Airpower | GRACO INC. S10595 branded products

Fusion AP Gun, Round 000

GG 246099

FUSION AP GUN, ROUND 000

Graco 246099 Round Fusion Air-Purge Gun with 000 Mix Chamber and 0.020 in (0.51 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.051
Fluid Orifice Size (in): 0.020
Fluid Orifice Size (mm): 0.51

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.020
Impingement Port Size (mm): 0.50

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 000 (.020)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 5 in @ 24 in from target

$3,680.00

Repair Kit Guard

GG 246290

Repair Kit Guard

$103.50

Kit, Repair, #007 O-Rings

GG 246354

Kit, Repair, #007 O-Rings

$25.20

Kit, Repair, Manifold Vlv

GG 246356

Kit, Repair, Manifold Vlv

$81.75

Kit, Repair, Ft O-Ring, Ptfe

GG 246360

Kit, Repair, Ft O-Ring, Ptfe

$25.60

Kit, Repair, Compl. O-Rings

GG 246355

Kit, Repair, Compl. O-Rings

$180.50

Kit, Repair, Screen, 80 Mesh

GG 246359

Kit, Repair, Screen, 80 Mesh

$57.50

Husky Pump, 716 Drum w/Riser

GG 246367

HUSKY PUMP, 716 DRUM W/RISER

Husky 716 Diaphragm Pump with Drum Riser Tube

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-portingNo mechanical seals which causes fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks3/4 in (19.05 mm) center- and end-portingNo seals to leak or failQuiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks

$1,685.00

Kit, Accessory, Front End, Spare

GG 246361

Kit, Accessory, Front End, Spare

$1,955.00

Husky 1050 Diaphragm Pump with Drum Riser Tube

GG 246368

HUSKY PUMP, 1050 W/RISER

Husky 1050 Diaphragm Pump with Drum Riser Tube

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

Eliminates air leaks for more efficient operation

Four Bolt Joint Design

Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

Increased number of ports for installation flexibility

Optional Features

DataTrak - Runaway protection and tracks material usage
Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

$2,260.00

Kit, Compl., H1050 (Air/Fluid)

GG 246376

KIT, COMPL., H1050 (AIR/FLUID)

Complete Husky 1050 Supply Pump System

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Benefits of the Husky 1050 Double Diaphragm Pump

Up to 5 times longer diaphragm life compared to other air-operated diaphragm pumps in its class
Expanded material offering to handle endless applications
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation.
Offered in ATEX configuration.

30% more efficient than the market leader

20% increase in fluid flow compared to the Husky 1050

Up to 5 times longer diaphragm life compared to other double diaphragm pumps in its class

Expanded material offering to handle endless applications

$4,950.00

Kit, Repair, Filter, 100 Mesh

GG 246382

KIT, REPAIR, FILTER, 100 MESH

Easy Out Pump Manifold Filter, Short, 100 meshUsing an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 100 mesh for materials such as lacquers and solvent-based enamels and paints.

$12.30

Kit, Repair, Filter, 60 Mesh

GG 246384

KIT, REPAIR, FILTER, 60 MESH

Easy Out Pump Manifold Filter, Short, 60 meshUsing an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 60 mesh for materials such as latex primers, latex, and latex enamels.Maximize spray performance with Easy Out manifold filterSave time and money by extending the life of your equipment and reducing down timeFilter keeps dirt, debris and contaminants out of the spray system for smooth, professional quality finishDesigned to filter the paint from the inside out for most effective filtering and easier clean upUse 60 mesh for materials such as latex primers, latex, and latex enamels

$12.30

Kit, Repair, Strainer

GG 246385

KIT, REPAIR, STRAINER

Inlet Strainer, Nylon Cap, 7/8 inUsing an Inlet Strainer is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time.Using an Inlet Strainer is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down timeRemoves debris from the coating protecting the pump, reducing tip clogging and providing a better quality finishProvides first stage of filtrationDesigned for easy field replacementConnection is 7/8-in thread

$16.50

Kit, Repair, Pump, E20/Xp1

GG 246420

Kit, Repair, Pump, E20/Xp1

$362.00

Kit, Repair, Pump

GG 246421

Kit, Repair, Pump

$362.00

Kit, Repair, Filter, 30 Mesh

GG 246425

KIT, REPAIR, FILTER, 30 MESH

Easy Out Pump Manifold Filter, Short, 30 meshUsing an Easy Out Pump Manifold Filter is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time. Use 30 mesh for materials such as heavy latex, block filler, or elastomeric.

