GRACO INC. S10595

GG 563906

KIT, REPAIR PUMP HL-25M

HL-25M seal kit

GG 563918

GG 563909

KIT, REPAIR PUMP E-SERIES

Pump Repair Kit (fixed output)

GG 563923

GG 563928

KIT, REPAIRI ND CYCLE MSP

MSP cycle pin indicator repair kit, gasket

GG 563929

KIT, REPAIR IND CYC

MSP cycle pin indicator repair kit, O-ring

GG 563962

KIT, BURST DISK 1450 PS1 YELLOW 6PK

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Packs of 6 (11/16 inch / 17.5 mm diameter discs)

1,450 psi - yellow

GG 563963

KIT, BURST DISK 1750 RED 6PK

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Packs of 6 (11/16 inch / 17.5 mm diameter discs)

1,750 psi - red

GG 563966

KIT, BURST DISK 2950 BLUE 6PK

Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.

Requires replacement of the rupture disc to restart the lube system.

Easy information on blocked lines, high system pressure or blocked bearings.

Replacement Rupture Packs of 6 (11/16 inch / 17.5 mm diameter discs)

2,940 psi - blue

GG 564086

GG 564350

SWIVEL, BEARING, 90DEG, 1/2 NPT

90º Angle Swivel - 1/2 inch (12.7 mm)

GG 567251

GG 564406

FILTER, 138 MIC INLINE 1/4-19 BSPP

149 micron, 100 Mesh In-Line Block Strainer, BSPP (ISO 1179)

GG 564413

MINI METER-FLO PUMP, MOTOR ASSY 5CU/IN

Designed for use with virtually any type of Series Progressive or Single Line Resistive oil lubrication system. The Miniature Meter-Flo has a rugged steel reservoir and motor assembly withstands the toughest applications.

Capable of high volumetric output operating continuously at pressures up to 1,000 psi (69 bar)

Compact with several options to create a complete system using feedback and control

Nominal displacements of 5 cu. in./min. (82 cc/mm.)

An adjustable internal relief protects pump from excessive pressures. Factory set at 1,000 psi (69 bar)

Pump, Gear motor and Reducer assembly - no reservoir

Reservoir has a suction line strainer, return line port, visual level gauge, pressure gauge and filler/strainer with spring return cap

Options include low level switch, high pressure indicator, and lube cycle timer

GG 570267

GG 570268

KIT, REBUILT POLYMITE

Graco 570268 1K Ultra-Lite Valve Rebuild Kit

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 1], GASKET, SEAT [QTY. 1], SEAT, VALVE [QTY. 1], BEARING, SLEEVE 1/4, 3/8, 1/4NYL [QTY. 2], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1], SEAL, U-CUP POLYMT 1/4, 1/2, 1/4 [QTY. 1], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 1], PIN, DOWEL [QTY. 1], GASKET, AIR MANIFOLD [QTY. 1], INSERT, SUFF-BACK, 2K2 [QTY. 1], NEEDLE, 2K2 SST HARDENED [QTY. 1], BEARING, LUBE 2K2 [QTY. 1], PACKING, O-RING [QTY. 2]

GG 571028

KIT, ACC, ADJ PRESSURE RELIEF

GG 571033

KIT, REMOTE MAN RUN, 24V, W/CABLE

Remote manual monitoring light run kit–24 VDC, 90-240 VAC, includes 16 foot M12 cable

GG 571041

KIT, ACC, PUMP ELEMENT

G3 pump element–the same adjustability as the pump included with G3

GG 598141

GG 571167

ADAPTER, OUTLET TO HAND PUMP

GG 5-729-300-2.5LM

GG 575206

XP SYSTEM, 2:1, 180/90, COMPLETE, HAZ

Graco 575206 XP50 Cart System, Hazardous Location, 2:1 With Primary Heaters & Hose Heat, 240V

Two-component spraying made easy and affordable. Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. When you upgrade from hand mixing, you'll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate - choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That's because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 5000 psi (345 bar) to handle viscous materials and long hose lengths

