Airpower | GRACO INC. S10595 branded products

GG LTX413

RAC X LTX TIP, SPRAY, 413

Graco LTX413 RAC X SwitchTip, 413

The Reverse-A-Clean (RAC) 413 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Orifice Diameter (in): 0.013

$65.25

GG LTX417

RAC X LTX TIP, SPRAY, 417

Graco LTX417 RAC X SwitchTip, 417

The Reverse-A-Clean (RAC) 417 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Orifice Diameter (in): 0.017

$65.25

GG LTX425

RAC X LTX TIP, SPRAY, (425)

Graco LTX425 RAC X SwitchTip, 425

The Reverse-A-Clean (RAC) 425 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.025

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX423

RAC X LTX TIP, SPRAY, 423

Graco LTX423 RAC X SwitchTip, 423

The Reverse-A-Clean (RAC) 423 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.023

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX427

RAC X LTX TIP, SPRAY, (427)

Graco LTX427 RAC X SwitchTip, 427

The Reverse-A-Clean (RAC) 427 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.027

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX421

RAC X LTX TIP, SPRAY, 421

Graco LTX421 RAC X SwitchTip, 421

The Reverse-A-Clean (RAC) 421 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.021

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX431

RAC X LTX TIP, SPRAY, (431)

Graco LTX431 RAC X SwitchTip, 431

The Reverse-A-Clean (RAC) 431 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 1.03
Maximum Flow Rate (L/min): 3.90

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.031

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX419

RAC X LTX TIP, SPRAY, 419

Graco LTX419 RAC X SwitchTip, 419

The Reverse-A-Clean (RAC) 419 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.38
Maximum Flow Rate (L/min): 1.44

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.019

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX429

RAC X LTX TIP, SPRAY, LATEX, (429)

Graco LTX429 RAC X SwitchTip, 429

The Reverse-A-Clean (RAC) 429 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 0.90
Maximum Flow Rate (L/min): 3.41

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.029

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX433

RAC X LTX TIP, SPRAY, (433)

Graco LTX433 RAC X SwitchTip, 433

The Reverse-A-Clean (RAC) 433 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 1.17
Maximum Flow Rate (L/min): 4.43

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.033

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

G Tip, Spray, Latex, Rac X 545

GG LTX545

RAC X LTX TIP, SPRAY, (545)

Graco LTX545 RAC X SwitchTip, 545

The Reverse-A-Clean (RAC) 545 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.045 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 2.17
Maximum Flow Rate (L/min): 8.21

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.045

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GB Tip, Spray, Latex, Rac X 561

GG LTX561

RAC X LTX TIP, SPRAY, (561)

Graco LTX561 RAC X SwitchTip, 561

The Reverse-A-Clean (RAC) 561 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.061 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 4.00
Maximum Flow Rate (L/min): 15.14

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.061

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX521

RAC X LTX TIP, SPRAY, 521

Graco LTX521 RAC X SwitchTip, 521

The Reverse-A-Clean (RAC) 521 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.021

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX615

RAC X LTX TIP, SPRAY, 615

Graco LTX615 RAC X SwitchTip, 615

The Reverse-A-Clean (RAC) 615 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.24
Maximum Flow Rate (L/min): 0.91

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.015

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX537

RAC X LTX TIP, SPRAY, (537)

Graco LTX537 RAC X SwitchTip, 537

The Reverse-A-Clean (RAC) 537 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.037 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.47
Maximum Flow Rate (L/min): 5.56

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.037

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX611

RAC X LTX TIP, SPRAY, LATEX, (611)

Graco LTX611 RAC X SwitchTip, 611

The Reverse-A-Clean (RAC) 611 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.12
Maximum Flow Rate (L/min): 0.45

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.011

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX613

RAC X LTX TIP, SPRAY, LATEX, (613)

Graco LTX613 RAC X SwitchTip, 613

The Reverse-A-Clean (RAC) 613 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.18
Maximum Flow Rate (L/min): 0.68

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.013

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX539

RAC X LTX TIP, SPRAY, (539)

Graco LTX539 RAC X SwitchTip, 539

The Reverse-A-Clean (RAC) 539 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.039 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.63
Maximum Flow Rate (L/min): 6.17

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.039

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX527

RAC X LTX TIP, SPRAY, 527

Graco LTX527 RAC X SwitchTip, 527

The Reverse-A-Clean (RAC) 527 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.027

