GRACO INC. S10595

GG 562712

MSP VALVE, ASSY MSP 10S

The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!

GG 563148

SWIVEL, 90 1/8 PORT NITRILE

The Trabon Straight and Angle Swivels are available in standard ball bearing or compact types. Primarily designed for medium to high pressure service in centralized oil and grease systems, these swivels provide a simple and inexpensive means of making line connections between either stationary, or oscillating surfaces.

GG 563161

VALVE, RELIEF, 1/4 NPT, 3000 PSI

Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.

GG 563160

VALVE, RELIEF, 1/4 NPT, 2500 PSI

Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.

GG 563184

INDICATOR, RUPTURE, 1/4 NPTF, 2350 PSI

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563131

BLOCK, SPINDL-GARD, .0030

0.0030 in3 displacement

GG 563091

FILTER, ASSY LUBE

MSP Standard Inlet 10 micron Oil Filter, NPT

GG 563200

MHH VALVE, CHECK, 1/8 NPT, REV, 5000

GG 563198

VALVE, CHECK 1/8 250 PSI

Single Ball Check Valve

250 psi nominal cracking pressure

1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)

steel body/ball

5,000 psi max

GG 563207

VALVE, CHECK, 1/4 NPT, 35

Double Ball Check Valve

35 psi nominal cracking pressure

1/4 inch (6.4 mm) NPTF (M) x 1/4 inch (6.4 mm) NPSF (F)

steel body/ball

5,000 psi max

GG 563150

SWIVEL, 180 1/8 PORT NITRILE

180º Compact Swivel - 1/8 inch (3.2 mm)

GG 563096

FILTER, SPIN-ON 25 MICRON NPT

25 micron Spin-On Filter Assembly, NPT, External 150 psi (10.3 bar) Relief

GG 563167

GG 563213

SWIVEL, BALL 1/8 180

180º Straight Swivel - 1/8 inch (3.2 mm)

GG 562902

TUBE, RESV REPLACE 12LB PLSTC

Reservoir Repair Kits - Plastic tube with u-cup seal for part numbers 562892 and 562896

GG 563211

VALVE, CHECK REVERSE 1/4 35 PSI

Single Ball Check Valve

35 psi nominal cracking pressure

1/4 inch (6.4 mm) NPSF (F) x 1/4 inch (6.4 mm) NPTF (M)

steel body/ball

5,000 psi max

GG 562855

MSA-100 PUMP, ASSY

MSA Series products are used together with main lubrication supply lines where the pump is fed directly with no additional reservoir required. No reservoir makes the MSA Series ideal for locations that are difficult to reach or undesirable to enter. Use the MSA-100 when high operating pressures and larger outputs are required.

GG 563072

VALVE, RESTRICTOR VLV

Air Inlet Restrictor Valve

GG 563196

VALVE, CHECK, 1/8 NPT, 5000

Single Ball Check Valve

35 psi nominal cracking pressure

1/8 inch (3.2 mm) NPTF (M) x 1/8 inch (3.2 mm) NPSF (F)

steel body/ball

5,000 psi max

GG 562950

MODEL 25 PUMP, ASSY, .312, DIA

Provide lubrication to cylinder walls, bearings and other moving parts of equipment such as sugar mills, steam engines, presses and general machinery.

GG 563214

SWIVEL, BALL 1/4 90

90º Angle Swivel - 1/4 inch (6.4 mm)

GG 563215

SWIVEL, BALL 1/4 180

180º Straight Swivel - 1/4 inch (6.4 mm)

GG 563226

INDICATOR, RUPTURE PIN, 1/8 NPSF-ORB, 6400 PSI

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

GG 563212

SWIVEL, BALL 1/8 90

90º Angle Swivel - 1/8 inch (3.2 mm)

GG 563223

INDICATOR, RUPTURE PIN, 1/8 NPTF, 5500 PSI

Trabon Performance Indicators are pressure-sensitive devices that pinpoint excessive pressure in Trabon series progressive lubricating systems. These devices, which are installed in the alternate outlet ports of divider valves, signal a fault either by causing an indicator pin to protrude or by releasing lubricant to the atmosphere. All Performance Indicators respond quickly to protect the lube system and locate lube line blockage.