$12.30

Endurance Chromex Piston Pump

GG 246428

KIT, REPAIR, PUMP, 021/023

Endurance Chromex Piston PumpGenuine Graco Endurance Pumps lead the industry in durability and ease of installation. Keep a spare on hand to minimize downtime in the field.Replacement pump for GMAX 3400 Standard Series sprayers model year 2005 and newer.Lasts 2X Longer than competing pumpsChromex rod and hardened stainless steel cylinderLong Life V-Max Blue PackingsFaster cleaning with the QuikAccess intake valve

$405.00

Guard, Rac X, 11/16"

GG 246437

GUARD, RAC X, 11/16"

RAC X HandTite Tip Guard, 11/16 inThe RAC X HandTite Tip Guard helps to eliminate paint build-up, dripping and spitting. It also helps to provide safer spraying at higher pressures. Its finger grip design makes it easy to attach or remove without the need for tools. For use with all RAC X SwitchTips.

11/16 in (17 mm) thread size, older style Graco Pole Guns

Fits competitive guns with 11/16 in threads

$43.60

Kit, Repair, Inlet Valve/Seat

GG 246429

Kit, Repair, Inlet Valve/Seat

$61.75

Gasket, Rac X, 5 Pack

GG 246453

GASKET, RAC X, 5 PACK

RAC X One Seal, 5 packCompatible with most materials. Easy installation withtools. Use only with RAC X SwitchTips and Guards.

$31.00

Kit, Accy, Drum Return Tube

GG 246477

Kit, Accy, Drum Return Tube

$554.00

Husky Pump, 515Ac-Pp01Aac3-2Acbnbnpt

GG 246484

HUSKY PUMP, 515AC-PP01AAC3-2ACBNBNPT

Husky 515 Diaphragm Pump

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

$1,600.00

Husky Pump, 716A-Pp01Aa1-4Ssssptpt

GG 246485

HUSKY PUMP, 716A-PP01AA1-4SSSSPTPT

Husky 716 Diaphragm Pump

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-portingNo mechanical seals which causes fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks3/4 in (19.05 mm) center- and end-portingNo seals to leak or failQuiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks

$1,260.00

Valve

GG 246501

Valve

$940.00

Kit, Repair, Gears

GG 246596

KIT,REPAIR, GEARS

KIT INCLUDES: SHAFT, SUB-ASSY, HELICAL GEAR [QTY. 1], SHAFT, SUB-ASSY, HELICAL GEAR [QTY. 1], O-RING, SEAL, HELICAL GEAR METER [QTY. 2], SPACER, SHAFT, GEAR [QTY. 1]

$2,490.00

Kit, Repair, Cleanout #53

GG 246627

Kit, Repair, Cleanout #53

$54.00

Kit, Repair, Cleanout Tool #55

GG 246628

Kit, Repair, Cleanout Tool #55

$54.00

Regulator

GG 246642

REGULATOR, MASTIC

Air Operated Mastic Fluid Pressure RegulatorThe mastic regulator is ideal for low to high viscosity sealants or adhesivesThese regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

$3,050.00

Kit, Repair, Cleanout Tool #69

GG 246630

Kit, Repair, Cleanout Tool #69

$54.00

Meter, Heli Gear, Hi Resolution

GG 246652

METER, HELI GEAR, HI RESOLUTION

High Resolution Helical Gear Flow MeterThe High Resolution Helical Gear Flow Meter is used for precise and accurate flow rate measurements of a variety of materials.Positive displacement, helical gear flow meterDesigned to detect a wide range of flow ratesHighly accurate, even with low flow ratesStainless steel, water-base compatible for medium to high viscosity materialsCE-marked for easy integration

$10,220.00

Regulator, Mastic

GG 246643

REGULATOR, MASTIC, HEATED

Air Operated Heated Mastic Fluid Pressure RegulatorThe heated mastic regulator is ideal for low to high viscosity warm-melt and hot-melt sealants or adhesives

