Airpower | GRACO INC. S10595 branded products

GG 248129

Kit, Bulk, Ck Vlv Rad Seal

$41.10

GG 248098

KIT,REPAIR, CARTRIDGE

KIT INCLUDES: CARTRIDGE, ASSEMBLY [QTY. 1], KIT INCLUDES: KIT, REPAIR, SEALS [QTY. 1], BALL, CHECK, 2.0 [QTY. 1], BALL, CHECK, 1.25 [QTY. 1], PACKING, O-RING [QTY. 1]

$231.50

GG 248131

Kit, O-ring, Pk 6

$51.00

Husky Pump, 515Ac-Pp01Ap3-1Pptptppt

GG 248174

HUSKY PUMP, 515AC-PP01AP3-1PPTPTPPT

Graco 248174 Husky 515 PP Pump, PP Center Section, PP Seats, TPE Balls & TPE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.
No mechanical seals to cause fluid leaks or failures
Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
Split manifold option to pump multiple fluids without mixing
Delivery up to 15 gpm (56.7 lpm)
Easy-to-service air valve and ball checks
Reliable air valve for years of dependable performance

Model: Husky
Series: 515

Air Exhaust Port Size (in): 3/8
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: TPE (Hytrel)

Center Section Material: Polypropylene

Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

Connection Type: Threaded

Diaphragm Compatible Material: TPE
Diaphragm Material: TPE (Hytrel)

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Polypropylene

Manifold Configuration: Center Port
Manifold O-Ring Material: PTFE Encapsulated Fluoroelastomer
Material: Polypropylene

Maximum Air Consumption (SCFM): 28
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 400

Maximum Flow Rate (GPM): 15
Maximum Flow Rate (L/min): 56.8

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.2383
Maximum Solid Size (in): 0.09375
Maximum Solid Size (mm): 2.4

Minimum Operating Temperature ( degree C): 4
Minimum Operating Temperature ( degree F): 40

Overall Height (in): 10.63

Power Source: Air

$0.00

Kit, Bulk, Ck Vlv Face Oring

GG 248133

Kit, Bulk, Ck Vlv Face Oring

$79.25

Kit, Repair, Pump, 695, 795

GG 248204

Kit, Repair, Pump, 695, 795

$774.00

Bulk O-Ring Kit

GG 248128

Bulk O-Ring Kit

$52.75

Kit, Repair, Pump, 1095/1595

GG 248213

KIT, REPAIR, PUMP, 1095/1595

Pump Packing Repair KitReplace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibilityGracoâ€™s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come.Graco Tech Support can further assist with troubleshooting sprayer operation

$164.50

Kit, Lubricant, Fusion, 10 Pk

GG 248279

Kit, Lubricant, Fusion, 10 Pk

$173.50

Kit, Repair, Packing, 695/795

GG 248212

KIT, REPAIR, PACKING, 695/795

Pump Packing Repair KitReplace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibilityGracoâ€™s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come.Graco Tech Support can further assist with troubleshooting sprayer operation

$137.50

Mini Fire-Ball® 225 3:1 Universal Pump

GG 248230

FIREBALL 225 PUMP, 3:1 , UNIVERSAL

Mini Fire-BallÂ® 225 3:1 Universal Pump

You can't afford down time, especially when your shop is small and your work force depends on equipment performance. The Mini Fire-Ball 225 is an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

The Mini Fire-Ball 225 3:1 is perfect for medium pressure, low volume oil applications.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

$1,460.00

Kit, Grease, Quick-Shot 10Pk

GG 248280

Kit, Grease, Quick-Shot 10Pk

$102.00

Regulator, BP, Air Pilot, Low-Flow

GG 25R487

REGULATOR, BP, AIRPILOT, LOW-FLOW

Low Shear Fluid Back Pressure Regulator, 300 Max psi, 10 gpm Max flow rate, SST, Pneumatic, high wear, sanitary inlet/outletGracoâ€™s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.Air operated model works with Intelligent Paint Kitchen (IPK) control to reduce energy consumption and paint shearUltralife series ceramic coated parts resist wear and increase service lifeLow profile, compact design and backwards compatibility mean easy installation and replacement

$2,270.00

Regulator, BP, Mechanical, Low-Flow

GG 25R488

REGULATOR, BP, MECHANICAL, LOW-FLOW

Low Shear Fluid Back Pressure Regulator, 300 Max psi, 10 gpm Max flow rate, SST, Mechanical, high wear, sanitary inlet/outletGracoâ€™s low shear back pressure regulator (BPR) minimizes shear and prevents paint degradation so that manufacturers produce consistent finish quality.Innovative flow path geometry provides industry-leading low shear capabilityUltralife series ceramic coated seat and flow directors significantly increase wear resistance capability and service lifeBest-in-class performance holds pressure constant while flow rate changes

$1,225.00

BPR MEDIUM PRESSURE 3000 MAX PSI 5 GPM MAX FLOW SST PNEU

GG 25R490

REGULATOR, BACK PRES, MP, AIR, 30 TO 1

Medium Pressure Fluid Back Pressure Regulator, 3000 Max psi, 5 gpm Max flow rate, SST, PneumaticImprove finishing process control with this medium pressure, pneumatic back pressure regulator (BPR).Interface with Gracoâ€™s Intelligent Paint Kitchen (IPK), controlling pressure and flow without human intervention.Gain better resolution than other BPR brands, adjusting more accurately to keep fluid pressure at desired levels.