GG 563230

MHH VALVE, BALANCING, 1/8-27

GG 563235

INDICATOR, MAN RESET 1500 PS MJ/MSP

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563232

INDICATOR, MAN RESET 500 PS MJ/MSP

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563237

INDICATOR, MAN RESET 2500 PS MJ/MSP

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563234

INDICATOR, MAN RESET 1000 PS MJ/MSP

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563251

INDICATOR, CYCLE

The self-contained Visual Cycle Indicator is designed to allow for easy installation to Trabon MSP and Manzel MHH divider valves. The red indicator ring moves with the valve piston, allowing the user to visually determine the timing of each divider valve cycle.

GG 563258

INDICATOR, MANUAL RESET, O-RING, 2500 PSI

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563326

SWITCH, SW BLOWOUT HI PRESS P3

GG 563257

INDICATOR, MANUAL RESET, O-RING, 2000 PSI

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563319

RESERVOIR, TANK 12PT T1

GG 563316

KIT, ACCESSORY, L/L, 5/12 PT

15 amp Low Level Switch for 5 and 12 pt Cylindrical Oil Reservoirs, SPDT

GG 563261

INDICATOR, RESET 3000 PSI 1/8 NPSF

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563327

SWITCH, BLOWOUT HI PRESS P4

High Pressure Blowout Switch for all Rectangular Reservoirs

GG 563255

INDICATOR, MANUAL RESET, O-RING, 1000 PSI

Easy information on blocked lines, high system pressure or blocked bearings.

GG 563275

SPRA VALVE, SPRAY 4 IN DIA

Conserves air–air required only during spray interval

Versatile–can be used with any centralized lube system or mechanical oiler and will handle grease or oil

External mix nozzle purges itself and prevents clogging

Saves lubricant by spraying smaller amounts at frequent intervals, provides better film, with no waste

4 in. spray diameter, normal

GG 563304

MODU-FLO PUMP, ASSEMBLY, AL-5M

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

GG 563287

BLOCK, END MACH MX

GG 563308

MODU-FLO PUMP, ASSY, AL-50

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

GG 563315

VALVE, SOL ASSY 3-WAY

3-Way Pneumatic Solenoid Valve, 115 VAC

GG 563272

SWITCH, CYCLE, SPDT

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

Provides positive feedback based on actual metering piston movement

Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install

Able to be set for normally open or normally closed operation

GG 563306

MODU-FLO PUMP, ASSY AL-25

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

GG 563324

MANIFOLD, ASSY RESV TO PUMP

GG 563322

SWITCH, LL GRS RESV

Low Level Switch for 5, 6, 12 and 20 pt Cylindrical Grease Reservoirs

GG 563307

GG 563332

VALVE, SOL ASSY 24VDC

3-Way, 24 VDC Solenoid Valve

GG 563318

KIT, ACCESSORY, L/L, 12/24/40 PT

15 amp Low Level Switch for 6 pt Cylindrical Oil Reservoirs and all Tank Reservoirs, SPDT

GG 563358

E-SERIES PUMP, 1/4NPSF

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

GG 563273

SWITCH, SUBMERSIBLE, SPDT

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

Provides positive feedback based on actual metering piston movement

Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install

Able to be set for normally open or normally closed operation

GG 563360

E-SERIES PUMP, RESV ASSY GRS LL

Graco 563360 E-Series Pump and Reservoir Assembly - 5 lb (2.26 kg) Plastic Grease, 1/4 in. NPSF, Low Level Switch

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

• Easy field installation of accessories without disturbing existing plumbing
• Smart pump design with few moving parts ensures long-lasting dependability
• Lubriquip part number 521-300-360

• Model: E-Series

• Air Inlet Size (in): 0.2502
• Air Inlet Size (mm): 6.35

• Application: In-Plant Machinery

• Compatible Material: Grease

• Maximum Working Pressure (bar): 24
• Maximum Working Pressure (kPa): 2400
• Maximum Working Pressure (MPa): 2.4
• Maximum Working Pressure (psi): 350

• Power Type: Pneumatic

GG 563376

MAXI-FLO PUMP, 115 VAC REMOTE

Graco 563376 Maxi-Flo Electric Pump, 115 VAC, 4 pt. (1.89 liter) Plastic Rectangular Oil Reservoir, Remote Control

Compact design with everything you need to get your single line resistive oil lubrication system installed and running quickly. A standard package comes complete with reservoir, pump, gear motor, and choice of internal or remote control. Simple slide switches allow for easy setup of pump run cycle time. Bright LED indicators for low level and power allow for easy troubleshooting and verification.