$6,110.00

Heated Hose, 2000 PSI, 3/8in x 50ft w/ SG

GG 246678

REACTOR HEATED HOSE, 2000PSI, 3/8ID W/SGRD

50 ft x 3/8 in Heated Hose, 2000 psi, Thermocouple, Mesh Scuff, Reactor 1

Gracoâ€™s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportionersCovered with proprietary butyl cover for protection against moisture sensitive isocyanateHoses are covered with foam insulation for heat retentionDifferent fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses togetherHoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittingsHelix-design whip hose uses braided copper wires for added flexibility and longer life

$2,660.00

Heated Hose 3/8 x 50Ft

GG 246679

REACTOR HEATED HOSE, 3500PSI, 3/8 W/SCFGRD

50 ft x 3/8 in Heated Hose, 3500 psi, Thermocouple, Mesh Scuff, Reactor 1

Gracoâ€™s heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

For Reactor proportioners.

New multi-strand copper heating element has greatly increased hose quality:

Provides 10-times* the flex life compared to previous flat copper heating element
Long-term, even heating without hot spots
Backwards compatible with existing Reactor heated hoses

Copper-heated hoses are designed specifically for use with Graco proportionersCovered with proprietary butyl cover for protection against moisture sensitive isocyanateHoses are covered with foam insulation for heat retentionDifferent fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses togetherHoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittingsHelix-design whip hose uses braided copper wires for added flexibility and longer life

$3,780.00

Regulator, Mastic, Air Cont

GG 246687

REGULATOR, MASTIC

Air Operated Mastic Fluid Pressure RegulatorThese regulators control downstream pressure for mastic or semi-solid material. Install a regulator ahead of each spray gun or extruder gun in a multiple outlet system. The regulator provides precise pressure control to each spray gun from a common header system. It also dampens flow surges when line valves are opened and during pump stroke changeover.

$2,900.00

Regulator, Mastic, HID

GG 246688

Regulator, Mastic, HID

$0.00

Kit, Repair, Check Valve, Iso

GG 246731

Kit, Repair, Check Valve, Iso

$125.50

Fireball 225 Pump, 3:1, (Universal)

GG 246775

FIREBALL 225 PUMP, 3:1, (UNIVERSAL)

Mini Fire-BallÂ® 225 3:1 Universal Size Oil Pump

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 3:1 is perfect for medium pressure, low volume oil applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,245.00

Fireball 225 Pump, Mini, Gr, 50:1

GG 246780

FIREBALL 225 PUMP, MINI , GR, 50:1

Mini Fire-BallÂ® 225 50:1 Pump for 120 lb (55 kg). Drum

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,385.00

Fireball 225 Pump, Grease, 50:1, 400#

GG 246781

FIREBALL 225 PUMP, GREASE, 50:1, 400#

Mini Fire-BallÂ® 225 50:1 400 lb (180 kg). Grease Pump

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,630.00

Kit, Repair, Cleanout Tool #54

GG 246809

Kit, Repair, Cleanout Tool #54

$54.00

Pump

GG 246830

Pump

$0.00

Pump Displacement, w/Lube, 552

GG 246831

Pump Displacement, w/Lube, 552

$0.00

Pump, Displ, W/Lube, .743 ORDER GG 2007119

GG 246832

Pump, Displ, W/Lube, .743 ORDER GG 2007119

$0.00

Kit, Supply, 2:1 (W/Plumb)

GG 246898

KIT, SUPPLY, 2:1 (W/PLUMB)

Graco 246898 T2 Package: Includes 2 Pumps (Stainless Steel) and 2 Supply hoses

Gracos family of transfer pumps maintains performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

Application: Ideal for moving A and B materials to Reactor spray machines.

