GRACO INC. S10595

GG 234097

GG 234098

GG 234100

GG 234106

KIT, ACCY, REMOTE, G3000HR

GG 234118

KIT, REPAIR, TANK, SURGE

GG 234131

GG 234237

GUN, SPRAY, UNDERCOAT

Graco 234237 4-Finger Silver Gun with Tip Guard/Tip - 4,500 psi (310 bar) x 3/8 NPT(f) Inlet

• Up to 18,000 psi (1,242 bar)
• Must order 155570 adapter and 239663 straight swivel to accommodate gun to 1/4 in (mbe) hose.

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Body Material: Aluminum

• Compatible Material: Undercoating, Rustproofing
• Component A Inlet Size (cm): 0.635

• Component A Inlet Size (in): 1/4
• Component A Inlet Size (mm): 6.35
• Component A Inlet Thread Type: NPSM

• Fluid Orifice Size (cm): 0.043
• Fluid Orifice Size (in): 0.017
• Fluid Orifice Size (mm): 0.43

• For Use With: Undercoating and Rustproofing

• Gun Activation: Manual
• Gun Type: Airless Gun

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

GG 234255

GG 234257

REGULATOR, PRESS, P10-RP, NPT

GG 234259

REGULATOR, PRESS, P250-VP, NPT

Available with mechanical control or pneumatic control

Suitable for fluids with low and high viscosities

Models available with wetted parts made of stainless steel

Application-oriented pressure ranges

GG 234260

REGULATOR, PRESS, P100-VM, NPT

GG 234261

REGULATOR, PRESS, P20-RM DN1, NPT

GG 234263

REGULATOR, PRESS, P20-VM, NPT

GG 234265

REGULATOR, PRESS, P270-VM, NPT

GG 234266

REGULATOR, PRESSURE, NPT, P60-VP DN7

GG 234267

REGULATOR, PRESS, P50-VM, NPT

GG 234268

REGULATOR, PRESS, P100-RM, NPT

GG 234269

REGULATOR, PRESS, P200-RM, NPT

GG 234270

REGULATOR, PRESS, P150-VP DN7, NPT

GG CM2L59

CHECK-MATE SUPPLY UNIT, 68:1, 3.0 RAM, 200L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM2558

CHECK-MATE SUPPLY UNIT, 23:1, 3.0 RAM, 200L

Graco CM2558 23:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum

• Material Container Volume (gal): 52.8
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kg/cm 2): 10.55
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3.2
• Maximum Flow Rate (L/min): 12.1

• Maximum Fluid Pressure (bar): 158.8
• Maximum Fluid Pressure (kPa): 15880
• Maximum Fluid Pressure (psi): 2300

• Maximum Fluid Pressure (bar): 158.8
• Maximum Fluid Pressure (kPa): 15880
• Maximum Fluid Pressure (psi): 2300

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 161
• Maximum Working Pressure (kPa): 16100
• Maximum Working Pressure (MPa): 16.1
• Maximum Working Pressure (psi): 2300

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 23:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM2959

CHECK-MATE SUPPLY UNIT, 36:1, 3.0 RAM, 200L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM3A5A

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

Graco CM3A5A 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum

• Material Container Volume (gal): 52.8
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kg/cm 2): 10.55
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 4
• Maximum Flow Rate (L/min): 15.1

• Maximum Fluid Pressure (bar): 379.2
• Maximum Fluid Pressure (kPa): 37920
• Maximum Fluid Pressure (psi): 5500

• Maximum Fluid Pressure (bar): 379.2
• Maximum Fluid Pressure (kPa): 37920
• Maximum Fluid Pressure (psi): 5500

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 385
• Maximum Working Pressure (kPa): 38500
• Maximum Working Pressure (MPa): 38.5
• Maximum Working Pressure (psi): 5500

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 55:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM3958

CHECK-MATE SUPPLY UNIT,55:1,3.0 RAM,200L

Graco CM3958 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button Quick placement of drum
• Platen wipers can be replaced in seconds
• Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

GG CM3A58

CHECK-MATE SUPPLY UNIT,55:1,3.0 RAM,200L

• Model: Check-Mate

GG CM7A3C

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM3F59

CHECK-MATE SUPPLY UNIT, 55:1, 3.0 RAM, 200L

Graco CM3F59 55:1 Ratio 200 L 3.0 RAM Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum

• Material Container Volume (gal): 52.8
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kg/cm 2): 10.55
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 4
• Maximum Flow Rate (L/min): 15.1

• Maximum Fluid Pressure (bar): 379.2
• Maximum Fluid Pressure (kPa): 37920
• Maximum Fluid Pressure (psi): 5500

• Maximum Fluid Pressure (bar): 379.2
• Maximum Fluid Pressure (kPa): 37920
• Maximum Fluid Pressure (psi): 5500

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 385
• Maximum Working Pressure (kPa): 38500
• Maximum Working Pressure (MPa): 38.5
• Maximum Working Pressure (psi): 5500

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 55:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM6C3F

CHECK-MATE SUPPLY UNIT, 11:1, 0 VOLT, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM7A1B

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, L20C, 20L

Graco CM7A1B 20:1 Ratio 20 L L20C Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco L20c - A lightweight, elevator ram on a cart
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: L20c

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Pail
• Control Panel Material: N/A

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kg/cm 2): 7.03
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Height (cm): 175.26
• Maximum Height (ft): 5.75
• Maximum Height (in): 69
• Maximum Height (m): 1.75
• Maximum Height (mm): 1752.6

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Minimum Height (cm): 111.76
• Minimum Height (ft): 3.67
• Minimum Height (in): 44
• Minimum Height (m): 1.12
• Minimum Height (mm): 1117.6

• Overall Depth (cm): 53.34
• Overall Depth (in): 21
• Overall Depth (mm): 533.4

• Overall Width (cm): 55.88
• Overall Width (in): 22
• Overall Width (mm): 558.8

• Power Type: Pneumatic

• Pump Ratio: 20:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM7A2B

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

Graco CM7A2B 20:1 Ratio 20 L S20 Cart Mounted Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco S20c - Same as the S20, but includes a cart
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: S20c

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Pail

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Height (cm): 228.6
• Maximum Height (ft): 7.5
• Maximum Height (in): 90
• Maximum Height (m): 2.29
• Maximum Height (mm): 2286

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Minimum Height (cm): 165.1
• Minimum Height (ft): 5.42
• Minimum Height (in): 65
• Minimum Height (m): 1.65
• Minimum Height (mm): 1651

• Overall Depth (cm): 66.1
• Overall Depth (in): 26
• Overall Depth (mm): 661

• Overall Width (cm): 56.2
• Overall Width (in): 22.1
• Overall Width (mm): 562

• Power Type: Pneumatic

• Pump Ratio: 20:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM5959

CHECK-MATE SUPPLY UNIT, 26:1, 3.0 RAM, 200L

Graco CM5959 26:1 Ratio 200 L 3.0 RAM Supply Unit with EPDM Wiper Plate

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum

• Material Container Volume (gal): 52.8
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kg/cm 2): 10.55
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 7.8
• Maximum Flow Rate (L/min): 29.5

• Maximum Fluid Pressure (bar): 179.3
• Maximum Fluid Pressure (kPa): 17930
• Maximum Fluid Pressure (psi): 2600

• Maximum Fluid Pressure (bar): 179.3
• Maximum Fluid Pressure (kPa): 17930
• Maximum Fluid Pressure (psi): 2600

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 182
• Maximum Working Pressure (kPa): 18200
• Maximum Working Pressure (MPa): 18.2
• Maximum Working Pressure (psi): 2600

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 26:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM7A59

SPLYUNIT, 20: 1, D200, 200L

Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials

GG CM7A3B

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM5M78

GG CM7C2F

CHECK-MATE SUPPLY UNIT, 20:1, 0 V, S20 CART, 20L

Graco CM7C2F Supply Unit, Check-Mate, 20:1, S/S, Severe Duty, 3 in. S20c Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco S20c - Same as the S20, but includes a cart
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: S20c

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Pail

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Height (cm): 228.6
• Maximum Height (ft): 7.5
• Maximum Height (in): 90
• Maximum Height (m): 2.29
• Maximum Height (mm): 2286

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Minimum Height (cm): 165.1
• Minimum Height (ft): 5.42
• Minimum Height (in): 65
• Minimum Height (m): 1.65
• Minimum Height (mm): 1651