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX535

RAC X LTX TIP, SPRAY, 535

Graco LTX535 RAC X SwitchTip, 535

The Reverse-A-Clean (RAC) 535 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.035

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX523

RAC X LTX TIP, SPRAY, 523

Graco LTX523 RAC X SwitchTip, 523

The Reverse-A-Clean (RAC) 523 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.023

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX531

RAC X LTX TIP, SPRAY, 531

Graco LTX531 RAC X SwitchTip, 531

The Reverse-A-Clean (RAC) 531 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.03
Maximum Flow Rate (L/min): 3.90

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.031

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX435

RAC X LTX TIP, SPRAY, LATEX, (435)

Graco LTX435 RAC X SwitchTip, 435

The Reverse-A-Clean (RAC) 435 RAC X SwitchTip produces an 8 to 10 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 20
Maximum Fan Width (in): 8
Maximum Fan Width (mm): 254

Maximum Flow Rate (GPM): 1.31
Maximum Flow Rate (L/min): 4.96

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 8
Minimum Fan Width (mm): 203

Orifice Diameter (in): 0.035

Pattern Size (in): 8 to 10
Pattern Size (mm): 203.2 to 254

$65.25

GG LTX517

RAC X LTX TIP, SPRAY, 517

Graco LTX517 RAC X SwitchTip, 517

The Reverse-A-Clean (RAC) 517 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.017

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX515

RAC X LTX TIP, SPRAY, 515

Graco LTX515 RAC X SwitchTip, 515

The Reverse-A-Clean (RAC) 515 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.015 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.015

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX525

RAC X LTX TIP, SPRAY, 525

Graco LTX525 RAC X SwitchTip, 525

The Reverse-A-Clean (RAC) 525 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.025

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX509

RAC X LTX TIP, SPRAY, LATEX, (509)

Graco LTX509 RAC X SwitchTip, 509

The Reverse-A-Clean (RAC) 509 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.009 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.09
Maximum Flow Rate (L/min): 0.34

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.009

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX519

RAC X LTX TIP, SPRAY, 519

Graco LTX519 RAC X SwitchTip, 519

The Reverse-A-Clean (RAC) 519 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.019

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX541

RAC X LTX TIP, SPRAY, (541)

Graco LTX541 RAC X SwitchTip, 541

The Reverse-A-Clean (RAC) 541 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.041 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 1.80
Maximum Flow Rate (L/min): 6.81

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.041

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX511

RAC X LTX TIP, SPRAY, 511

Graco LTX511 RAC X SwitchTip, 511

The Reverse-A-Clean (RAC) 511 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 0.12
Maximum Flow Rate (L/min): 0.45

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.011

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX513

RAC X LTX TIP, SPRAY, 513

Graco LTX513 RAC X SwitchTip, 513

The Reverse-A-Clean (RAC) 513 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.013 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.013

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX619

RAC X LTX TIP, SPRAY, 619

Graco LTX619 RAC X SwitchTip, 619

The Reverse-A-Clean (RAC) 619 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.019

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX551

RAC X LTX TIP, SPRAY, (551)

Graco LTX551 RAC X SwitchTip, 551

The Reverse-A-Clean (RAC) 551 RAC X SwitchTip produces a 10 to 12 inch fan and has a 0.051 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 25
Maximum Fan Width (in): 10
Maximum Fan Width (mm): 305

Maximum Flow Rate (GPM): 2.79
Maximum Flow Rate (L/min): 10.56

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 10
Minimum Fan Width (mm): 254

Orifice Diameter (in): 0.051

Pattern Size (in): 10 to 12
Pattern Size (mm): 254 to 304.8

$65.25

GG LTX623

RAC X LTX TIP, SPRAY, 623

Graco LTX623 RAC X SwitchTip, 623

The Reverse-A-Clean (RAC) 623 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.023

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX617

RAC X LTX TIP, SPRAY, 617

Graco LTX617 RAC X SwitchTip, 617

The Reverse-A-Clean (RAC) 617 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.017

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX621

RAC X LTX TIP, SPRAY, 621

Graco LTX621 RAC X SwitchTip, 621

The Reverse-A-Clean (RAC) 621 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

For Use With: RAC X HandTite Tip Guard

Material: Tungsten Carbide

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.021

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX625

RAC X LTX TIP, SPRAY, 625

Graco LTX625 RAC X SwitchTip, 625

The Reverse-A-Clean (RAC) 625 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.67
Maximum Flow Rate (L/min): 2.54