• Integrated control with manual run button for easy setup
• Compact design fits anywhere
• 500 psi (34 bar) rating for using with various orifice metering devices

• Model: Maxi-Flo

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive

• Fluid Outlet Size (in): 0.125
• Fluid Outlet Size (mm): 3.1750
• Fluid Outlet Thread Type: NPSF

• Includes: 4 pt Plastic Rectangular Oil Reservoir, Remote Control

• Material: Plastic

• Maximum Flow Rate (ci/min): 0.12

• Maximum Fluid Output Pressure (bar): 34
• Maximum Fluid Output Pressure (psi): 500

• Maximum Fluid Output Pressure (bar): 34
• Maximum Fluid Output Pressure (psi): 500

• Maximum SUS Grade (SUS): 30000

• Maximum Working Pressure (bar): 34.5
• Maximum Working Pressure (kPa): 3450
• Maximum Working Pressure (MPa): 3.5
• Maximum Working Pressure (psi): 500

• Minimum SUS Grade (SUS): 60

• Overall Depth (cm): 16.4
• Overall Depth (in): 6.44
• Overall Depth (mm): 164

• Overall Height (cm): 24.1
• Overall Height (in): 9.5
• Overall Height (mm): 241

• Power Type: Electric

GG 563364

E-SERIES PUMP, RESV ASSY GRS LL

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

GG 563380

BODY, PUMP ASSY

GG 563383

CLUTCH, DRIVE

Clutch drive with ratchet arm

GG 563425

BLOCK, BASE, MSP/MHH, NPSF

GG 563424

BLOCK, END, MSP/MHH

GG 563469

KIT, CROSSPORT, MSP, RH, CS

GG 563470

KIT, CROSSPORT, MSP, LH, CS

GG 563471

KIT, CROSSPORT, MSP, LH/RH, CS

GG 563486

SWITCH, PROX MXP 3-PIN W/ IND

Graco 563486 Field Sensitive Mechanical Proximity Cycle, 20-32 VDC, 3-Pin - MXP, MX and MXO Divider Valves

Magnetically-operated sensing devices for sending system data to the controller or PLC.

• Available in 115 VAC or 12-32 VDC
• Available for all series progressive families to provide cycle rates up to 200 CPM
• Pressure ratings up to 10,000 psi (690 bar)
• Select models available with UL and CSA approvals
• Lubriquip part number 527-006-130

• Compatible Material: Oil, Grease

• Material: 303 Stainless Steel, Viton

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 52
• Maximum Working Pressure (psi): 7500

• Power Connection Type: 3-Pin BH Mini

GG 563507

FILTER, 138 MICRON INLINE 1/4 NPT

149 micron, 100 Mesh In-Line Block Strainer (NPT)

GG 563509

FILTER, 10 MICRON PLUG END

10 micron Replacement Filter Element for Graco part numbers 563511, 563513, 563516

GG 563511

FILTER, 10 MICRON INLINE 1/4 NPT

GG 563510

FILTER, 25 MICRON PLUG END

25 micron Replacement Filter Element for Graco part numbers 563512, 563514, 563515

GG 563512

FILTER, 25 MICRON INLINE 1/4 NPT

25 micron In-Line Oil Filter, NPT

GG 563518

BLOCK, SECT END ASSY MXP

GG 563579

LUBRISYSTEM PUMP, AIR (NO RES)

Easy to design, modify and adjust for oil or grease applications large or small. Great for operation of piston distributors. Rugged construction maximizes your productivity - upgrading to the internal timer control completely automates the system. All packages include internal pressure relief, so no need to install extra parts with additional costs. Combine with LubriSystem injectors for easy, low cost system design solutions.

