GRACO INC. S10595

GG 24P196

GG 24P195

GG 24N781

KIT, NEEDLE, FLUID, AA, 85KV

Graco 24N781 Pro Xp Air-Assisted Gun Fluid Needle Kit

• Coating Type: Standard

• Compatible Paint Type: Epoxy, High Solids, Lacquers, Plural Component Materials, Polyurethanes, Solventborne, Urethanes, UV Curing, Varnishes

GG 24N783

GG 24P728

GG 24P744

GG 24N785

GG 24N786

GG 24P623

GG 24P684

GG 24P785

GG 24P821

GG 24N978

KIT, CONVERTER FO

Graco 24N978 Fiber Optic to Serial Converter, communicate from the Informer to a PLC

Use to communicate from a Display Control Module (DCM) or Advanced Display Control Module (ADCM) to a Non-Graco Programmable Logic Controller (PLC) or an Advanced Web Interface (AWI)

GG 24N979

GG 24V254

GG 24V312

ELEVATOR, SANITARY, MOBILE, 6:1

Graco 24V312 6:1 Ratio SaniForce Elevator with Cart & Handle

Still using hoists and chains to unload your drums or bins? Gracos SaniForce Elevator is ideal for small to medium size food and personal care companies who currently unload less than 2 containers per hour. Use with Gracos SaniForce 2:1, 5:1 or 6:1 Piston Pumps to transfer small batches of low to medium viscosity fluids.

• FDA-compliant
• Use in sanitary applications to transfer low to medium viscosity fluids
• Designed to lower pumps into and lift pumps out of drums, bins and totes
• Mobile and stationary options available

• Model: SaniForce

• Air Inlet Size (in): 0.5
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Sanitary

• Compatible Material: Food, Personal Care

• For Use With: Food, Personal Care, Pharmaceutical

• Includes: Cart and Handle

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Continuous Cycle Rate (CPM): 60

• Maximum Intermittent Cycle Rate (CPM): 60

• Maximum Working Pressure (bar): 41
• Maximum Working Pressure (kPa): 4100
• Maximum Working Pressure (MPa): 4.1
• Maximum Working Pressure (psi): 600

• Portable: Portable

• Pump Ratio: 6:1

GG 24V633

PLATE,FOLLOWER,MEGA,TOF200

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC

GG 24V753

KIT, SEAL, PUMP, GLASS FILLED

KIT INCLUDES: WASHER, SEAL, BACK-UP [QTY. 1], PACKING, U-CUP [QTY. 2], WASHER, SCRAPER [QTY. 1], NUT, PACKING [QTY. 1], WASHER, ROD, SCRAPER [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], LUBRICANT, TUBE, 1 OZ [QTY. 1]

GG 24V436

KIT, MANIFOLD, MIX, REMOTE

Graco 24V436 Remote Mix Manifold for PD2K & PD3K

GG 24V510

KIT, REPAIR, MZLP W/FUSES

Graco 24V510 MZLP Repair Kit with Fuses

KIT INCLUDES: MODULE, GCA, MZLP [QTY. 1], LABEL, IDENTIFICATION [QTY. 1], SOFTWARE, GCA, MZLP, APP [QTY. 1], FLASH DRIVE, USB, 2.0 [QTY. 1]

GG 24X167

LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS

Graco 24X167 1:1 Ratio 55 gal (200 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

• Precise ratio control, minimal material waste

  The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.

  The result: More precise mixing, a better end product and less wasted material.

  • Easier operation with Graco Control Architecture

    The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

    • Better Color Control

      Mix two additive streams at ratios ranging from 0.5 to 6%

      • Maintains Material Integrity

        Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

        • Cleanroom Convenience

          A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

          
          

          • Model: LSR
          • Air Inlet Size (cm): 1.27
          • Air Inlet Size (in): 1/2
          • Air Inlet Size (mm): 12.7
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Amperage (A): 4
          • Applicator Type: Automatic
          • Frequency (Hz): 50/60
          • Maximum Flow Rate (kg/min): 2.27
          • Maximum Flow Rate (lb/min): 5
          • Maximum Working Pressure (bar): 207
          • Maximum Working Pressure (kPa): 20700
          • Maximum Working Pressure (MPa): 21
          • Maximum Working Pressure (psi): 3000
          • Minimum Flow Rate (GPM): 10

GG 24X166

LSR F4-55-5 SYSTEM, LSR55-5GAL/55-5GAL, CSTERS

Graco 24X166 1:1 Ratio 5 gal (20 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

• Precise ratio control, minimal material waste

  The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.

  The result: More precise mixing, a better end product and less wasted material.