Provide consistent feed pressures and flow rates for dependable results
Lower pressure drops with higher viscosity materials at any ambient temperature
Designed and manufactured by the worldwide leader in pump technology
Quick-release bung adapter for easy drum removal without interference from hose connections
Stainless steel wetted parts for corrosion-resistance
PTFE seals for improved performance and less maintenance

Model: T2

Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Compatible Material: Polyurethane Materials

Cycles Per Gallon: 15.9

Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT

Material: Stainless Steel

Maximum Air Inlet Pressure (bar): 12.5
Maximum Air Inlet Pressure (kPa): 1250
Maximum Air Inlet Pressure (MPa): 1.2
Maximum Air Inlet Pressure (psi): 180

Maximum Continuous Cycle Rate (CPM): 100

Maximum Flow Rate (GPM): 5
Maximum Flow Rate (L/min): 19

Maximum Operating Temperature ( degree C): 88
Maximum Operating Temperature ( degree F): 190

Maximum Working Pressure (bar): 28
Maximum Working Pressure (kPa): 2800
Maximum Working Pressure (MPa): 2.8
Maximum Working Pressure (psi): 405

Package Options: Supply Hose

Pump Ratio: 2.25:1

$5,570.00

Fireball 225 Pump, 3:1, Bung Mt, 55/275 Gal

GG 246907

FIREBALL 225 PUMP, 3:1 , BUNG MT, 55/275 GAL

Mini Fire-BallÂ® 225 3:1 55 Gallon (200 Liter) Oil Pump - Bung Mounted Package

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 3:1 is perfect for medium pressure, low volume oil applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,570.00

Fireball 225 Pump, Grease, 50:1 35#

GG 246909

FIREBALL 225 PUMP, GREASE, 50:1 35#

Mini Fire-BallÂ® 225 50:1 35 lb (16 kg). Grease Pump

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,385.00

Dispenser, Port, Fb 225, 50:1, 35#

GG 246910

DISPENSER, PORT, FB 225, 50:1, 35#

Mini Fire-BallÂ® 225 50:1 35 lb. and 50 lb. (16 kg and 23 kg) Grease Pump - Portable Pail Dispenser Package

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$2,590.00

Kit, Repair, Gears

GG 246949

KIT, REPAIR, GEARS

KIT INCLUDES: GEAR, ASSY, HIGH RESOLUTION [QTY. 1], SHAFT, SUB-ASSY, HELICAL GEAR [QTY. 1], O-RING, SEAL, HELICAL GEAR METER [QTY. 2], SPACER, SHAFT, GEAR [QTY. 1]

$2,760.00

Kit, Accessory, Throat Pump, .396

GG 246962

Kit, Accessory, Throat Pump, .396

$239.00

Fusion AP Gun, Af2929, ft0438

GG 247112

FUSION AP GUN, AF2929, FT0438

Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications.Easy air-blast tip cleaning reduces build-up and tip clogging.Long-lasting side seals means less downtime for maintenanceQuick-release fluid housing - lets you easily change the mix chambers without toolsHand-tightened front cap - no tools needed to clean and maintain seals and mix chamberErgonomic handle

$3,940.00

Kit, Accy, Throat Pump, .552

GG 246963

Kit, Accy, Throat Pump, .552

$234.00

Kit, Repair, Fb 225, 3:1

GG 246918

Kit, Repair, Fb 225, 3:1

$215.50

Fusion Ap Gun, .024in Orifice Size, .029in Impingement Port, 8-10in Flat Pattern Size

GG 247111

FUSION AP GUN, AF2929, FT0424

Graco 247111 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 00 (.029)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 8-10 in @ 24 in from target

$3,940.00

Duraflex Hose, Coupled, 50ft, Pkgd W/Conn

GG 247340

DURAFLEX HOSE, COUPLED, 50', PKGD W/CONN

DuraFlex Hose 1/4 in x 50 ftUse with any Graco Magnum airless paint sprayer. Link multiple airless hose together for additional reach. Consult sprayer manual for maximum hose length supportedGraco DuraFlex Airless Paint Hose with its superior flexibility and durability is designed for ease of use while spraying under pressure. Minimal hose coil memory reduces tangling and kinks when uncoiling or coiling or moving the hose around the project. Conductive core meets the highest safety standards.Hose measures 50 ft. by 1/4 in.Maximum working pressure is 3000 psiZinc-plated spring guards are corrosion resistantFor use with Magnum or Graco Airless Paint SprayersConsult sprayer manual for maximum hose length supportedIncludes 1/4 in. x 1/4 in. connector

$95.50

Kit, Proportioner Pump, 120

GG 247377

Kit, Proportioner Pump, 120

$6,390.00

Kit, ACC, Throat Pump, Bot, Comp

GG 246928

Kit, ACC, Throat Pump, Bot, Comp

$619.00

Fusion AP Gun, Af2020, ft0424

GG 247101

FUSION AP GUN, AF2020, FT0424

Graco 247101 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.020 in (0.51 mm) Impingement Port and 8-10 in (203-254 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.020
Impingement Port Size (mm): 0.50