Ability to serve large systems - up to 100 lube points or more

Efficient design promotes increased productivity and less downtime

No reservoir included

GG FK2213

KIT, 1590 FG SS, PT, PO, EP

GG FK2222

KIT, 1590 FG SS, SP, SP, EP

GG FFLP312

RAC X FFLP TIP, SPRAY, (312)

• Less mess with less overspray
• Put the paint where you want it

• Softer spray fan pattern
• Easy to apply any material to any surfance
• Consistent blended finish quality

• Spraying at half pressure doubles tip life
• Reduced sprayer maintenance – up to 2X life

• Exclusive internal tip geometry
• Reduces energy required to atomize paints, stains, and other materials
• Delivers a superior finish with less pressure
• Works with SmartControl on select Graco sprayers

• Works with any airless sprayer
• Longest lasting Fan pattern
• Highest quality finish with a consistent spray pattern

• Large raised tip size numbers are always legible – even when covered with paint

• Locking tab ensures tip stays securely in guard
• Snaps tip in spray or reverse position
• OneSeal tip gasket installs with no tools
• Solvent seal available when using extremely hot solvents

GG FPH132

REACTOR 2 H-30 SYSTEM, 15KW, ELITE, PC

Graco FPH132 Reactor 2 H-30 Elite Proportioner Package, Fusion PC Gun, Heated Hose with Xtreme-Wrap, 15 kW, 230/400 V

Gracos hydraulic Reactor H-30 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector

  Protects your electronics against excessive power spikes

• Three-year warranty

  Covers user display and control modules

  One of the best in the industry

• Model: Reactor 2
• Series: H-30
• Product Series: Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion PC

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Proportioner, Fusion PC Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors

• Material Application: Polyurethane Foam

• Maximum Flow Rate (kg/min): 12.7
• Maximum Flow Rate (lb/min): 28

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8
• Overall Height (in): 63.3
• Overall Height (mm): 1608
• Overall Width (cm): 83.7
• Overall Width (in): 32.96
• Overall Width (mm): 837

• Phase: 1, 3

• Power Rating (HP): 20.11
• Power Rating (kW): 15
• Power Rating (W): 15000
• Power Sour

GG FP2614

REACTOR A-25 SYSTEM, FUSION PC

Graco FP2614 Reactor A25 Proportioner Package, Fusion PC Gun, Wheels, DataTrak, 230/400 V

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when youre spraying at maximum flow rates - resulting in better quality foam.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• DataTrak Control

  Resettable counter tracks material usage

• Three Heat Zones

  Three independent heat zones - ISO, resin and hose heat

  Provide accurate heat control for reliable spraying to handle different chemical viscosities

  Digital temperature controls

• Recirculation Manifold

  A quick, easy way to balance system pressures

• NXT Air Motor

  Low air consumption for increased efficiency

  Muffler provides low operating noise levels

  Air valve provides smooth and rapid changeover

• Quick Knockdown Lower Pumps

  For easy disassembly and maintenance

• ISO Pump Lube System

  Prevents isocyanate crystallization on the pump seal and shaft

• ISO Pump Lube System

  Prevents isocyanate crystallization on the pump seal and shaft

• Model: Reactor
• Series: A-25

• Air Inlet Size (cm): 1.27
• Air Inlet Size (in): 1/2
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component A Inlet Size (in): 3/4
• Component A Inlet Size (mm): 19.05
• Component A Thread Gender: Female
• Component A Thread Type: NPT
• Component B Inlet Size (in): 3/4
• Component B Inlet Size (mm): 19.05
• Component B Thread Gender: Female
• Component B Thread Type: NPT
• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion PC

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Includes: Proportioner, Fusion PC Gun, Heated Hose, Wheels, DataTrak

• Material Application: Polyurethane Foam

• Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (kg/min): 11.4
• Maximum Flow Rate (lb/min): 25

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Mix Ratio: 1:1

• Minimum Fluid Viscosity (cP): 250

• Overall Depth (cm): 76.2
• Overall Depth (in): 30
• Overall

GG FD1111

SANIFORCE AODD PUMP, 1040FG-PS01AS13SSPTPTPT21

GG FTM979

GG FD3133

SANIFORCE AODD PUMP, 2150FG-PS01AS13SSCWPOPT21

GG FTM317

GG FFLP112

RAC X FFLP TIP, SPRAY, (112)

• Less mess with less overspray
• Put the paint where you want it

• Softer spray fan pattern
• Easy to apply any material to any surfance
• Consistent blended finish quality