$3,940.00

5 Gallon (20L) Heated Platen with EPDM Wiper

GG 25R535

5 Gallon (20L) Heated Platen with EPDM Wiper

$3,410.00

Back Pressure Regulator, MP, Mechanical

GG 25R491

REGULATOR, BACK PRESS, MP, MECHANICAL

Medium Pressure Fluid Back Pressure Regulator, 3000 Max psi, 5 gpm Max flow rate, SST, Mechanical with locking nutImprove fluid control without having to add a compressed air line with this spring-operated back pressure regulator (BPR).Easy installation is another benefit of the mechanical medium pressure BPR.

$2,010.00

Kit, PPS V2.0, Adapter

GG 25R579

Kit, PPS V2.0, Adapter

$70.25

Kit, Pps V2.0, Siphon Finex

GG 25R580

Kit, Pps V2.0, Siphon Finex

$45.00

KIT, S6 BALL, Z-PUMP HW

GG 25R749

KIT, S6 BALL, Z-PUMP HW

$2,410.00

iQ Valve Air Piston

GG 25R645

iQ Valve Air Piston

$128.50

iQ Valve Air Cylinder Cap

GG 25R649

iQ Valve Air Cylinder Cap

$217.50

CABLE M8 PIN ANGLED LEAD

GG 25R799

CABLE M8 PIN ANGLED LEAD

$150.00

G-Mini, Grease Lubrication Pump W/ Controller, 24 VDC, 1 Liter

GG 25R801

G-MINI PUMP, 24V, 1L, CONTROLLER

G-MiniÂ® Grease Lubrication Pump with Controller, 24 VDC, 1 LiterMake the most of your space, budget and machines. The new full-featured G-Mini offers reliable lubrication in a small footprint to fit more types of machines. Use it to simplify everyday maintenance, extend lifecycles and optimize uptime. Itâ€™s rugged and tough, perfect for handling the daily, 24/7 rigors of any job, both big and small. Best of all, it comes with a modest price tag â€“ boosting your productivity and profitability.Follower Plate and Stir Paddle - This unique combination combats oil separation while ensuring the pump element â€œloading chamberâ€ is always full.M12 Input - M12 cycle or proximity switch input standard on all pumps with a controller.5-Wire CPC Power Cable - Multifunction cable supplies power to the pump, pairs with a remote manual run button, and provides low level or cycle fault output.1 liter reservoir optionOne Pump Element - 0.18 in3/min (3 cm3/min), 4,100 psi (280 bar)Easy-to-program controller can be utilized for both time based and cycle based systems and provides low level alert and alarm.Rugged Construction - Designed to withstand the harshest of environments; IP69K rated.

$1,085.00

IQ Valve Outlet Manifold, 200MM Nozzle

GG 25R639

IQ Valve Outlet Manifold, 200MM Nozzle

$802.00

IQ VALVE OUTLET MANIFOLD 60MM NOZZLE

GG 25R632

IQ VALVE OUTLET MANIFOLD 60MM NOZZLE

$419.00

Hose, A, 5 ft, 1/4in, Moisture-Lok, SS

GG 262236

Hose, A, 5 ft, 1/4in, Moisture-Lok, SS

$525.00

Hose, A, 25 ft, 1/4in, Moisture-Lok, SS

GG 262240

Hose, A, 25 ft, 1/4in, Moisture-Lok, SS

$940.00

Hose, B, 25 ft, 1/2in Moisture-Lok, SS

GG 262257

Hose, B, 25 ft, 1/2in Moisture-Lok, SS

$1,175.00

Kit, Shot Disp, D200, D60

GG 262370

Kit, Shot Disp, D200, D60

$9,640.00

Kit, Shot Disp, D200, Small Nxt

GG 262371

Kit, Shot Disp, D200, Small Nxt

$0.00

Proportioner, Promi, Remte, 1KS

GG 262381

PROCONTROL 1KS PROPORTIONER, PROMX, REMTE

ProControl 1KS with G3000 Meter

Maintain a closed loop flow control system for a superior finish with the same proven technology as the ProMixÂ® 2KS

Single Component Flow Control

Integrated Flushing

Optional Color Change Modules

Flexible Installation

$24,880.00

Manifold, Mix, Plural Component

GG 262398

MANIFOLD, MIX, PLURAL COMPONENT

Graco 262398 Fluid Mix Manifold for ProMix 2KE Proportioner, Sequential Dosing

$4,340.00

Manifold, Mix Plural Component

GG 262399

MANIFOLD, MIX PLURAL COMPONENT

Kit, U-Cup Repair 5

$700.00

Reactor A-25 Bare Proportioner

GG 262572

REACTOR A-25 PROPORTIONER, BARE

Reactor A-25 Bare Proportioner

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.