• Overall Depth (cm): 66.1
• Overall Depth (in): 26
• Overall Depth (mm): 661

• Overall Width (cm): 56.2
• Overall Width (in): 22.1
• Overall Width (mm): 562

• Power Type: Pneumatic

• Pump Ratio: 20:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM7C3F

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM7C5A

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

Graco CM7C5A Supply Unit, Check-Mate, 20:1, S/S, Severe Duty, 3 in. D200 Ram, Integrated Air Controls, 200L Al Platen, Double O-Ring Neoprene Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum
• Control Panel Material: N/A

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Pressure (bar): 137.9
• Maximum Fluid Pressure (kPa): 13790
• Maximum Fluid Pressure (psi): 2000

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 20:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM7C58

CHECK-MATE SUPPLY UNIT, 20:1, 0 VOLT, D200, 200L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM7F1F

GG CM8B5A

CHECK-MATE SUPPLY UNIT, 38:1, 0 VOLT, D200, 200L

Graco CM8B5A 38:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum
• Control Panel Material: N/A

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 262
• Maximum Fluid Pressure (kPa): 26200
• Maximum Fluid Pressure (psi): 3800

• Maximum Fluid Pressure (bar): 262
• Maximum Fluid Pressure (kPa): 26200
• Maximum Fluid Pressure (psi): 3800

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 262
• Maximum Working Pressure (kPa): 26200
• Maximum Working Pressure (MPa): 26.2
• Maximum Working Pressure (psi): 3800

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 38:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM8C2F

CHECK-MATE SUPPLY UNIT, 38:1, 0 V, S20 CART, 20L

Graco CM8C2F Supply Unit, Check-Mate, 38:1, S/S, Severe Duty, 3 in. S20c Ram, Integrated Air Controls, 20L S/S Flat Platen, Single PTFE Wiper

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco S20c - Same as the S20, but includes a cart
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: S20c

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Pail

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 262
• Maximum Fluid Pressure (kPa): 26200
• Maximum Fluid Pressure (psi): 3800

• Maximum Fluid Pressure (bar): 262
• Maximum Fluid Pressure (kPa): 26200
• Maximum Fluid Pressure (psi): 3800

• Maximum Height (cm): 228.6
• Maximum Height (ft): 7.5
• Maximum Height (in): 90
• Maximum Height (m): 2.29
• Maximum Height (mm): 2286

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 262
• Maximum Working Pressure (kPa): 26200
• Maximum Working Pressure (MPa): 26.2
• Maximum Working Pressure (psi): 3800

• Minimum Height (cm): 165.1
• Minimum Height (ft): 5.42
• Minimum Height (in): 65
• Minimum Height (m): 1.65
• Minimum Height (mm): 1651

• Overall Depth (cm): 66.1
• Overall Depth (in): 26
• Overall Depth (mm): 661

• Overall Width (cm): 56.2
• Overall Width (in): 22.1
• Overall Width (mm): 562

• Power Type: Pneumatic

• Pump Ratio: 38:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CM8F2F

GG CM9A1B

CHECK-MATE SUPPLY UNIT,61:1,0 VOLT,L20C,20L

Graco CM9A1B 61:1 Ratio 20 L L20C Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco L20c - A lightweight, elevator ram on a cart
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pump's quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

GG CM9A3B

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

GG CM9A59

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, D200, 200L

Graco CM9A59 61:1 Ratio 200 L D200 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• For large drums up to 200 liter (55 gal)
• Graco D200 - For high-volume in-plant applications
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: D200

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Drum
• Control Panel Material: N/A

• Material Container Volume (gal): 52.8
• Material Container Volume (l): 200

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kg/cm 2): 10.55
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 420.6
• Maximum Fluid Pressure (kPa): 42060
• Maximum Fluid Pressure (psi): 6100

• Maximum Fluid Pressure (bar): 420.6
• Maximum Fluid Pressure (kPa): 42060
• Maximum Fluid Pressure (psi): 6100

• Maximum Height (cm): 259.9
• Maximum Height (ft): 8.53
• Maximum Height (in): 102.3
• Maximum Height (m): 2.6
• Maximum Height (mm): 2599