  • Easier operation with Graco Control Architecture

    The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

    • Better Color Control

      Mix two additive streams at ratios ranging from 0.5 to 6%

      • Maintains Material Integrity

        Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

        • Cleanroom Convenience

          A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

          
          

          • Model: LSR
          • Air Inlet Size (cm): 1.27
          • Air Inlet Size (in): 1/2
          • Air Inlet Size (mm): 12.7
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Amperage (A): 4
          • Applicator Type: Automatic
          • Frequency (Hz): 50/60
          • Maximum Flow Rate (kg/min): 2.27
          • Maximum Flow Rate (lb/min): 5
          • Maximum Working Pressure (bar): 207
          • Maximum Working Pressure (kPa): 20700
          • Maximum Working Pressure (MPa): 21
          • Maximum Working Pressure (psi): 3000
          • Minimum Flow Rate (GPM): 10

GG 24W349

ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, ADV

Graco 24W349 Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT, DataTrak

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
• DataTrek option prevents runaway and tracks material usage

• Model: Endura-Flo
• Series: 4D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings, DataTrak

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Power Source: Air

• Pump Ratio: 4:1

GG 24W351

ENDURA-FLO PUMP, 4:1 AODD, 350, TRI, STD

Graco 24W351 Endura-Flo 4D350, 4:1 Air Operated Diaphragm Pump, 350cc, Tri-Clamp

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 4D350

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Tri-Clamp

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4

• Includes: Tri-Clamp Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 5.5
• Maximum Flow Rate (L/min): 20.8

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 14.39

• Power Source: Air

• Pump Ratio: 4:1

GG 24Y212

DURA-FLO XL PUMP, 47:1, (18 CM CSTL)

Graco 24Y212 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Right Hand Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• XL 1000 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 430cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  
  

  • Model: Dura-Flo
  • Series: XL 1800
  • Air Inlet Size (in): 1
  • Air Inlet Size (mm): 25.4
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  • Fluid Outlet Size (in): 1-1/2
  • Fluid Outlet Size (mm): 38.1
  • Fluid Outlet Thread Gender: Male
  • Fluid Outlet Thread Type: NPT
  • Material: Carbon Steel
  • Maximum Air Inlet Pressure (bar): 6.9
  • Maximum Air Inlet Pressure (kPa): 690
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Continuous Cycle Rate (CPM): 60
  • Maximum Flow Rate (GPM): 6.9
  • Maximum Flow Rate (L/min): 26.12
  • Maximum Operating Temperature ( degree C): 66
  • Maximum Operating Temperature ( degree F): 150
  • Maximum Working Pressure (bar): 310
  • Maximum Working Pressure (kPa): 31000
  • Maximum Working Pressure (MPa): 31
  • Maximum Working Pressure (psi): 4500
  • Portable: Non-Portable
  • Power Type: Pneumatic
  • Pump Ratio: 47:1

GG 24Y211

DURA-FLO 1800 PUMP, XL, 47:1, (18 CM CSTL)

Graco 24Y211 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Long Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• XL 1000 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 430cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  
  

  • Air Inlet Size (in): 1
  • Air Inlet Size (mm): 25.4
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  • Fluid Outlet Size (in): 1-1/2
  • Fluid Outlet Size (mm): 38.1
  • Fluid Outlet Thread Gender: Male
  • Fluid Outlet Thread Type: NPT
  • Material: Carbon Steel
  • Maximum Air Inlet Pressure (bar): 6.9
  • Maximum Air Inlet Pressure (kPa): 690
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Continuous Cycle Rate (CPM): 60
  • Maximum Flow Rate (GPM): 6.9
  • Maximum Flow Rate (L/min): 26.12
  • Maximum Operating Temperature ( degree C): 66
  • Maximum Operating Temperature ( degree F): 150
  • Maximum Working Pressure (bar): 310
  • Maximum Working Pressure (kPa): 31000
  • Maximum Working Pressure (MPa): 31
  • Maximum Working Pressure (psi): 4500
  • Portable: Non-Portable
  • Power Type: Pneumatic
  • Pump Ratio: 47:1

GG 24Y263

GG 24Y264

GG 24Y307

KIT, CONTROLLER, SOLVENT-BORNE

Graco 24Y307 Pro Xpc Auto Controller, Solventborne

GG 24Y306

GG 24Y262

GG 24Y245

GG 24Y343

GG 24Y400

GG 24X890

GG 24Y101

GG 24X882

GG 24X886

GG 24Y404

GG 24Y403

GG 24W346

ENDURA-FLO PUMP, 4:1 AODD, 150, NPT, STD

Graco 24W346 Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, NPT

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 4D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: NPT

