Search
GRACO INC. S10595
GRACO INC. S10595 branded products
Power Supply, 24 VDC, 4A, 100W, 230VAC
GG 24D207
GG 24D207
Power Supply, 24 VDC, 4A, 100W, 230VAC
$1,085.00
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
GG 24D233
GG 24D233
250 Model ISO Orifice Kit With 0.039 In, 0.99 MM, Impingement Port Size
$270.00
Kit, Needle And Nozzle
GG 24D280
GG 24D280
KIT,NEEDLE AND NOZZLE
Graco 24D280 Needle/Nozzle Kit for AirPro EFX LVMP Guns with 0.043 inch (1.1 mm) Nozzle
- Compatible Material: Motor Oil, Gear Oil, Automatic Transmission Fluid, Oil
$260.00
Kit, Needle, Nozzle, .028, HVLP
GG 24D303
GG 24D303
KIT,NEEDLE,NOZZLE,.028,HVLP
Graco 24D303 Needle/Nozzle Kit for AirPro EFX HiTEch Guns with 0.028 inch (0.7 mm) Nozzle
$519.00
Kit, G15 Retaining Ring
GG 24D438
GG 24D438
KIT,G15 RETAINING RING
Graco 24D438 G15 Spray Gun Retaining Ring Kit
$63.00
Kit, G40 Retaining Ring
GG 24D439
GG 24D439
KIT,G40 RETAINING RING
Graco 24D439 G40 Spray Gun Retaining Ring/ Tip Guard Kit. Includes retaining ring with guard, PTFE O-Ring, and PTFE Washer
$71.00
Airpro Gun, Pressure, Conv
GG 24D472
GG 24D472
AIRPRO GUN, PRESSURE, CONV
Graco 24D472 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, for Automotive Applications
The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.
- Even material distribution through the spray pattern for optimum coverage
- Improved transfer efficiency through reduced air consumption
- Enhanced atomization through material-specific aircaps
- Ultra-light trigger pull reduces operator muscle stress
- Ergonomic gun handle provides a comfortable grip
- Rounded control knobs for operator comfort
- Optimize spray performance with our cutting edge aircap and nozzle design
- Choose from a wide range of gun models to meet the needs of your specific application
- Model: AirPro
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Type: NPSM
- Application: Automotive
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Adhesives, Ceramics, Fast-Set, High Solids, Sealants, Solvent borne, Stains, UV Coating, Waterborne
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 0.9525
- Fluid Inlet Size (in): 3/8
- Fluid Inlet Size (mm): 9.525
- Fluid Inlet Thread Type: NPSM
- Fluid Orifice Size (cm): 0.11
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.1
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Conventional Gun
- Gun Weight (g): 410
- Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 109
- Maximum Fluid Pressure (bar): 21
- Maximum Fluid Pressure (kPa): 2100
- Maximum Fluid Pressure (MPa): 2.1
- Maximum Fluid Pressure (psi): 300
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 109
- Product Type: Spray Gun
$0.00
Applicator, Md2, 1:1, Soft, Cs
GG 24D500
GG 24D500
APPLICATOR,MD2,1:1,SOFT,CS
Graco 24D500 MD2 Valve Applicator Kit (1:1 with Soft Seats) with Stainless Steel Chemical Connection Kit
Application: Accurately dispenses and mixes two-component sealants and adhesivesAdjustable Snuff-back Control
- Dispenses material only where you need it
Independent Air Cylinder
- Improves mean time to repair (MTTR)
Chromex Shafts
- Extends shaft life to better handle abrasive materials
Grease Isolation Chamber
- Ideal for moisture-sensitive materials
- Accessible grease fittings for easy maintenance
Adjustable Inlet Position
- Flexibility during system installation
- Minimizes dead spaces in fluid path
All-SST Wetted Section
- Maximizes material compatibility
Two Nose Options
- Customizes material mixing
Minimizes maintenance time and costs while maximizing dispense time
Designed with fewer parts and is easy to clean
Streamlines maintenance and service
Complete modular design adapts to different installation needs
No unique tools required
- Model: MD2
$4,780.00
Gl-43 Injector, 3 Injector Manifold
GG 24E243
GG 24E243
GL-43 INJECTOR, 3 INJECTOR MANIFOLD
GL-43 Carbon Steel Oil 3-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$191.00
U-Cup Dura-Flo 430 CC Lower Seal and Bearing Replacement Kit
GG 24E212
GG 24E212
U-Cup Dura-Flo 430 CC Lower Seal and Bearing Replacement Kit
$1,195.00
Gl-43 Injector, Repl, Cs, 1/8" od Tube
GG 24E245
GG 24E245
GL-43 INJECTOR, REPL, CS, 1/8"OD TUBE
GL-43 Carbon Steel Oil Replacement Injector, 1/8 in. OutletWith its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$60.25
Husky System, Evacuation, Gm
GG 24E166
GG 24E166
HUSKY SYSTEM, EVACUATION, GM
Evacuation Pump Package - Husky 1050A (1 in) UL-Listed, Wall MountThe Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.
Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtimeModular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeoverOne-Piece Center Section - Eliminates air leaks for more efficient operationFour Bolt Joint Design - Bolted design provides even sealing pressure for leak-free operationMultiple Ports - Increased number of ports for installation flexibilityOptional Features - DataTrakâ„¢ (Runaway protection and tracks material usage), Pulse Output (Cycle count capability)Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040
$2,780.00
Gl-43 Injector, 4 Injector Manifold
GG 24E244
GG 24E244
GL-43 INJECTOR, 4 INJECTOR MANIFOLD
GL-43 Carbon Steel Oil 4-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$251.50
Gl-43 Injector, 2 Injector Manifold
GG 24E242
GG 24E242
GL-43 INJECTOR, 2 INJECTOR MANIFOLD
GL-43 Carbon Steel Oil 2-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-43 oil injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Handles low viscosity lubricants.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 750-1000 psi (52-69 bar) for optimal performance with low viscosity lubricants (#10 weight minimum)Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$134.00
Kit, Seal, Pd44
GG 24E248
GG 24E248
KIT,SEAL,SPOOL,H.V.,PD44
KIT INCLUDES: PACKING, QUAD RING [QTY. 4 ], PACKING, O-RING [QTY. 4 ], PACKING, O-RING [QTY. 6 ], SEAL, POSIPAK, .250IDX.437OD, ZAP [QTY. 2], LUBRICANT, GREASE, KRYTOX [QTY. 1]
$610.00
Gl-32 Injector, 1 Inj Manifold, Sst
GG 24E391
GG 24E391
GL-32 INJECTOR, 1 INJ MANIFOLD, SST
GL-32â„¢ Grease Injector, 304 Stainless Steel, 1-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 greaseOffered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$186.50
Gl-32 Injector, 2 Inj Manifold, Sst
GG 24E392
GG 24E392
GL-32 INJECTOR, 2 INJ MANIFOLD, SST
GL-32â„¢ Grease Injector, 304 Stainless Steel, 2-Injector Manifold, 1/4 NPTWith its one piece design, Graco's GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.
Accurate, reliable lubrication for every lube point on your machineLonger lasting seal design for trouble-free performancePrecision-honed components for reliable operation in challenging environmentsAdjustable output volume from .001–.008 in³ (0.02–0.13 cm³) to custom fit the system to meet the needs of each lube pointConvenient front-mounted cycle pin indicator for quick confirmation that the injector is functioning properlyOperating pressures from 1200–3500 psi (83–241 bar) for optimal performance with up to NLGI #2 greaseOffered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications
$282.50
Fitting, Elbow, Swivel, 1NPT, MF, CS
GG 127025
GG 127025
Fitting, Elbow, Swivel, 1NPT, MF, CS
$1,320.00
Block, Vise, Tool, Hose 3, 4, 5, 6, 8
GG 127145
GG 127145
Block, Vise, Tool, Hose 3, 4, 5, 6, 8
$104.00
Hose, InvisiPac, Heated, 4ft.