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.025

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX631

RAC X LTX TIP, SPRAY, 631

Graco LTX631 RAC X SwitchTip, 631

The Reverse-A-Clean (RAC) 631 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 1.03
Maximum Flow Rate (L/min): 3.90

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.031

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX627

RAC X LTX TIP, SPRAY, 627

Graco LTX627 RAC X SwitchTip, 627

The Reverse-A-Clean (RAC) 627 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.027

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GB Tip, Spray, Latex, Rac X 645

GG LTX645

RAC X LTX TIP, SPRAY, (645)

Graco LTX645 RAC X SwitchTip, 645

The Reverse-A-Clean (RAC) 645 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.045 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 2.17
Maximum Flow Rate (L/min): 8.21

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.045

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GB TIp, Spray, Latex Rac X 641

GG LTX641

RAC X LTX TIP, SPRAY, (641)

Graco LTX641 RAC X SwitchTip, 641

The Reverse-A-Clean (RAC) 641 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.041 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 1.8
Maximum Flow Rate (L/min): 6.81

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.041

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX651

RAC X LTX TIP, SPRAY, (651)

Graco LTX651 RAC X SwitchTip, 651

The Reverse-A-Clean (RAC) 651 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.051 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 2.79
Maximum Flow Rate (L/min): 10.56

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.051

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GB Tip, Spray, Latex, Rac X 647

GG LTX647

RAC X LTX TIP, SPRAY, (647)

Graco LTX647 RAC X SwitchTip, 647

The Reverse-A-Clean (RAC) 647 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.047 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: Airless Spray Guns

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 2.37
Maximum Flow Rate (L/min): 8.97

Maximum Working Pressure (bar): 279
Maximum Working Pressure (kPa): 27900
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.047

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX655

RAC X LTX TIP, SPRAY, (655)

Graco LTX655 RAC X SwitchTip, 655

The Reverse-A-Clean (RAC) 655 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.055 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 30
Maximum Fan Width (in): 12
Maximum Fan Width (mm): 356

Maximum Flow Rate (GPM): 3.25
Maximum Flow Rate (L/min): 12.30

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 12
Minimum Fan Width (mm): 305

Orifice Diameter (in): 0.055

Pattern Size (in): 12 to 14
Pattern Size (mm): 304.8 to 355.6

$65.25

GG LTX721

RAC X LTX TIP, SPRAY, 721

Graco LTX721 RAC X SwitchTip, 721

The Reverse-A-Clean (RAC) 721 RAC X SwitchTip produces a 14 to 16 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.021

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$65.25

GG LTX723

RAC X LTX TIP, SPRAY, (723)

Graco LTX723 RAC X SwitchTip, 723

The Reverse-A-Clean (RAC) 723 RAC X SwitchTip produces a 14 to 16 inch fan and has a 0.023 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 35
Maximum Fan Width (in): 14
Maximum Fan Width (mm): 406

Maximum Flow Rate (GPM): 0.57
Maximum Flow Rate (L/min): 2.16

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 14
Minimum Fan Width (mm): 356

Orifice Diameter (in): 0.023

Pattern Size (in): 14 to 16
Pattern Size (mm): 355.6 to 406.4

$65.25

GG LTX817

RAC X LTX TIP, SPRAY, (817)

Graco LTX817 RAC X SwitchTip, 817

The Reverse-A-Clean (RAC) 817 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.31
Maximum Flow Rate (L/min): 1.17

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.017

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$65.25

GG LTX819

RAC X LTX TIP, SPRAY, (819)

Graco LTX819 RAC X SwitchTip, 819

The Reverse-A-Clean (RAC) 819 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.019 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.38
Maximum Flow Rate (L/min): 1.44

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.019

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$65.25

GG LTX821

RAC X LTX TIP, SPRAY, (821)

Graco LTX821 RAC X SwitchTip, 821

The Reverse-A-Clean (RAC) 821 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.021 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.47
Maximum Flow Rate (L/min): 1.78

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.021

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$65.25

GG LTX827

RAC X LTX TIP, SPRAY, (827)

Graco LTX827 RAC X SwitchTip, 827

The Reverse-A-Clean (RAC) 827 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.027 inch orifice. Reverse the SwitchTip to easily clear clogs.

Application: Used for residential, commercial or industrial applications.

Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
Easy to Identify Tip Size
Large raised tip size numbers are always legible - even when covered with paint
Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents

Model: RAC X
Series: LTX SwitchTip

Compatible Material: Lacquer to Mastic, Latex Paint

For Use With: RAC X HandTite Tip Guard

Maximum Fan Width (cm): 40
Maximum Fan Width (in): 16
Maximum Fan Width (mm): 457

Maximum Flow Rate (GPM): 0.77
Maximum Flow Rate (L/min): 2.91

Maximum Working Pressure (bar): 280
Maximum Working Pressure (kPa): 28000
Maximum Working Pressure (psi): 4050

Minimum Fan Width (in): 16
Minimum Fan Width (mm): 406

Orifice Diameter (in): 0.027

Pattern Size (in): 16 to 18
Pattern Size (mm): 406.4 to 457.2

$65.25

GG LW075A

KIT, LOWER,75CC ASSY

Graco LW075A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 75 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$2,730.00

GG LW100A

KIT, LOWER,100CC ASSY

Graco LW100A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 100 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$2,970.00

GG LW125A

KIT, LOWER,125CC ASSY

Graco LW125A Merkur Wet-Cup Style Stainless Steel Displacement Pump, 125 cc, Chromex coated rod and 3 UHMWPE, 2 PTFE packings

$3,420.00

GG M0450

Seat, Hex Oring

$350.00

GG M0454-2

Locknut

$180.00

Nozzle, Body, Ballnose, .078, XSH

GG M0663001

Nozzle, Body, Ballnose, .078, XSH

$2,250.00

GG M0663002

Jacket, Water, Super Short

$1,175.00

GG M0663003

Needle, Nozzle Pin, 3.78 LG

$230.00

GG M24022

Cable, Sensor Cable Assembly

$865.00

GG M1051-1

Nozzle Grip, L

$4,240.00

GG M70424

Gasket, 1 Qt. Cup

$7.30

Check Valve Assembly, Medical, 3/4" Nptf

GG M2-7M

Check Valve Assembly, Medical, 3/4" Nptf

$320.00

GG M70430

Screw, SS, Cup 1/4-28.19

$4.35

Proportioner, Sys, Pd1K, Manual, Dp

GG MC0502

PROMIX PD2K PROPORTIONER, SYS, PD1K, MANUAL, DP

Graco MC0502 ProMix PD2K Manual Proportioner, Dual Panel, Control Module Only

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Applicator Type: Manual

Component Type: Single Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Single Component

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 16

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter

Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: Up to 4
Number of Color Valves: N/A

Number of Resin Colors: Up to 30

Power Source: Electric

Pressure Type: Low or High Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$27,630.00

Mbl Lubricator, Gbl

GG MBC2EA

Mbl Lubricator, Gbl

$4,300.00

Proportioner, Syst, PD, Manual, LP

GG MC1000

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, LP

Graco MC1000 ProMix PD2K Manual Proportioner, Standard, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 1 Solvent Valve

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Applicator Type: Manual

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Plural Component

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 30

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter

Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: Up to 4
Number of Color Valves: N/A

Number of Resin Colors: Up to 30

Power Source: Electric

Pressure Type: Low Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$54,960.00

Proportioner, Sys, PD2K DP, Manual, LP

GG MC1002

PROMIX PD2K PROPORTIONER, SYS, DP, MANUAL, LP

Graco MC1002 ProMix PD2K Manual Proportioner, Dual Panel, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 2 Solvent Valves

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Applicator Type: Manual

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Plural Component

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 16

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter

Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: Up to 4
Number of Color Valves: N/A

Number of Resin Colors: Up to 30

Power Source: Electric

Pressure Type: Low Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,420.00

ProMix PD2K, Air Assist (non acid)

GG MC2000

PROMIX PD2K PROPORTIONER, SYSTEM, PD, MANUAL, HP

Graco MC2000 ProMix PD2K Manual Proportioner, Standard, High Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump, 1 Solvent Valve

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Applicator Type: Manual

Component Type: Two Component

Flush Type: Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Plural Component

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 30

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter

Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: Up to 4
Number of Color Valves: N/A

Number of Resin Colors: Up to 30

Power Source: Electric

Pressure Type: High Pressure
Proportioner Type: Manual
Proportioning Type: Manual Electronic