For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute.Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray patternEasy to operate and maintainBest choice for affordability and durability

DataTrak Control

Resettable counter tracks material usage

Three Heat Zones

Three independent heat zones â€“ ISO, resin and hose heat
Provide accurate heat control for reliable spraying to handle different chemical viscosities
Digital temperature controls

Recirculation Manifold

A quick, easy way to balance system pressures

NXT Air Motor

Low air consumption for increased efficiency
Muffler provides low operating noise levels
Air valve provides smooth and rapid changeover

Quick Knockdown Lower Pumps

For easy disassembly and maintenance

ISO Pump Lube System

Prevents isocyanate crystallization on the pump seal and shaft

ISO Pump Lube System

Prevents isocyanate crystallization on the pump seal and shaft

$19,660.00

Reactor Pump, A25

GG 262573

Reactor Pump, A25

$8,150.00

Reactor Proportioner, A-25, Wheels, and Datatrak

GG 262614

REACTOR A-25 PROPORTIONER, WHEELS, CYCLE COUNT

Reactor A-25 Proportioner with Wheels, DataTrak

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.

Maintains temperature setpoints for better yieldMaintains consistent output pressure for uniform spray patternEasy-to-service fluid section reduces maintenance and increases productivityBest choice for affordability and durability

DataTrak Control

Resettable counter tracks material usage

Three Heat Zones

Three independent heat zones â€“ ISO, resin and hose heat
Provide accurate heat control for reliable spraying to handle different chemical viscosities
Digital temperature controls

Recirculation Manifold

A quick, easy way to balance system pressures

NXT Air Motor

Low air consumption for increased efficiency
Muffler provides low operating noise levels
Air valve provides smooth and rapid changeover

Quick Knockdown Lower Pumps

For easy disassembly and maintenance

ISO Pump Lube System

Prevents isocyanate crystallization on the pump seal and shaft

ISO Pump Lube System

Prevents isocyanate crystallization on the pump seal and shaft

$20,970.00

Kit, Head, Spray, External Mix

GG 262696

Kit, Head, Spray, External Mix

$140.00

Kit, Insert, Valve Assist, Asm

GG 262697

Kit, Insert, Valve Assist, Asm

$40.50

Kit, Air Cap, Vertical

GG 262699

KIT,AIR CAP,VERTICAL

Graco 262699 Vertical Air Cap Kit

KIT INCLUDES: AIR CAP, ASM, VERT, EXTERNAL MIX [QTY. 1], KIT INCLUDES: AIR CAP, ASM, HORIZ, EXTERNAL MIX [QTY. 1],

$400.00

Cap, Anvil Sleeve

GG 262711

Cap, Anvil Sleeve

$150.00

Kit, Air Cap, Horizontal

GG 262700

KIT,AIR CAP,HORIZONTAL

Graco 262700 Horizontal Air Cap Kit

KIT INCLUDES: AIR CAP, ASM, HORIZ, EXTERNAL MIX [QTY. 1], KIT INCLUDES: AIR CAP, ASM, INTERNAL MIX [QTY. 1],

$435.00

1/2 Inch Ball Valve

GG 262740

1/2 Inch Ball Valve

$0.00

Magnum Sprayer, X7

GG 262805

MAGNUM SPRAYER, X7

Magnum X7 Electric TrueAirless SprayerDIY homeowners and handymen will save time and money with the Magnum X7 with built-in cart. Tackle any interior project, exterior houses, fences and decks. The X7 supports a larger tip size for spraying heavier coatings and the convenient cart makes any painting project faster and easier.Hardened Stainless Steel Piston Pump - Delivers high pressure power to spray unthinned paintsFlexible Suction Hose - Spray directly from 1 or 5 gallon paint containerConvenient Cart - Easily move sprayer around on the jobPaint Saver Pail Hook - Effortlessly move 5 gallon paint container with cartTrueAirless Spray Tip with SoftSpray Technology - greater control and less overspray with a wide range of coatingsPower Flush Adapter - Connects to a garden hose for fast and easy cleaningPushPrime - Fast and reliable start-up every timeAdjustable Pressure Control - Easy control of paint flow

$770.00

GB Gun, Spray

GG 262854

XHF GUN, SPRAY

XHF Airless Spray Gun, XHD RAC Tip

Designed to spray high viscosity materials, the XHF Gun is rugged, reliable and easy to maintain.