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 000 (.020)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 10 in @ 24 in from target

$3,940.00

Kit, Repair, Plug, Throat Seal

GG 247394

Kit, Repair, Plug, Throat Seal

$71.75

Meter, Inline

GG 247453

METER, INLINE

Graco 247453 SDI15 Med/High Pressure, Med/High Flow In-Line Meter for Petroleum- and Synthetic-Based Oils, Antifreeze, Windshield Washer Fluid

These durable, easy-to-use in-line electronic dispense meters are designed with automotive dealerships, fast lube centers, and service shops in mind.

Application: Typical applications include automotive, fast lube centers, service shops, heavy-duty dealerships, fleet service facilities, in-plant and mining.

Rugged stainless steel body remains corrosion free in hard environments for years of trouble-free service.
Large, easy-to-read LCD display show dispense quantities.
Simple operator controls and measures in pints, quarts, liters or gallons.
Energy efficient powered by two AA alkaline batteries.
Compatible with Petroleum- and synthetic-based oils (motor, gear and ATF), antifreeze, windshield washer fluid, and diesel exhaust fluid.

Model: SDI15

Battery Chemistry: Alkaline
Battery Size: AA

Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze, Windshield Washer Fluid

For Use With: petroleum-based and synthetic oils and antifreeze

Inlet Size (cm): 1.27
Inlet Size (in): 0.5
Inlet Size (mm): 12.7

Inlet Thread Type: NPT

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 57

Maximum Operating Temperature ( degree C): 50
Maximum Operating Temperature ( degree F): 122

Maximum Working Pressure (bar): 105
Maximum Working Pressure (kPa): 10500
Maximum Working Pressure (MPa): 10.5
Maximum Working Pressure (psi): 1500
Meter Accuracy (%): plus/minus 00.5
Meter Repeatability (%): plus/minus 00.15

Minimum Operating Temperature ( degree C): -20
Minimum Operating Temperature ( degree F): -4

$857.00

Kit, 2200 To Wall Brkt/Flr Std

GG 247312

Kit, 2200 To Wall Brkt/Flr Std

$499.00

Fusion Mp Gun, Mr3535, Rtm040

GG 247212

FUSION MP GUN, MR3535, RTM040

Graco 247212 Round Pattern Fusion Mechanical Purge Gun with 0.040 in (1.0 mm) Orifice Size and Mix Chamber with 0.035 in (0.89 mm) Impingement Port

Whether youre spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.

Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
Long-lasting PolyCarballoy mix module
Advanced mix module and tip provides superior mixing capabilities

Model: Fusion MP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT

Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam
Component A Inlet Size (cm): 1.27

Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.42875
Component B Inlet Size (in): 9/16-18
Component B Inlet Size (mm): 14.2875
Component B Inlet Thread Type: UNF
Component Type: Plural-Component

Fluid Orifice Size (cm): 0.102
Fluid Orifice Size (in): 0.040
Fluid Orifice Size (mm): 1.02

For Use With: Non-Flammable Foam and Polyurea

Gun Activation: Manual
Gun Included: 1
Gun Type: Mechanical-Purge
Gun Weight (g): 1315
Gun Weight (kg): 1.32
Gun Weight (lb): 2.9
Gun Weight (oz): 46.4

Impingement Port Size (in): 0.035
Impingement Port Size (mm): 0.89
Impingement Type: Standard

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Maximum Fluid Working Pressure (bar): 245
Maximum Fluid Working Pressure (MPa): 24.5
Maximum Fluid Working Pressure (psi): 3500

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Module: .035

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.3
Overall Length (in): 7.6
Overall Length (mm):

$4,560.00

Kit, Filter, Sst, 1, Df

GG 247480

Kit, Filter, Sst, 1, Df

$2,930.00

Hydra-Clean System, 12:1 Wall Mt

GG 247550

HYDRA-CLEAN SYSTEM, 12:1 WALL MT

Hydra-CleanÂ® 12:1 Wall Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Gracoâ€™s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applicationsGreat for high pressure cleaning and sanitizingFits most pressure, flow and material requirementsUse with open-head universal drumsDesigned to use with cold or hot water up to 180Â°F (82Â°C)Spray down portability for use in sanitary applicationsSupports multiple gunsEfficient cleaning with water, detergent or chemical solutions