GG 127401
GG 127401
INVISIPAC HOSE, HEATED, 4FT
4 ft. (1.2 M) InvisiPac Heated Hose No. 6 (0.308 in./7.082 mm ID)Superior heated hose design is char resistant, reducing char buildup, resulting in more uptime and lower maintenance costs.
Standard model hoses are meant for dry environments only.Standard model hoses have a gray braided scuff guard.
$1,285.00
Hose, Heated, 8Ft
GG 127404
GG 127404
INVISIPAC HOSE, HEATED, 8FT
8 ft. (2.4 M) InvisiPac Heated Hose No. 6 (0.308 in./7.082 mm ID)Superior heated hose design is char resistant, reducing char buildup, resulting in more uptime and lower maintenance costs.
Standard model hoses are meant for dry environments only.Standard model hoses have a gray braided scuff guard.
$1,890.00
Meter, Def, W/Sst Breakaway
GG 127650
GG 127650
METER, DEF, W/SST BREAKAWAY
LDâ„¢ Automatic Nozzle with Built-In Electronic Turbine Meter, with Stainless Steel Breakaway SpoutGraco's LD Series DEF solutions offer long-lasting efficiency in a compact, high-performance electric pump package capable of pumping up to 9 gpm (34 lpm). Whether a small garage, large dealership, or heavy equipment maintenance facility, Graco has a complete line of Diesel Exhaust Fluid (DEF) products for every application. Our electric, pneumatic, or manual products are engineered specifically for the advanced needs of DEF fluid and are designed to minimize downtime and dispense materials quickly without compromising chemical integrity.
Typical applications include automotive and heavy-duty dealerships, service and fast lube centers, fleet service facilities, and in-plant.Manual shut-off valve withHigh 12 gpm (45 lpm) flow rate3/4 in BSPP inletLightweight – under 1 lb (0.5 kg)
$706.00
G1 Plus, Power Cable, 15 Ft, 3 Wire W/ CPC Connector
GG 127783
GG 127783
CABLE, 15 FT, S00W W/7 POS, 2 PIN RA
G-Series Power Cable - 15 ft, 2 wire with CPC ConnectorFor use with G-Mini, G3 and G5 Automatic Lubrication Pumps.CPC connector with 2 wires.
15 ft (4.6 m)
$97.50
Fitting, Elbow, Swivel, Push-To-Conn
GG 127852
GG 127852
FITTING, ELBOW, SWIVEL, PUSH-TO-CONN
- Connection Type: Push-to-Connect
$0.00
Cable, Gca, M12, 5Pin, F x m8, 4Pin, M
GG 128197
GG 128197
Cable, Gca, M12, 5Pin, F x m8, 4Pin, M
$81.00
Fitting, Adapter, 12Jicx08Jic, Fm, Ss
GG 128442
GG 128442
Fitting, Adapter, 12Jicx08Jic, Fm, Ss
$150.00
Fitting, Swivel Hose, 1/8" id 1/8Npt
GG 128562
GG 128562
FITTING, SWIVEL HOSE, 1/8"ID 1/8NPT
Field-Installable Swivel Hose End Fitting - 1/8 in. ID Hose, 1/8 NPT MaleField-Installable Swivel Hose End Fitting
1/8" ID Hose
1/8 NPT Male
$14.90
Hose, 1/4" Id, 2750 Psi, 100 Ft
GG 128572
GG 128572
HOSE, 1/4" ID, 2750 PSI, 100 FT
Hose, 1/4 in. ID, 2,750 PSI, 100 Feet, Braided with Polyurethane CoverHose, 1/4 in. ID, 2,750 PSI, 100 Feet, Braided with Polyurethane Cover
$311.00
Fitting, Swivel Hose, 1/4" id 1/4Npt
GG 128564
GG 128564
FITTING, SWIVEL HOSE, 1/4"ID 1/4NPT
Field-Installable Swivel Hose End Fitting - 1/4 in. ID Hose, 1/4 NPT MaleField-Installable Swivel Hose End Fitting
1/4" ID Hose
1/4 NPT Male
$15.30
Hose, 1/8" id, 3000 psi, 200 ft
GG 128570
GG 128570
HOSE, 1/8"ID, 3000PSI, 200FT
Hose, 1/8 in. ID, 3,000 PSI, 200 Feet, Braided with Polyurethane CoverHose, 1/8 in. ID, 3,000 PSI, 200 Feet, Braided with Polyurethane Cover
$414.00
Cable, Gca, M12, 8Pin, M, 4M, Pigtail
GG 128441
GG 128441
Cable, Gca, M12, 8Pin, M, 4M, Pigtail
$96.00
Nozzle, 1ORIF, Offset .018Dia, 15 DEG
GG 130816
GG 130816
Nozzle, 1ORIF, Offset .018Dia, 15 DEG