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 421
• Maximum Working Pressure (kPa): 42100
• Maximum Working Pressure (MPa): 42.1
• Maximum Working Pressure (psi): 6100

• Minimum Height (cm): 164.6
• Minimum Height (ft): 5.4
• Minimum Height (in): 64.8
• Minimum Height (m): 1.65
• Minimum Height (mm): 1646

• Overall Depth (cm): 63.5
• Overall Depth (in): 25
• Overall Depth (mm): 635

• Overall Width (cm): 106.7
• Overall Width (in): 42
• Overall Width (mm): 1067

• Power Type: Pneumatic

• Pump Ratio: 61:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CS00RD

FUSION CS GUN, RD0000

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

Variable flow - an industry first

• First plural-component gun with variable flow
• Switch from large to small spray patterns in seconds
• Gives you more maneuverability to spray in small, tight areas
• Ten different settings

Quick-change front - simpler and cleaner

• Swap out fluid heads in seconds
• Non-stick polymer cover keeps gun head cleaner
• "Air knife" reduces material build-up
• Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

GG CM9C3F

CHECK-MATE SUPPLY UNIT, 61:1, 0 VOLT, S20, 20L

Graco CM9C3F 61:1 Ratio 20 L S20 Supply Unit

Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

• 20 liter (5 gal) pail sizes provides the same proven technologies as the larger systems, but with small NXT Air Motors
• Graco S20 - For low-volume applications of medium to high-viscosity materials
• Industry-first controls give you immediate and important information at the touch of a button
• Platen wipers can be replaced in seconds
• Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
• High-quality, durable parts reduce maintenance time, maximize uptime

• Model: Check-Mate
• Series: S20

• Ambient/Warm Melt/Hot Melt: Ambient
• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Container Type: Pail
• Control Panel Material: N/A

• Material Container Volume (gal): 5.3
• Material Container Volume (l): 20

• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kg/cm 2): 8.79
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (GPM): 0.9
• Maximum Flow Rate (L/min): 3.4

• Maximum Fluid Pressure (bar): 420.6
• Maximum Fluid Pressure (kPa): 42060
• Maximum Fluid Pressure (psi): 6100

• Maximum Fluid Pressure (bar): 420.6
• Maximum Fluid Pressure (kPa): 42060
• Maximum Fluid Pressure (psi): 6100

• Maximum Height (cm): 150.6
• Maximum Height (ft): 4.94
• Maximum Height (in): 59.3
• Maximum Height (m): 1.51
• Maximum Height (mm): 1506

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 421
• Maximum Working Pressure (kPa): 42100
• Maximum Working Pressure (MPa): 42.1
• Maximum Working Pressure (psi): 6100

• Minimum Height (cm): 90.9
• Minimum Height (ft): 2.98
• Minimum Height (in): 35.8
• Minimum Height (m): 0.91
• Minimum Height (mm): 909

• Overall Depth (cm): 48.26
• Overall Depth (in): 19
• Overall Depth (mm): 482.6

• Overall Width (cm): 43.18
• Overall Width (in): 17
• Overall Width (mm): 431.8

• Power Type: Pneumatic

• Pump Ratio: 61:1
• Pump Type: Priming Piston

• Ram Material: Carbon Steel

GG CS22WD

FUSION CS GUN, WD2222

Graco CS22WD Fusion CS Gun, 8-9 in (203-229 mm) Wide Round Spray Pattern, 0.022 in (0.56 mm) Mix Chamber

ClearShot Technology sets the Fusion CS gun apart from every other applicator. With its revolutionary technology, the Fusion CS is poised to virtually eliminate drilling of the mix chamber - increasing your spraying uptime and reducing downtime spent on maintenance. Flexible for polyurea and foam applications, this gun provides you with versatile advantages.