$19,560.00

Fireball 225 Pump, Base, 50:1, 120#

GG 246915

FIREBALL 225 PUMP, BASE, 50:1, 120#

Mini Fire-BallÂ® 225 50:1 120 lb. (54 kg) Grease Pump - Portable Package Caster Base

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$2,850.00

Kit, Accy, Air Fltr/Reg 1/4Npt

GG 246946

Kit, Accy, Air Fltr/Reg 1/4Npt

$266.00

KIT, ACCY, THROAT PUMP, .743

GG 246964

KIT, ACCY, THROAT PUMP, .743

$234.00

Fireball 225 Pump, Stat, 50:1, 120#

GG 246914

FIREBALL 225 PUMP, STAT, 50:1, 120#

Mini Fire-BallÂ® 225 50:1 120 lb. (54 kg) Grease Pump - Stationary Supply Package

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 50:1 is perfect for medium pressure, low volume grease applications.Durable Casting - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$2,270.00

Flat Pattern Fusion Mechanical Purge Gun With .024 In Orfice And Mix Chamber With .018 Port

GG 247258

FUSION MP GUN, MF1818, FTM424

Graco 247258 Flat Pattern Fusion Mechanical Purge Gun with 0.024 in (0.61 mm) Orifice Size and Mix Chamber with 0.018 in (0.46 mm) Impingement Port

Whether youre spraying polyurea coatings or spray foam insulation, the Fusion MP Gun handles it all. Its rugged design provides excellent mix and material properties - giving you great results at the jobsite.

Application: For high output spray polyurethane foam and polyurea applications.

Easy mechanical cleaning - mix modules and tips are cleaned with a drill bit
Long-lasting PolyCarballoy mix module
Advanced mix module and tip provides superior mixing capabilities

Model: Fusion MP
Series: Flat

Compatible Material: Polyurethane, Roof Coating, Polyurea, Spray Polyurethane Foam, No-Heat Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Mechanical-Purge
Gun Weight (g): 1315
Gun Weight (kg): 1.32
Gun Weight (lb): 2.9
Gun Weight (oz): 46.4

Impingement Type: Standard

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Module: .018

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.3
Overall Length (in): 7.6
Overall Length (mm): 193
Overall Width (cm): 7.9
Overall Width (in): 3.1
Overall Width (mm): 79

Pattern Size (in): 10 in @ 24 in from target

$4,560.00

Hydra-Clean® 30:1 Wall Mount Pneumatic Pressure Washer Package

GG 247554

HYDRA-CLEAN SYSTEM, 30:1 WALL MT

Hydra-CleanÂ® 30:1 Wall Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Gracoâ€™s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applicationsGreat for high pressure cleaning and sanitizingFits most pressure, flow and material requirementsUse with open-head universal drumsDesigned to use with cold or hot water up to 180Â°F (82Â°C)Spray down portability for use in sanitary applicationsSupports multiple gunsEfficient cleaning with water, detergent or chemical solutions

$24,100.00

Kit, Seal, Cylinder, 140

GG 247581

Kit, Seal, Cylinder, 140

$638.00

Fusion AP Gun, Af5252, ft0838

GG 247137

FUSION AP GUN, AF5252, FT0838

Graco 247137 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.052 in (1.3 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.097
Fluid Orifice Size (in): 0.038
Fluid Orifice Size (mm): 0.97

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.052
Impingement Port Size (mm): 1.30

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 02 (.052)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 16-18 in @ 24 in from target

$3,940.00

Kit, Piston, 140

GG 247585

Kit, Piston, 140

$705.00

Kit, Accy, Air Fltr/Reg, 1/2 Npt

GG 246947

KIT, ACCY, AIR FLTR/REG, 1/2 NPT

Graco 246947 Regulator / Filter Assembly 1/2" npt(f) (12.7 mm) for Husky 1050, 1590, 15120, 2150 and 2200 pumps

Application: For use with Husky 1040, 1590, and 2150 Pumps.