• Includes: NPT Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 12.23

• Power Source: Air

• Pump Ratio: 4:1

GG 24W347

ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, STD

Graco 24W347 Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, BSPP

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 4D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Threaded

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: BSPP

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: BSPP

• Includes: BSPP Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 12.23

• Power Source: Air

• Pump Ratio: 4:1

GG 24X427

CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO

Graco 24X427 ChemSafe 307 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port

Gracos ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. Theres no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus theyre dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 7.9 gpm (30 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 307

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 9.3
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 610

• Maximum Flow Rate (GPM): 6.7
• Maximum Flow Rate (L/min): 25.4

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 0.2
• Maximum Solid Size (in): 0.08
• Maximum Solid Size (mm): 2

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X482

GG 24W345

ENDURA-FLO PUMP, 4:1 AODD, 150, TRI, STD

Graco 24W345 Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, Tri-Clamp

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

• Endure-Flo diaphragms last longer against extreme operating conditions
• Easy access to critical components for fast online maintenance
• Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
• Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges

• Model: Endura-Flo
• Series: 4D150

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Circulation

• Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

• Connection Type: Tri-Clamp

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4

• Includes: Tri-Clamp Fittings

• Material: Stainless Steel

• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 20

• Maximum Flow Rate (GPM): 2.4
• Maximum Flow Rate (L/min): 9.1

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Fluid Pressure (bar): 28
• Maximum Fluid Pressure (kPa): 2800
• Maximum Fluid Pressure (MPa): 2.8
• Maximum Fluid Pressure (psi): 400

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Overall Height (in): 12.23

• Power Source: Air

• Pump Ratio: 4:1

GG 24W310

GG 24X003

GG 24X004

GG 24X089

KIT, PRESSURE, SENSOR, SANITARY

GG 24X056

GG 24W651

SENSOR, ASSEMBLY, G250/G3000

Graco 24W651 Electronic Sensor, G250/G3000

GG 24W994

GG 24X384

GG 24X350

GG 24X284

GG 24X345

GG 24X557

GG 24X558

GG 24X026

GG 24X055

GG 24Y240

REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT

Graco 24Y240 50 ft x 3/8 in Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life
      • Resistance Temperature Detector (RTD)

        Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

        
        

        • Model: Reactor 2
        • Series: Xtreme Wrap
        • Compatible Sprayer: Reactor 2
        • For Use With: Plural Component Proportioners
        • Hose Heating Type: External Heated
        • Hose Inside Diameter (in): 3/8
        • Hose Inside Diameter (mm): 9.525
        • Hose Length (ft): 50
        • Hose Length (m): 15.2
        • Inside Diameter (in): 3/8
        • Maximum Working Pressure (bar): 138
        • Maximum Working Pressure (kPa): 13800
        • Maximum Working Pressure (MPa): 13.8
        • Maximum Working Pressure (psi): 2000

GG 24Y241

REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT

Graco 24Y241 50 ft x 3/8 in Heated Hose, 3500 psi, RTD, Xtreme-Wrap, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life
      • Resistance Temperature Detector (RTD)

        Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

        
        

        • Model: Reactor 2
        • Series: Xtreme Wrap
        • Compatible Sprayer: Reactor 2
        • For Use With: Plural Component Proportioners
        • Hose Heating Type: External Heated
        • Hose Inside Diameter (in): 3/8
        • Hose Inside Diameter (mm): 9.525
        • Hose Length (ft): 50
        • Hose Length (m): 15.2
        • Inside Diameter (in): 3/8
        • Maximum Working Pressure (bar): 241
        • Maximum Working Pressure (kPa): 24100
        • Maximum Working Pressure (MPa): 24.1
        • Maximum Working Pressure (psi): 3500

GG 24Y678

REACTOR HEATED HOSE, X-WRAP, 3/8, 50'

Graco 24Y678 50 ft x 3/8 in Heated Hose, 2000 psi, Thermocouple, Xtreme-Wrap, Reactor 1

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life

      
      

      • Model: Reactor 1
      • Series: Xtreme Wrap
      • Compatible Sprayer: Reactor 1
      • For Use With: Plural Component Proportioners
      • Hose Heating Type: External Heated
      • Hose Inside Diameter (in): 3/8
      • Hose Inside Diameter (mm): 9.525
      • Hose Length (ft): 50
      • Hose Length (m): 15.2
      • Inside Diameter (in): 3/8
      • Maximum Working Pressure (bar): 138
      • Maximum Working Pressure (kPa): 13800
      • Maximum Working Pressure (MPa): 13.8
      • Maximum Working Pressure (psi): 2000