$72.75
Nozzle, 2ORIF, Dome, 016 Dia, 15 Deg
GG 130509
GG 130509
Nozzle, 2ORIF, Dome, 016 Dia, 15 Deg
$49.60
Swivel, Fitting, Elbow, 1 NPT x 1 NPT
GG 133529
GG 133529
Swivel, Fitting, Elbow, 1 NPT x 1 NPT
$1,060.00
Pendant, NFC 25 Pk
GG 131462
GG 131462
PENDANT, NFC, 25PK
NFC Tag Pendants - 25-PackProgram these NFC tags for total control of how much fluid goes into each asset. Assign one tag to each asset and one tag to each user to provide full visibility of the fluids being dispensed in your facility. There is no limit to the number of tags that can be issued at any given time - nor the amount of fluid that can be dispensed. NFC tags can also help prevent the wrong fluids from being dispensed into a reservoir.Assign one tag to each asset and one tag to each userCards can be reprogrammed at any time based on needs and personnel
$160.00
Nozzle, 2ORIF, Dome, 020 Dia, 15 Deg
GG 130510
GG 130510
Nozzle, 2ORIF, Dome, 020 Dia, 15 Deg
$54.50
Fast-Flo Pump, 1:1
GG 226945
GG 226945
FAST-FLO PUMP, 1:1
Graco 226945 1:1 Ratio Stainless Steel Fast-Flo Universal-Length Transfer Stubby Pump
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.
Application: Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 psi (12 bar). Ideal for lower viscosity fluids.- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
- Available in stainless steel or carbon steel
- Model: Fast-Flo
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Compatible Drum Height (in): 9.8000000000000007
- Compatible Material: Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Material: Stainless Steel
- Maximum Air Inlet Pressure (bar): 12.41
- Maximum Air Inlet Pressure (kPa): 1241
- Maximum Air Inlet Pressure (psi): 180
- Maximum Continuous Cycle Rate (CPM): 100
- Maximum Flow Rate (GPM): 4
- Maximum Flow Rate (L/min): 15.1
- Maximum Intermittent Cycle Rate (CPM): 4
- Maximum Working Pressure (bar): 12.4
- Maximum Working Pressure (kPa): 1240
- Maximum Working Pressure (MPa): 1.2
- Maximum Working Pressure (psi): 180
- Minimum Flow Rate (GPM): 180
- Package Options: None
- Portable: Non-Portable
- Power Type: Pneumatic
- Pump Ratio: 1:1
$3,100.00
Fireball 300 Lubricator, Chassis, 50-1
GG 225827
GG 225827
FIREBALL 300 LUBRICATOR, CHASSIS, 50-1
Fire-Ball® 300 Series 50:1 35 to 50 lb. (16 to 23 kg) Grease Pump - Stationary Pail Dispenser PackageAs the mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivaled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers can be more productive. The durable pumps are renowned for their durability, with pumps built decades ago still operating efficiently.Install the Fire-Ball 300 50:1 in grease dispense applications.Reliable Flow - A 3 inch (76.2 mm) differential air motor and the double-acting pump design provides reliable fluid flow and accurate dispense.Durable - Thick cast aluminum air motor housing offers unmatched durability.Fewer Repairs - Fewer moving parts in the air motor assembly means less downtime and low repair cost.Extended Seal Life - In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.Reduce Downtime - Displacement rods have minimal wear due to a proprietary Graco manufacturing process.Superior Sealing - Non-metallic poppet valves offer positive sealing performance, even with contaminated "dirty" air environments for long life without repair.Reduced Icing - Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.Corrosion-Resistant - Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.