• Series: XP50

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: With Primary Heaters & Hose Heat

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: 7 Gallon Hoppers, XTR+ Gun, 35 ft integration Hose and Static Mixer, Merkur Flush Pump, Viscon HP Heaters, Hose Heat Circulation Kit, Remote Carriage, PressureTrak

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 60 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10970

• Maximum Flow Rate (GPM): 2.9
• Maximum Flow Rate (L/min): 10.97

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Spray Pressure (bar): 344

• Maximum Spray Pressure (kPa): 34400
• Maximum Spray Pressure (MPa): 34
• Maximum Spray Pressure (psi): 5000

• Maximum Working Pressure (bar): 331
• Maximum Working Pressure (kPa): 33100
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4800
• Measurin

GG 626708

GG 647000

HUSKY PUMP, 1050A-PA01AA1PPTPTPPT

Graco 647000 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, TPE Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: TPE (Hytrel)
          • Center Section Material: Aluminum
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Threaded
          • Diaphragm Compatible Material: TPE
          • Diaphragm Material: TPE (Hytrel)
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Inlet Thread Gender: Female
          • Fluid Inlet Thread Type: NPT
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Outlet Thread Gender: Female
          • Fluid Outlet Thread Type: NPT
          • Fluid Section Material: Aluminum
          • Manifold Configuration: Center Port, End Port
          • Manifold O-Ring Material: PTFE
          • Material: Aluminum
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 647018

HUSKY PUMP, 1050A-PA01AA1SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647007

HUSKY PUMP, 1050A-PA01AA1PPACBNPT

Graco 647007 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, AC Balls & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Acetal
          • Center Section Material: Aluminum
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Threaded
          • Diaphragm Compatible Material: Buna
          • Diaphragm Material: Buna-N
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Inlet Thread Gender: Female
          • Fluid Inlet Thread Type: NPT
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Outlet Thread Gender: Female
          • Fluid Outlet Thread Type: NPT
          • Fluid Section Material: Aluminum
          • Manifold Configuration: End Port, Center Port
          • Manifold O-Ring Material: PTFE
          • Material: Aluminum
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 6312-9

GG 647022

HUSKY PUMP, 1050A-PA01AA1SSSSPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 6308-82

GG 626582

GG 647008

HUSKY PUMP, 1050A-PA01AA1TPTPTP

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647028

HUSKY PUMP, 1050A-PA01AA1SSPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647004

HUSKY PUMP, 1050A-PA01AA1PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647003

HUSKY PUMP, 1050A-PA01AA1PPBNBNPT

Graco 647003 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, BN Balls & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Buna-N
          • Center Section Material: Aluminum
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Threaded
          • Diaphragm Compatible Material: Buna
          • Diaphragm Material: Buna-N
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Inlet Thread Gender: Female
          • Fluid Inlet Thread Type: NPT
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Outlet Thread Gender: Female
          • Fluid Outlet Thread Type: NPT
          • Fluid Section Material: Aluminum
          • Manifold Configuration: End Port, Center Port
          • Manifold O-Ring Material: PTFE
          • Material: Aluminum
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 626523

GG 647075

HUSKY PUMP, 1050A-PA01AA1ACPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647085

HUSKY PUMP, 1050A-PA01AA2PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647016

HUSKY PUMP, 1050A-PAU1AA1TPACTP

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

GG 647109

HUSKY PUMP, 1050A-PA01AA2SSPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647076

HUSKY PUMP, 1050A-PA01AA1ACPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647099

HUSKY PUMP, 1050A-PA01AA2SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647346

HUSKY PUMP, 1050A-PA01CA1SSSSPOPT

Graco 647346 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, DataTrak AL Center Section, SS Seats, SS Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: 316 Stainless Steel
          • Center Section Material: Aluminum
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Threaded
          • Diaphragm Compatible Material: PTFE
          • Diaphragm Material: PTFE Overmold
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Inlet Thread Gender: Female
          • Fluid Inlet Thread Type: NPT
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Outlet Thread Gender: Female
          • Fluid Outlet Thread Type: NPT
          • Fluid Section Material: Aluminum
          • Manifold Configuration: Center Port, End Port
          • Manifold O-Ring Material: PTFE
          • Material: Aluminum
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 647158

