D07388

GG D0B001

KIT, DIAPHRAGM-F1 PT

Graco D0B001 PTFE Diaphragm Kit for 1.5-inch Pump

GG D0B005

KIT, DIAPHRAGM-F1 TP

Graco D0B005 TPE (Hytrel) Diaphragm Kit for 1.5-inch Pump

GG D0B341

GG D0B366

GG D0B400

KIT, SEAT 1590 IND SA

Graco D0B400 1.5-inch 17-4PH Stainless Steel Seat Kit

GG D0B666

GG D0B777

GG D0B955

GG 127356

GG 127671

GG 129302

GG 128322

GG 129308

GG 129703

GG 130883

GG 130994

GG 15D049

GG 15D936

GG 15F931

GG 15H512

GG 15H542

GG 15H592

GG 15H593

GG 15H594

GG 15H595

GG 15J565

GG 15J922

GG 15K419

GG 15K420

GG 15K442

GG 15K690

GG 15K815

GG 15K840

GG 15M320

GG 15M518

GG 15M520

GG 15M525

GG 15M654

GG 15U189

GG 15U592