GG 24Y769

GG 24Y937

MANIFOLD,ASSY,CC,2 VALVE,LP,CIRC

Graco 24Y937 2 Valve SST Low Pressure Circulating Valve

Low Pressure Non-Circulating Valve

• Compatible Material: CARC, High Solids, Metallics, Solventborne, Stains, Topcoats, Varnish, Waterborne, Xirallic

GG 24Y936

MANIFOLD, ASSY, CC, 2 VALVE, LP

Graco 24Y936 2 Valve SST Low Pressure Non-Circulating Valve

Low Pressure Non-Circulating Valve

GG 24Y548

GG 24Y634

GG 24Y850

GG 24Y835

GG 24Y434

GG 24Y546

GG 24Y807

GG 24Y820

GG 24Y771

GG 24Y772

GG 24Y651

KIT, THROAT CARTRIDGE

GG 24Y670

KIT, THROAT CARTRIDGE, 70CC

GG 24Y778

KIT,MODULE,GCA,MCM,SALEABLE

KIT INCLUDES: MODULE, GCA, MCM [QTY. 1], KIT INCLUDES: HEAD, RATIO, CATALYST [QTY. 1], KIT, AIR CAP, INTERNAL MIX [QTY. 1], RING, LOCKING [QTY. 1], SEAL, RATIO, CATALYST [QTY. 1], FITTING, 1/8 NPT X 1/4 TUBE, SS [QTY. 1], HOSE, TUBNG, P.E., .250OD NATURA [QTY. 2]

GG 24Y773

GG 24W396

GG 24W401

GL-33 INJECTOR, GREASE, CS

Graco 24W401 GL-33 Grease Injector, Carbon Steel, 1 Injector Manifold, 1/8 NPT

Choose durable, long-lasting Graco injectors to perform your lubrication automatically and minimize downtime and maintenance costs. Graco's GL-33 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system.

• Seven outlet fitting sizes available
• Convenient front-mounted visual indicator pin
• One-Piece, Machined Body provides exceptional durability
• Precision-honed components for reliable operation in challenging environments
• Adjustable output volume from 0.001 - 0.003 in cu (0.02 - 0.05 cm cu )
• Operating pressures from 1200-3500 psi (83-241 bar) for optimal performance with up to NLGI #2 grease
• Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

• Model: GL-33
• Adjustable: Adjustable

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel

• Cycle Indicator: Visual Pin

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Gender: Female
• Inlet Thread Type: NPT

• Material: Carbon Steel

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 84
• Minimum Working Pressure (kPa): 8400
• Minimum Working Pressure (MPa): 8.4

• Minimum Working Pressure (psi): 1200

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPT

GG 24W599

GG 24W617

KIT, REPLACEMENT, PISTON ROD, PC

Graco 24W617 ProConnect Replacement Rod Paint Sprayer Pump Kit for Pro210ES

Replace your pump rod with genuine Graco parts.Replacement part for rebuilding ProConnect pump. kit includes rod with installed piston valve. ProConnect pump is for Pro 210ES cart or stand model sprayers. Refer to the parts manual for your sprayer to ensure part compatibility

• Rod and piston are part of the sprayer pump for pumping fluid
• Sprayer does not prime or spray, it may be from high pressure cuts, scratches and wear from not repacking the pump
• Graco tech support can further assist with troubleshooting sprayer operation
• Genuine Graco parts kit includes rod with installed piston valve

• For Use With: Pro210ES Stand, Pro210ES Cart

GG 24W830

KIT, REPLACEMENT, HOSE, CPLD, QD

Graco 24W830 Hose Replacement Kit

Piston pump to filter manifold hose, 1/4QD

• Piston pump to filter manifold hose

GG 24W870

GG 24W619

KIT, REPLACEMENT, CYLINDER, PC

Graco 24W619 Pump Cylinder

Airless Priston Pump Replacement Cylinder

• Pump Cylinder

GG 24W650

GG 24W161

GG 24W182

GG 24W589

GG 24W479

GG 24W920

GG 24W988

KIT, BELL ASSY TURBINE

GG 24W812

GG 24W814

GG 24W829

GG 24W815

GG 24W913

KIT, OVERHAUL, CS, GL-33

Graco 24W913 GL-33 and GL-42 Injectors and Accessories - GL33 Overhaul Kit, Carbon Steel

• GL33 overhaul kit, carbon steel

• For Use With: GL-33 Grease Injectors

• Includes: GL-33 Piston, Lubricant, Hardware

• Kit Type: Overhaul Kit

• Number of Pieces: 9

GG 24W881