$3,360.00
Fast-Flo Pump, (1:1), Cs, 55 Gal
GG 226946
GG 226946
FAST-FLO PUMP, (1:1), CS, 55 GAL
Graco 226946 1:1 Ratio Fast-Flo Air Operated Piston Transfer Carbon Steel/Stainless Steel Drum Pump with T Packing
Fast Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options.
Application: Maximum delivery up to 5 gpm (19 lpm) and maximum fluid working pressure up to 180 psi (12 bar). Ideal for lower viscosity fluids.- Air-powered for high reliability and low cost
- Delivery up to 5 gpm (19 lpm)
- Available in stainless steel or carbon steel
- Model: Fast-Flo
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Application: Industrial
- Compatible Drum Height (in): 34.6
- Compatible Material: Antifreeze, Asphalt, Windshield Washer Fluid, Motor Oil, Used Oil, Hydraulic Fluid, Oil, Ink
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 19.05
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Material: Carbon Steel
- Maximum Air Inlet Pressure (bar): 12.41
- Maximum Air Inlet Pressure (kPa): 1241
- Maximum Air Inlet Pressure (psi): 180
- Maximum Continuous Cycle Rate (CPM): 100
- Maximum Flow Rate (GPM): 4
- Maximum Flow Rate (L/min): 15.1
- Maximum Intermittent Cycle Rate (CPM): 4
- Maximum Working Pressure (bar): 12.4
- Maximum Working Pressure (kPa): 1240
- Maximum Working Pressure (MPa): 1.2
- Maximum Working Pressure (psi): 180
- Minimum Flow Rate (GPM): 180
- Package Options: None
- Portable: Non-Portable
- Power Type: Pneumatic
- Pump Ratio: 1:1
$1,530.00
Assembly, Valve, Backpressure, Catalyst
GG 22910-00
GG 22910-00
Assembly, Valve, Backpressure, Catalyst
$325.00
30:1 Pres Sev Duty Paint System
GG 231063
GG 231063
PRESIDENT SPRAYER,PAINT,30-1,55 GL
Graco 231063 Stationary Airless Paint Sprayer- 30:1 President Hydra-Spray
Application: Used for airless spray application of paints and other coatings from a 55 gallon (208 liter) drum
$14,340.00
4:1 President Pump w/Drum Cover & Agitator
GG 230992
GG 230992
4:1 President Pump w/Drum Cover & Agitator
$12,210.00
Agitator, Hd, Sst
GG 231413
GG 231413
AGITATOR, HD, SST
Heavy Duty Back-Geared Drum Agitator with elevator and drum cover, air driven, 1/2 HP, 32 inches (81.25 cm) longHeavy Duty Back-Geared Drum Agitator with elevator and drum cover. Does not include siphon kit.Heavy duty gearbox mixes high viscosity materialsLeak-free and oil-less gearbox prevents material contaminationStainless steel agitator and cover for corrosion resistance and waterborne compatibilityTwin paddles thoroughly mix finishing materialsSiphon option allows material transfer through agitator shaftAccess port for easy sampling and inspection of material during operationMaximum viscosity 3,000 cps
$5,820.00
30:1 President Cart Mt
GG 231921
GG 231921
PRESIDENT SYSTEM, 30:1,CS,AIRLESS
Graco 231921 30:1 President Pump Package, with 25 ft hose, and gun. 3000 psi max fluid working pressue, 100 psi max input pressure, Series A
$11,070.00
Payment options