$58,880.00

PROPORTIONER, 2KS G3000, 1 COLOR, 1 CAT, 1 AFS

GG MD1001

PROMIX 2KS PROPORTIONER, MANUAL SYSTEM

Graco MD1001 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 1 color, 1 catalyst, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1

Number of Resin Colors: 1

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$46,580.00

PROPORTIONER, 2KS G3000, 1 COLOR, 1 CAT, 2 AFS

GG MD1002

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1002 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 1 color, 1 catalyst, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1

Number of Resin Colors: 1

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$48,220.00

PROPORTIONER, 2KS G3000, 1 COLOR, 1 CAT, 1 AFS, 1 GFB

GG MD1003

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1003 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, Single Color, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1

Number of Resin Colors: 1

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$55,530.00

PROPORTIONER, 2KS G3000, 1 COLOR, 1 CAT, 2 AFS, 2 GFB

GG MD1004

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1004 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 1 Color, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 1 Valve
Number of Colors: 1

Number of Resin Colors: 1

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,010.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 1 CAT, 1 AFS

GG MD1101

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1101 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 1 catalyst, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$55,920.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 1 CAT, 2 AFS

GG MD1102

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1102 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 1 catalyst, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$56,770.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 1 CAT, 2 AFS, 2 GFB

GG MD1104

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1104 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$69,420.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 2 CAT LP, 1 AFS

GG MD1111

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1111 ProMix 2KS Manual Wall Panel System, EasyKey with LCD display, G3000 A & B Meter, 2 colors LP, 2 catalysts LP, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$66,370.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 2 CAT LP, 1 AFS, 1GFB

GG MD1113

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1113 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 2 Colors LP, 2 Catalysts LP, 1 Air Flow Switch with 1 Gun Flush Box

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$74,670.00

PROPORTIONER, 2KS G3000, 2 COLOR LP, 2 CAT LP, 2 AFS, 2 GFB

GG MD1114

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1114 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors LP, 2 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$81,790.00

PROPORTIONER, 2KS G3000, 4 COLOR LP, 1 CAT LP, 2 AFS

GG MD1202

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1202 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 1 catalyst, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$62,160.00

PROPORTIONER, 2KS G3000, 4 COLOR LP, 1 CAT LP, 1 AFS

GG MD1201

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1201 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 1 catalyst, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,020.00

Proportioner, Manual, ProMix 2KS

GG MD1203

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1203 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 4 Colors LP, Single Catalyst, 1 Air Flow Switch with 1 Gun Flush Box

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$68,930.00

PROPORTIONER, 2KS G3000, 4 COLOR LP, 1 CAT LP, 2 AFS, 2 GFB

GG MD1204

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1204 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 4 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$75,670.00

PROMIX 2KS PROPORTIONER MANUAL

GG MD1212

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1212 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 4 colors LP, 2 catalysts LP, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$73,280.00

ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors HP, 1 Catalyst, 2 Air Flow Switch

GG MD1504

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1504 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 2 Colors HP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$72,550.00

PROPORTIONER, MANUAL PROMIX 2KS

GG MD1214

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1214 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 4 Colors LP, 2 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$83,300.00

PROMIX 2KS MANUAL WALL PANEL SYS G 3000 A & B METER 4 COLOR

GG MD1633

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1633 ProMix 2KS Manual Wall Panel System, EasyKey, G3000 A & B Meter, 4 Colors HP, 2 Catalysts HP, 1 Air Flow Switch with 1 Gun Flush Box

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$78,720.00

PROPORTIONER, 2KS G3000, 12 COLOR LP, 4 CAT LP, 2 AFS, 2 GFB

GG MD1424

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

Graco MD1424 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 12 Colors LP, 4 Catalysts LP, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 4
Number of Color Valves: 12 Valves
Number of Colors: 12

Number of Resin Colors: 12

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$109,860.00

PROPORTIONER, 2KS G3000A, 0 COLOR, 0 CAT, 1 AFS

GG ME1001

PROMIX 2KS PROPORTIONER MANUAL SYSTEM

Graco ME1001 ProMix 2KS Manual System for Acid Cat with G3000A Meter, 1 Airflow Switch, EasyKey Smart Control and Display

The ProMix 2KS meter-based dosing system for acid catalyzed materials can track the performance of one or two painters and manage a wide range of mix ratios. It's also easy to set up and manage without touchy adjustments to fluid pressure.