• Spraying at half pressure doubles tip life
• Reduced sprayer maintenance – up to 2X life

• Exclusive internal tip geometry
• Reduces energy required to atomize paints, stains, and other materials
• Delivers a superior finish with less pressure
• Works with SmartControl on select Graco sprayers

• Works with any airless sprayer
• Longest lasting Fan pattern
• Highest quality finish with a consistent spray pattern

• Large raised tip size numbers are always legible – even when covered with paint

• Locking tab ensures tip stays securely in guard
• Snaps tip in spray or reverse position
• OneSeal tip gasket installs with no tools
• Solvent seal available when using extremely hot solvents

GG FK2111

KIT, 1590 FG, SS, PT, PT, PT

GG FT0438

GG FFLP516

RAC X FFLP TIP, SPRAY, (516)

• Less mess with less overspray
• Put the paint where you want it

• Softer spray fan pattern
• Easy to apply any material to any surfance
• Consistent blended finish quality

• Spraying at half pressure doubles tip life
• Reduced sprayer maintenance – up to 2X life

• Exclusive internal tip geometry
• Reduces energy required to atomize paints, stains, and other materials
• Delivers a superior finish with less pressure
• Works with SmartControl on select Graco sprayers

• Works with any airless sprayer
• Longest lasting Fan pattern
• Highest quality finish with a consistent spray pattern

• Large raised tip size numbers are always legible – even when covered with paint

• Locking tab ensures tip stays securely in guard
• Snaps tip in spray or reverse position
• OneSeal tip gasket installs with no tools
• Solvent seal available when using extremely hot solvents

GG G03C03

MERKUR SYSTEM, PUMP, 3:1, 125CC, CART, STD

GG FD3113

SANIFORCE AODD PUMP, 2150FG-PS01AS13SSPTPOPT21

GG FT0624

GG G03W01

MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD

GG FFLP514

RAC X FFLP TIP, SPRAY, (514)

• Less mess with less overspray
• Put the paint where you want it

• Softer spray fan pattern
• Easy to apply any material to any surfance
• Consistent blended finish quality

• Spraying at half pressure doubles tip life
• Reduced sprayer maintenance – up to 2X life

• Exclusive internal tip geometry
• Reduces energy required to atomize paints, stains, and other materials
• Delivers a superior finish with less pressure
• Works with SmartControl on select Graco sprayers

• Works with any airless sprayer
• Longest lasting Fan pattern
• Highest quality finish with a consistent spray pattern

• Large raised tip size numbers are always legible – even when covered with paint

• Locking tab ensures tip stays securely in guard
• Snaps tip in spray or reverse position
• OneSeal tip gasket installs with no tools
• Solvent seal available when using extremely hot solvents

GG G05B01

MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD

GG FAA080390

GG G10W01

MERKUR SYSTEM PUMP 10:01 75CC WA STD

Graco G10W01 10:1 Merkur Pump, 1.2 gpm (4.5 lpm) fluid flow, Wall Mount, Pump/Gun Air Controls

Designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

• Proven to outperform and outlast other pumps in their class
• Highest technology air motor on the market
• Low air consumption for increased efficiency

• Model: Merkur

• Compatible Material: Waterborne, Solvent borne, High Solids, Single Components, Topcoats, Varnish, Lacquer, Acid Catalysts, Enamel, UV Coating

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 0
• Gun Model: No Applicator
• Gun Technology: Bare Package
• Gun Type: No Applicator

• Hose Inlet Diameter (cm): 0.476
• Hose Inlet Diameter (in): 3/16
• Hose Inlet Diameter (mm): 4.76

• Includes: Pump and Gun Air Controls

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 1.2
• Maximum Flow Rate (L/min): 4.5

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (psi): 1000

• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: High Pressure
• Product Type: Bare Package

• Pump Ratio: 10:1
• Pump Type: Pneumatic Piston Pump

GG FPH062

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, PC

Graco FPH062 Reactor 2 H-XP2 Proportioner Package, Fusion PC Gun, Heated Hose, 15 kW, 230/400V

Gracos hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:
  