• New technology comprised of ClearShot Liquid and disposable, non-reusable ClearShot Cartridge
• Removes foam and keeps mix chamber clear
• Saves almost an hour of maintenance time each spray day
• Easy-to-insert cartridge fits into ergonomic handle
• Variable flow - an industry first

  First plural-component gun with variable flow

  Switch from large to small spray patterns in seconds

  Gives you more maneuverability to spray in small, tight areas

  Ten different settings

  • Quick-change front - simpler and cleaner

    Swap out fluid heads in seconds

    Non-stick polymer cover keeps gun head cleaner

    Air knifereduces material build-up

    Fast and simple change-outs put an end to lengthy interruptions and keep jobs on schedule

    
    

    • Model: Fusion CS
    • Series: Round
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPT
    • Compatible Material: Polyurethane, Polyurea, Spray Polyurethane Foam, No-Heat Foam
    • Component A Inlet Size (cm): 1.27
    • Component A Inlet Size (in): 1/2-20
    • Component A Inlet Size (mm): 12.7
    • Component A Inlet Thread Type: UNF
    • Component B Inlet Size (cm): 1.42875
    • Component B Inlet Size (in): 9/16-18
    • Component B Inlet Size (mm): 14.2875
    • Component B Inlet Thread Type: UNF
    • Component Type: Plural-Component
    • Fluid Orifice Size (cm): 0.056
    • Fluid Orifice Size (in): 0.022
    • Fluid Orifice Size (mm): 0.56
    • For Use With: Non-Flammable Foam and Polyurea
    • Gun Activation: Manual
    • Gun Type: Liquid-Purge
    • Gun Weight (g): 1180
    • Gun Weight (kg): 1.18
    • Gun Weight (lb): 2.6
    • Gun Weight (oz): 41.6
    • Impingement Port Size (in): 0.022
    • Impingement Port Size (mm): 0.56
    • Includes: Mix Chamber
    • Maximum Air Inlet Pressure (bar): 9
    • Maximum Air Inlet Pressure (kPa): 900
    • Maximum Air Inlet Pressure (MPa): 0.9
    • Maximum Air Inlet Pressure (psi): 130
    • Maximum Air Pressure (bar): 9
    • Maximum Air Pressure (kPa): 900
    • Maximum Air Pressure (MPa): 0.9
    • Maximum Air Pressure (psi): 130
    • Maximum Flow Rate (kg/min): 11.3
    • Maximum Flow Rate (lb/min): 25
    • Maximum Flow Rate @ PSI (lb/min): 25
    • Maximum Fluid Pressure (bar): 241
    • Maximum Fluid Pressure (kPa): 24100
    • Maximum Fluid Pressure (MPa): 24.1
    • Maximum Fluid Pressure (psi): 3500
    • Maximum Fluid Temperature ( degree C): 93
    • Maximum Fluid Temperature ( degree F): 200
    • Maximum Fluid Pressure (bar): 241
    • Maximum Fluid Pressure (kPa): 24100
    • Maximum Fluid Pressure (MPa): 24.1

GG CST215

GG CST331

GG CST335

GG CST415

GG CST417

GG CST419

GG CST421

GG CST427

GG CST425

GG CST431

GG CST435

GG CST443

FRP RS CHOP TIP SPRAY 443

Graco CST443 0.043 in Orifice RS Airless Spray Gun Tip with 8 in Pattern Width

GG CST521

FRP RS CHOP TIP SPRAY 521

Graco CST521 0.021 in Orifice RS Airless Spray Gun Tip with 10 in Pattern Width

GG CST523

GG CST527

GG CST531

GG CST543

GG CST551

GG CSTS53

GG D01001

GG D05331

GG D05010

KIT, BALL-C1 PT

GG D05001

KIT, DIAPHRAGM-C1 PT

GG D05255

GG D05300

KIT, SEAT 515/715 SS

GG D05211

GG D05200

KIT, SEAT 515/715 AC

GG D05366

GG D01006

GG D03211

GG D05277

GG D01096

GG D05330

GG D05005

KIT, DIAPHRAGM-C1 TP

GG D05030

KIT, BALL-C1 SS

GG D05000

KIT, O-RING-C1 FK-PT-8

Graco D05000 1/2-inch Encapsulated Viton Seal Kit

GG D05050

KIT, BALL-C1 TP

GG D05911

GG D05381

GG D05916

GG D05977

GG D05955

GG D07005

KIT, DIAPHRAGM-D1 TP

GG D05931

GG D05A11

GG D05311

GG D07006

KIT, DIAPHRAGM-D1 SP

GG CSTT46

GG D05966

GG D07050

KIT, BALL-D1/E1 TP

GG D07030

KIT, BALL-D1/E1 SS

GG D05336