For epoxy intumescent fireproofing coatingsHigh-flow, high pressure gunHandles epoxy intumescent materials, high-viscosity coatings, fiber filled materialsReduced clogging means more productivity and uptime

$1,005.00

G40 Gun, Assembly, Aa, Rac Tip

GG 262929

G40 GUN, ASSY, AA, RAC TIP

Graco 262929 G40 Air-Assisted Airless Gun

Designed to maximize efficiency and quality, G40 air-assist spray guns use the highest quality components for long lasting reliable performance. The AAF tip line is designed for soft spray and improved transfer efficiency.

High quality air-assisted spraying in a variety of applications
All tips have a ring to retain the tip in the aircap
Designed to minimize wear of replacement parts
Trigger pull force is ultra-light, reducing operator fatigue and muscle stress

Model: G40

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Urethane, UV Coating, Varnish, Waterborne

Feed Type: Pressure Feed

Gun Activation: Manual
Gun Included: 1
Gun Type: Air-Assisted Gun
Gun Weight (g): 16
Gun Weight (oz): 16

Includes: RAC X FF LP Spray Tip

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 280
Maximum Fluid Pressure (kPa): 28000
Maximum Fluid Pressure (MPa): 28.0
Maximum Fluid Pressure (psi): 4000
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 110

Minimum Flow Rate @ PSI (oz/min): 5

Product Type: Spray Gun

$1,465.00

Kit, Pressure Monitor, Tp, Light

CONTRACTOR FLAT TIP, SPRAY 613

Graco 269613 Contractor Flat Tip, 613

The 613 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.013 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Architectural Coating

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.013

CONTRACTOR FLAT TIP, SPRAY

Graco 269725 Contractor Flat Tip, 725

The 725 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.025 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Architectural Coating

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.025

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$11.40

Contractor Flat Tip, Spray 819

GG 269819

CONTRACTOR FLAT TIP, SPRAY 819

Contractor Flat Tip, 819The 819 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.019 inch orifice.

$11.40

Contractor Flat Tip, Spray 721

GG 269721

CONTRACTOR FLAT TIP, SPRAY 721

Graco 269721 Contractor Flat Tip, 721

The 721 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.021 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Architectural Coating

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.021

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$11.40

Contractor Flat Tip, Spray

GG 269827

CONTRACTOR FLAT TIP, SPRAY

Contractor Flat Tip, 827The 827 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.027 inch orifice.

$11.40

Contractor Flat Tip, Spray 815

GG 269815

CONTRACTOR FLAT TIP, SPRAY 815

Graco 269815 Contractor Flat Tip, 815

The 815 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.015 inch orifice.

Model: Contractor
Series: Flat Tip

Compatible Material: Architectural Coating

For Use With: Silver Plus Airless Spray Gun

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 345
Maximum Working Pressure (kPa): 34500
Maximum Working Pressure (psi): 5000

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.015

$932.00

Control, System, Prodispense

GG 26A070

CONTROL, SYSTEM, PRODISPENSE

ProDispense Control Model Assembly, Base SystemThis cost-effective and user-friendly electronic system dispenses preset amounts of fluids.ProDispense allows durable goods manufacturers to quickly and accurately fill cavities with oil, grease, water, or other industrial fluids in assembly line environments, where accurate dispensing is essential.Control 2 fluid panels with this base system.Deliver up to 8 different fluids at multiple dispense points, and accurately measure volume.

$9,740.00

VALVE, 1/4 MNPT/S 316 SS BALL

GG 26A078

VALVE, 1/4 MNPT/S 316 SS BALL

$291.00

KIT, STATIC MIXER, ACID CAT

GG 26A079

KIT, STATIC MIXER, ACID CAT

$356.00

Kit, Seal, Ball, Pps

GG 26A083

Kit, Seal, Ball, Pps

$151.00

Meter, Gear, Assembly, G3000A

GG 26A119

METER,GEAR, ASSY, G3000A

Graco 26A119 G3000A High Pressure Fluid Meters, 0.02 to 1.0 gpm (75 to 3800 cc/min) flow range

$7,330.00

Body, Gearmeter, G3000A

GG 26A118

BODY,GEARMETER, G3000A

$5,630.00

Panel, Fluid, Oil/Lubricant

GG 26A129

PANEL, FLUID, OIL/LUBRICANT

ProDispense Fluid Panel Kit, Oil Meter, 10 wt oil to #2 greaseThis fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for oil and lubricant applications.For oil and lubricant applicatonsOil meter dispenses 10 wt oil to #2 grease.

$7,010.00