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips
  

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology
  

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector
  

  Protects your electronics against excessive power spikes

• Three-year warranty
  

  Covers user display and control modules

  One of the best in the industry

• Model: Reactor 2
• Series: H-XP2
• Product Series: Non-Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion PC

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Fusion PC Gun, Heated Hose, Whip Hose

• Material Application: Polyurea

• Maximum Flow Rate (cc/min): 5680

• Maximum Flow Rate (GPM): 2
• Maximum Flow Rate (L/min): 5.7

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8
• Overall Height (in): 63.3
• Overall Height (mm): 1608
• Overall Width (cm): 83.7
• Overall Width (in): 32.96
• Overall Width (mm): 837

• Phase: 1, 3

• Power

GG FPH162

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, PC

Graco FPH162 Reactor 2 H-XP2 Elite Proportioner Package, Fusion PC Gun, Heated Hose, 15 kW, 230/400V

Gracos hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:
  

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips
  

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology
  

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  Drum level indicators

• Sacrificial surge protector
  

  Protects your electronics against excessive power spikes

• Three-year warranty
  

  Covers user display and control modules

  One of the best in the industry

• Elite Models

  Graco InSite included

  Inlet pressure and temperature sensors (interfaces with Graco InSite)

  Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

• Model: Reactor 2
• Series: H-XP2
• Product Series: Elite

• Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
• Application: Protective Coatings
• Applicator Type: Manual

• Compatible Material: Plural Components

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: Fusion PC

• Hose Length (ft): 50, 10
• Hose Length (m): 15, 3

• Hose Package: Single Hose
• Includes: Fusion PC Gun, Heated Hose with Xtreme-Wrap, Heated Hose, Elite Kit

• Material Application: Polyurea

• Maximum Flow Rate (cc/min): 5680

• Maximum Flow Rate (GPM): 2
• Maximum Flow Rate (L/min): 5.7

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Overall Depth (cm): 53
• Overall Depth (in): 20.88
• Overall Depth (mm): 530

• Overall Height (cm): 160.8

GG FHH174

REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC

Graco FHH174 Reactor 2 H-XP3 Elite Proportioner Package, Fusion PC Gun, (6) Heated Hoses with Scuff Guard, 20 kW, 230 V, 3PH

Gracos hydraulic Reactor H-XP3 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  
  
  

  Drum level indicators

  • Sacrificial surge protector

    Protects your electronics against excessive power spikes

  • Three-year warranty

    Covers user display and control modules

    One of the best in the industry

  • Elite Models

    Graco InSite included

    Inlet pressure and temperature sensors (interfaces with Graco InSite)

    Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

  
  

  • Model: Reactor 2
  • Series: H-XP3
  • Product Series: Elite
  • Amperage (A): 95 @ 200 to 240 V ac (3-Phase Delta)
  • Application: Protective Coatings
  • Applicator Type: Manual
  • Compatible Material: Plural Components
  • Component Type: Two Component
  • Flush Type: Solvent
  • Frequency (Hz): 50/60
  • Gun Type: Fusion PC
  • Hose Length (ft): 50, 10
  • Hose Length (m): 15.2, 3
  • Hose Package: Multi-Hose
  • Includes: Proportioner, Fusion PC Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors
  • Material Application: Polyurea
  • Maximum Flow Rate (cc/min): 9080
  • Maximum Flow Rate (GPM): 2.4
  • Maximum Flow Rate (L/min): 9.08
  • Maximum Fluid Temperature ( degree C): 88
  • Maximum Fluid Temperature ( degree F): 190
  • Maximum Fluid Temperature ( degree C): 88
  • Maximum Fluid Temperature ( degree F): 190
  • Maximum Mix Ratio: 1:1
  • Overall Depth (cm): 53
  • Overall Depth (in): 20.88
  • Overall Depth (mm): 530
  • Overall Height (cm): 160.8
  • Overall Height (in): 63.3
  • Overall Height (mm): 1608
  • Overall Width (cm): 83.7
  • Overall Width (in): 32.96
  • Overall Width (mm): 837
  • Phase: 3
  • Power Rating (HP): 26.82
  • Power Rating (kW): 20
  • Power Rating (W): 20000

GG FPH174

REACTOR 2 H-XP3 SYSTEM, 230, 20KW, ELITE, PC

Graco FPH174 Reactor 2 H-XP3 Elite Proportioner Package, Fusion PC Gun, Heated Hose with Scuff Guard, 20 kW, 230 V, 3PH

Gracos hydraulic Reactor H-XP3 brings increased yield and high output spraying. Ideal for in-plant OEMs or applicators that spray at high volumes.