HUSKY PUMP, 1050A-PA01AA2ACACPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647669

HUSKY PUMP, 1050A-PA01AA1BNBNBN

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647666

HUSKY PUMP, 1050A-PA01AA1TPACTP

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 648007

HUSKY PUMP, 1050A-E, BN/BN/BN/4A

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 647731

HUSKY PUMP, 1050A-PAU3AA1BNACTP

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

GG 647736

GG 647673

HUSKY PUMP, 1050A-PA01AA3SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrak - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 647670

HUSKY PUMP, 1050A-PA01AA1FKFKFK

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649001

HUSKY PUMP, 1050P-PP01AP1PPSPSPPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 648032

HUSKY PUMP, 1050A-E, SS/PT/PS/4B

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 648212

HUSKY PUMP, 1050A-E, SS/PT/PS/5A

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 647648

HUSKY PUMP, 1050A-PAU3AA1TPACTP

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

GG 647689

HUSKY PUMP, 1050A-PA01EA1SPSPSPPT

Graco 647689 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section with BN Seals, SP Seats, SP Balls & SP Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Santoprene
          • Center Section Material: Aluminum
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Threaded
          • Diaphragm Compatible Material: Santoprene
          • Diaphragm Material: Santoprene
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Inlet Thread Gender: Female
          • Fluid Inlet Thread Type: NPT
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Outlet Thread Gender: Female
          • Fluid Outlet Thread Type: NPT
          • Fluid Section Material: Aluminum
          • Manifold Configuration: Center Port, End Port
          • Manifold O-Ring Material: PTFE
          • Material: Aluminum
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 649006

HUSKY PUMP, 1050P-PP01AP1PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 648187

HUSKY PUMP, 1050A-E, BN/BN/BN/5B

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 648097

HUSKY PUMP, 1050A-E, BN/BN/BN/4D

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 649010

HUSKY PUMP, 1050P-PP01AP1SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649007

HUSKY PUMP, 1050P-PP01AP1PPPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649009

HUSKY PUMP, 1050P-PP01AP1PPCRCOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649021

HUSKY PUMP, 1050P-PP01AP1SPSPSPPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649037

HUSKY PUMP, 1050P-PP01AP2PPCRCOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649201

HUSKY PUMP, 1050C-PC01AC2PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649176

HUSKY PUMP, 1050C-PC01AC1PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649030

HUSKY PUMP, 1050P-PP01AP2PPBNBNPT

Graco 649030 Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, BN Balls, BN Diaphragm & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Buna-N
          • Center Section Material: Polypropylene
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: End Flange ANSI/DIN
          • Diaphragm Compatible Material: Buna
          • Diaphragm Material: Buna-N
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Section Material: Polypropylene
          • Manifold Configuration: End Port
          • Manifold O-Ring Material: PTFE
          • Material: Polypropylene
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Operating Temperature ( degree C): 66
          • Maximum Operating Temperature ( degree F): 150
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 649034

HUSKY PUMP, 1050P-PP01AP2PPPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649389

HUSKY PUMP, 1050F-PP01AF1FKFKFK

Graco 649389 Husky 1050 PVDF Pump, Center Flange, PP Center Section, FKM Seats, FKM Balls & FKM Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Fluoroelastomer
          • Center Section Material: Polypropylene
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: Center Flange ANSI/DIN
          • Diaphragm Compatible Material: FKM
          • Diaphragm Material: Fluoroelastomer
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Section Material: PVDF (Kynar)
          • Manifold Configuration: Center Port
          • Material: PVDF
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 649403

HUSKY PUMP, 1050F-PP01AF2FKFKFK

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649043

HUSKY PUMP, 1050P-PP01AP2SSSPSPPT

Graco 649043 Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, SS Seats, SP Balls & SP Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life