1/2 NPT
250 psi Working Pressure

Air Inlet Size (cm): 1.27
Air Inlet Size (in): 1/2
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Air Outlet Size (cm): 1.27
Air Outlet Size (in): 1/2
Air Outlet Size (mm): 12.7
Air Outlet Thread Gender: Female
Air Outlet Thread Type: NPT

$275.50

Kit, Adapter, Throat, 140

GG 247587

Kit, Adapter, Throat, 140

$190.50

Filter, Stand, Assy

GG 247504

Filter, Stand, Assy

$10,600.00

Kit, Manifold, Strainer, Wye

GG 247503

Kit, Manifold, Strainer, Wye

$522.00

Kit, Reactor, Circulation

GG 247576

Kit, Reactor, Circulation

$6,390.00

Kit, Seal, Piston, 140

GG 247579

Kit, Seal, Piston, 140

$638.00

Fusion AP Gun, Af2929, ft0624

GG 247113

FUSION AP GUN, AF2929, FT0624

Graco 247113 Flat Pattern Fusion Air-Purge Gun with 0.024 in (0.61 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 12-14 in (305-356 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam

Fluid Orifice Size (cm): 0.061
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.61

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Flow Rate @ PSI (lb/min): 50

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 00 (.029)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 12-14 in @ 24 in from target

$3,940.00

Dispense Valve, XDV20 Flex

GG 247721

XDV20 VALVE, FLEX

XDV20 Series Control Valve - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the XDV20 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 20 gpm (75.7 lpm).

High-flow, non-metered oil dispense for Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 1/2 in. NPT with swivelFeatures flexible extension with high flow nozzle

$516.00

Valve, Sdv15, Gear Lube

GG 247714

SDV15 VALVE, GEAR LUBE EXT

Graco 247714 SDV15 Series Gear Fluid Control Valve - Gear Extension - 1/2 in. (13 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the SDV15 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 15 gpm (56.8 lpm).

Application: Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, In-plant, Lube trucks, and Mining.

Lock-on/Lock-off trigger allows hands free operation
Sturdy cast body designed for use in tough environments
Inlet 1/2 in. NPT with swivel

Model: SDV15

Compatible Material: Gear Lube

Dispense Type: Manual

Display Type: N/A

Extension Type: Gear Lube

Includes: Nozzle, Extension
Inlet Size (cm): 1.27
Inlet Size (in): 1/2
Inlet Size (mm): 12.7

Inlet Thread Gender: Female
Inlet Thread Type: NPT

Maximum Operating Temperature ( degree C): 82
Maximum Operating Temperature ( degree F): 180

Maximum Working Pressure (bar): 103.4
Maximum Working Pressure (kPa): 10340
Maximum Working Pressure (psi): 1500

Minimum Operating Temperature ( degree C): -40
Minimum Operating Temperature ( degree F): -40

Outlet Size (cm): 1.905
Outlet Size (in): 3/4
Outlet Size (mm): 19.05
Outlet Thread Gender: Female
Outlet Thread Type: Straight Thread O-Ring Boss

Recommended Environment: Indoor, Outdoor

$482.00

Dispense Valve, SDV15, Rigid Ext.

GG 247712

SDV15 VALVE, RIGID EXT

SDV15 Series Oil Control Valve - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the SDV15 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 15 gpm (56.8 lpm).

Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 1/2 in. NPT with swivelFeatures rigid extension with oil nozzle

$469.00

Kit, Gasket, Inlet

GG 247771

Kit, Gasket, Inlet

$115.00

Hydra-Clean System, 12:1 Cart Mt

GG 247549

HYDRA-CLEAN SYSTEM, 12:1 CART MT

Hydra-CleanÂ® 12:1 Cart Mount Pneumatic Pressure Washer Package

Clean up your facility the quick, easy and efficient way with Graco Hydra-Clean pressure washers! Designed with Gracoâ€™s NXT air motor, it's ideal for industrial and sanitary applications including food processing facilities, heavy duty cleaning, maintenance, shipyards, oil rigs and more.