The G3000A meter accurately measures fluid and withstands strong acid due to durable, high grade, stainless steel components, including gears with ceramic bearings.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: No Valves
Number of Colors: 1

Number of Resin Colors: 0

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$52,950.00

PROPORTIONER MANUAL PROMIX 2KS

GG ME1004

PROMIX 2KS PROPORTIONER MANUAL

Graco ME1004 ProMix 2KS Manual System for Acid Cat with G3000A Meter, 2 Gun Flush Boxes, EasyKey Smart Control and Display

The ProMix 2KS meter-based dosing system for acid catalyzed materials can track the performance of one or two painters and manage a wide range of mix ratios. It's also easy to set up and manage without touchy adjustments to fluid pressure.

The G3000A meter accurately measures fluid and withstands strong acid due to durable, high grade, stainless steel components, including gears with ceramic bearings.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: No Valves
Number of Colors: 1

Number of Resin Colors: 0

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$72,780.00

Seat Valve Rebuild Kit

GG MK30077

Seat Valve Rebuild Kit

$280.00

Proximity Switch

GG MS4086

Proximity Switch

$5,190.00

PROPORTIONER, 2KS G3000, 2 COLOR HP, 1 CAT, 1 AFS

GG MD1501

PROMIX 2KS PROPORTIONER, MANUAL

Graco MD1501 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 2 colors HP, 1 catalyst, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 2 Valves
Number of Colors: 2

Number of Resin Colors: 2

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$61,160.00

PROPORTIONER, 2KS G3000, 4 COLOR HP, 1 CAT HP, 2 AFS, 2GFB

GG MD1631

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1631 ProMix 2KS Manual Wall Panel System, EasyKey with LCD display, G3000 A & B Meter, 4 colors HP, 2 catalysts HP, and 1 Air Flow Switch

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 2
Number of Color Valves: 4 Valves
Number of Colors: 4

Number of Resin Colors: 4

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$71,380.00

Motor, Air, 6500, Low Noise Std

GG N65LN0

Motor, Air, 6500, Low Noise Std

$8,730.00

Motor, 6500, Low-Noise, Remote

GG N65LR0

Motor, 6500, Low-Noise, Remote

$9,030.00

Kit Nozzle

GG NK-32-125

KIT,NOZZLE,6ST,125,WC,SB

Graco NK-32-125 Advanjet Nozzle Kit with 125 small ball carbide 6 mm nozzle

Compatible Material: Waterborne, Solventborne

$750.00

Kit Nozzle

GG NK-32-200

KIT,NOZZLE,6ST,200,WC,SB

Graco NK-32-200 Advanjet Nozzle Kit with 200 small ball carbide 6 mm nozzle

$750.00

Kit, O-Ring, Plt, Sil, 10/Pk

GG NP09-2820

Kit, O-Ring, Plt, Sil, 10/Pk

$75.00

PROPORTIONER, 2KS G3000, 12 COLOR LP, 4 CAT LP, 2 AFS

GG MD1422

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1422 ProMix 2KS Manual Wall Panel, EasyKey with LCD display, G3000 A & B Meter, 12 colors LP, 4 catalysts LP, and 2 Air Flow Switches

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.635
Fluid Outlet Size (in): 1/4
Fluid Outlet Size (mm): 6.35
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 4
Number of Color Valves: 12 Valves
Number of Colors: 12

Number of Resin Colors: 12

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$95,630.00

PROPORTIONER, 2KS G3000, 7 COLOR LP, 1 CAT, 2 AFS, 2 GFB

GG MD1304

PROMIX 2KS PROPORTIONER MANUAL

Graco MD1304 ProMix 2KS Manual Wall Panel, EasyKey, G3000 A & B Meter, 7 Colors LP, 1 Catalyst, 2 Air Flow Switches, 2 Gun Flush Boxes

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Manual systems benefit from an additional Remote Operator Station that allows fingertip control inside the spray booth.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Amperage (A): 2
Applicator Type: Manual

Component Type: Two Component

Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent

Frequency (Hz): 50/60

Gun Activation: Manual

Material Type: Two Component

Maximum Flow Rate (cc/min): 3790

Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79

Maximum Fluid Viscosity (cP): 3000

Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12

Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000

Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075

Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1

Mix Accuracy (%): 1

Number of Catalysts: 1
Number of Color Valves: 7 Valves
Number of Colors: 7

Number of Resin Colors: 7

Power Source: Electric

Proportioner Type: Manual
Proportioning Type: Manual Electronic

$82,430.00