  Up to 5x longer diaphragm life for less maintenance and downtime

  • Modular Air Valve

    Stall-free, low pulsation operation provides smooth and rapid changeover

    • One-Piece Center Section

      Eliminates air leaks for more efficient operation

      • Multiple Ports

        Increased number of ports for installation flexibility

        • Optional Features

          DataTrak - Runaway protection and tracks material usage

          Pulse Output - Cycle count capability

          • Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
          • 30% more efficient than the market leader
          • 20% increase in fluid flow compared to the Husky 1040

          
          

          • Model: Husky
          • Series: 1050
          • Air Exhaust Port Size (in): 3/4
          • Air Exhaust Port Thread Gender: Female
          • Air Exhaust Port Thread Type: NPT
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Application: Industrial
          • Ball Material: Santoprene
          • Center Section Material: Polypropylene
          • Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
          • Connection Type: End Flange ANSI/DIN
          • Diaphragm Compatible Material: Santoprene
          • Diaphragm Material: Santoprene
          • Fluid Inlet Size (cm): 2.54
          • Fluid Inlet Size (in): 1
          • Fluid Inlet Size (mm): 25.4
          • Fluid Outlet Size (cm): 2.54
          • Fluid Outlet Size (in): 1
          • Fluid Outlet Size (mm): 25.4
          • Fluid Section Material: Polypropylene
          • Manifold Configuration: End Port
          • Manifold O-Ring Material: PTFE
          • Material: Polypropylene
          • Maximum Air Consumption (SCFM): 67
          • Maximum Air Pressure (bar): 8.6
          • Maximum Air Pressure (kPa): 860
          • Maximum Air Pressure (MPa): 0.86
          • Maximum Air Pressure (psi): 125
          • Maximum Cycle Rate (CPM): 280
          • Maximum Flow Rate (GPM): 50
          • Maximum Flow Rate (L/min): 189
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Fluid Pressure (bar): 8.6
          • Maximum Fluid Pressure (kPa): 860
          • Maximum Fluid Pressure (MPa): 0.86
          • Maximum Fluid Pressure (psi): 125
          • Maximum Operating Temperature ( degree C): 66
          • Maximum Operating Temperature ( degree F): 150
          • Maximum Solid Size (cm): 0.3175
          • Maximum Solid Size (in): 0.125
          • Maximum Solid Size (mm): 3.175
          • Power Source: Air

GG 649186

HUSKY PUMP, 1050C-PC01AC1SSPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649049

HUSKY PUMP, 1050P-PP01AP2SPSPSPPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649051

HUSKY PUMP, 1050P-PP01AP2BNBNBN

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649035

HUSKY PUMP, 1050P-PP01AP2PPPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649117

GG 649398

HUSKY PUMP, 1050F-PP01AF2PVPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649029

HUSKY PUMP, 1050P-PP01AP2PPSPSPPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649038

HUSKY PUMP, 1050P-PP01AP2SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649177

HUSKY PUMP, 1050C-PC01AC1PPPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 649385

HUSKY PUMP, 1050F-PP01AF1PVPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 650012

GG 650013

HUSKY PUMP, 1050P-E, SP/SP/SP/4A

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 650110

HUSKY PUMP, 1050P-E, PP/PT/PS/5B

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 650307

HUSKY PUMP, 1050P-E, BN/BN/BN/6A

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology

• Handles slurries and abrasives all without damage to the pump
• Gentle on shear sensitive material

Diaphragm Pump

• Runs dry
• No rotating or moving fluid seals
• Self-priming

Electric Drive

• Reduce energy consumption and operating costs
• Increase pump control
• Accurately meter fluid

Fluid Section

• Create the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms

Patent Pending Air Charged Drive

• Increase diaphragm life without compromising your fluid
• Ability to reduce pulsation on fluid outlet
• Stalls under pressure without additional switches and controls

GG 650577

GG 651009

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 651000

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 651011

HUSKY PUMP, 1050S-PA01AS1SSPTPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 651005

HUSKY PUMP, 1050S-PA01AS1SSSSPOPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 651015

HUSKY PUMP, 1050S-PA01AS1SPSPSPPT

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

GG 651016