Ideal for heavy duty cleaning and maintenance for industrial and sanitary applicationsGreat for high pressure cleaning and sanitizingFits most pressure, flow and material requirementsUse with open-head universal drumsDesigned to use with cold or hot water up to 180Â°F (82Â°C)Spray down portability for use in sanitary applicationsSupports multiple gunsEfficient cleaning with water, detergent or chemical solutions

$20,790.00

Kit, Fltr, Oil, 18-23 Psi Bypass

GG 247792

Kit, Fltr, Oil, 18-23 Psi Bypass

$68.50

Dispense Valve, Ridgid

GG 247722

XDV20 VALVE, RIGID HF

XDV20 Series Control Valve - Rigid Extension - 3/4 in. (19 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the XDV20 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 20 gpm (75.7 lpm).

High-flow, non-metered oil dispense for Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 3/4 in. NPT with swivelFeatures rigid extension with high flow nozzle

$516.00

Valve, SDV15, Flex Extension

GG 247713

SDV15 VALVE, FLEX EXT

SDV15 Series Oil Control Valve - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the SDV15 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 15 gpm (56.8 lpm).

Typical applications include Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, Service shops, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 1/2 in. NPT with swivelFeatures flexible extension with oil nozzle

$469.00

Kit, Cable, Communication

GG 247801

Kit, Cable, Communication

$256.50

Non-Metered Dispense Valve

GG 247718

XDV20 VALVE, RIGID

XDV20 Series Control Valve - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the XDV20 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 20 gpm (75.7 lpm).

High-flow, non-metered oil dispense for Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 1/2 in. NPT with swivelFeatures rigid extension with high flow nozzle

$516.00

Kit, Module, Heater Control

GG 247827

Kit, Module, Heater Control

$1,165.00

Guard, Impact, Yellow

GG 247760

Guard, Impact, Yellow

$188.50

Kit, Bracket, Mtg, Pump, Hyd

GG 247830

Kit, Bracket, Mtg, Pump, Hyd

$190.50

Kit, Housing, Inlet, Reservoir

GG 247778

Kit, Housing, Inlet, Reservoir

$319.00

Dispense Valve, XDV20, Flex HF

GG 247723

XDV20 VALVE, FLEX HF

XDV20 Series Control Valve - Flexible Extension - 3/4 in. (19 mm) Inlet - NPT

For standard and heavy-duty applications, both indoor and outdoor, the XDV20 control valves are designed to perform in larger dealerships with longer plumbing runs and greater fluid usage. The control valve is compatible with a wide range of nozzles and fluid extensions and is capable of pumping oil up to 20 gpm (75.7 lpm).

High-flow, non-metered oil dispense for Automotive dealerships, Heavy-duty dealerships, Fast lube centers, Fleet service facilities, In-plant, Lube trucks, and Mining.Lock-on/Lock-off trigger allows hands free operationSturdy cast body designed for use in tough environmentsInlet 3/4 in. NPT with swivelFeatures flexible extension with high flow nozzle

$516.00

Kit, Cylinder, 140

GG 247583

Kit, Cylinder, 140

$638.00

Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

GG 247117

FUSION AP GUN, AF2929, FT0838

Graco 247117 Flat Pattern Fusion Air-Purge Gun with 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port and 16-18 in (406-457 mm) Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Flat

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35

Compatible Material: Polyurea, Non-Flammable Polyurethane Foam

Fluid Orifice Size (cm): 0.097
Fluid Orifice Size (in): 0.038
Fluid Orifice Size (mm): 0.97

Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40

Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70
Includes: AF2929 Mix Chamber, FT0838 Flat Tip

Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9

Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130

Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature ( degree C): 93
Maximum Fluid Temperature ( degree F): 200

Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80

Mix Chamber: 00 (.029)

Overall Height (cm): 20.6
Overall Height (in): 8.1
Overall Height (mm): 206
Overall Length (cm): 19.1
Overall Length (in): 7.5
Overall Length (mm): 191
Overall Width (cm): 8.4
Overall Width (in): 3.3
Overall Width (mm): 84

Pattern Size (in): 16-18 in @ 24 in from target

$3,940.00

Hydra-Clean Gun, And Wand Assy Sst

GG 247879

Hydra-Clean Gun, And Wand Assy Sst

$919.00

Hydra-Clean Pump, Disp, Recip

GG 247599

Hydra-Clean Pump, Disp, Recip

$10,990.00

Kit, Carbon Filled Ptfe V Pk

GG 247881

KIT, CARBON FILLED PTFE V PK

$1,215.00