• What a hydraulic system can do for you:

  Dependability - robust, durable, longest life spray system

  Reduce downtime - allows for longer time in between required maintenance

  Increase daily productivity - capable of extremely high duty cycle

• Reactor Connect : Communication and Control at your Fingertips

  Control your Reactor using your phone

  Improve productivity and yield by optimizing spray parameters and never having to go back to your rig

  Monitor your rigs/crews using the multi-system dashboard

  Troubleshoot an issue quickly using real-time data

  Provide documentation to a customer

  Use reports to better manage your business

  Saves all your spray data to the cloud

  Utilize account management to better manage your equipment and crews

  Reactor Connect comes standard with all Reactor 2 models

• Advanced control technology

  Tracks, monitors and saves project data

  Data can be saved and downloaded onto a USB drive

  Stores up to 24 chemical recipes

  
  
  

  Drum level indicators

  • Sacrificial surge protector

    Protects your electronics against excessive power spikes

  • Three-year warranty

    Covers user display and control modules

    One of the best in the industry

  • Elite Models

    Graco InSite included

    Inlet pressure and temperature sensors (interfaces with Graco InSite)

    Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

  
  

  • Model: Reactor 2
  • Series: H-XP3
  • Product Series: Elite
  • Amperage (A): 95 @ 200 to 240 V ac (3-Phase Delta)
  • Application: Protective Coatings
  • Applicator Type: Manual
  • Compatible Material: Plural Components
  • Component Type: Two Component
  • Flush Type: Solvent
  • Frequency (Hz): 50/60
  • Gun Type: Fusion PC
  • Hose Length (ft): 50, 10
  • Hose Length (m): 15, 3
  • Hose Package: Single Hose
  • Includes: Proportioner, Fusion PC Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors
  • Material Application: Polyurea
  • Maximum Flow Rate (cc/min): 9080
  • Maximum Flow Rate (GPM): 2.4
  • Maximum Flow Rate (L/min): 9.08
  • Maximum Fluid Temperature ( degree C): 88
  • Maximum Fluid Temperature ( degree F): 190
  • Maximum Fluid Temperature ( degree C): 88
  • Maximum Fluid Temperature ( degree F): 190
  • Maximum Mix Ratio: 1:1
  • Maximum Working Pressure (bar): 241
  • Maximum Working Pressure (kPa): 24100
  • Maximum Working Pressure (MPa): 24.1
  • Maximum Working Pressure (psi): 3500
  • Overall Depth (cm): 53
  • Overall Depth (in): 20.88
  • Overall Depth (mm): 530
  • Overall Height (cm): 160.8
  • Overall Height (in): 63.3
  • Overall Height (mm): 1608
  • Overall Width (cm): 83.7
  • Overall Width (in):

GG FFLP412

RAC X FFLP TIP, SPRAY, (412)

• Less mess with less overspray
• Put the paint where you want it

• Softer spray fan pattern
• Easy to apply any material to any surfance
• Consistent blended finish quality

• Spraying at half pressure doubles tip life
• Reduced sprayer maintenance – up to 2X life

• Exclusive internal tip geometry
• Reduces energy required to atomize paints, stains, and other materials
• Delivers a superior finish with less pressure
• Works with SmartControl on select Graco sprayers

• Works with any airless sprayer
• Longest lasting Fan pattern
• Highest quality finish with a consistent spray pattern

• Large raised tip size numbers are always legible – even when covered with paint

• Locking tab ensures tip stays securely in guard
• Snaps tip in spray or reverse position
• OneSeal tip gasket installs with no tools
• Solvent seal available when using extremely hot solvents

GG G05B09

MERKUR BELLOWS SYSTEM, PUMP, 150CC, STD

GG G05B02

MERKUR BELLOWS SYSTEM, PUMP, 150CC, SMT

GG G03W15

MERKUR SYSTEM, PUMP, 3:1, 125CC, WALL, STD