Search
GRACO INC. S10595
GRACO INC. S10595 branded products
Pump Package Repair Kit
GG 17K162
GG 17K162
KIT, REPAIR, PACKING
Pump Packing Repair KitReplace a worn or damaged pump with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibilityGraco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come.Graco Tech Support can further assist with troubleshooting sprayer operation
$222.00
Contractor Flat Tip, Spray 635
GG 269635
GG 269635
CONTRACTOR FLAT TIP, SPRAY 635
Contractor Flat Tip, 635The 635 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.035 inch orifice.
$11.40
Contractor Flat Tip, Spray 631
GG 269631
GG 269631
CONTRACTOR FLAT TIP, SPRAY 631
Contractor Flat Tip, 631The 631 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.031 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269413
GG 269413
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 413The 413 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.013 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269519
GG 269519
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 519The 519 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.019 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269621
GG 269621
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 621The 621 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.021 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269427
GG 269427
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 427The 427 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.027 inch orifice.
$11.40
Contractor Flat Tip, Spray 627
GG 269627
GG 269627
CONTRACTOR FLAT TIP, SPRAY 627
Contractor Flat Tip, 627The 627 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.027 inch orifice.
$11.40
Contractor Flat Tip, Spray 623
GG 269623
GG 269623
CONTRACTOR FLAT TIP, SPRAY 623
Contractor Flat Tip, 623The 623 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.023 inch orifice.
$11.40
Contractor Flat Tip, Spray 625
GG 269625
GG 269625
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 625The 625 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.025 inch orifice.
$11.40
Contractor Flat Tip, Spray 715
GG 269715
GG 269715
CONTRACTOR FLAT TIP, SPRAY 715
Contractor Flat Tip, 715The 715 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.015 inch orifice.
$11.40
Contractor Flat Tip, Spray 717
GG 269717
GG 269717
CONTRACTOR FLAT TIP, SPRAY 717
Contractor Flat Tip, 717The 717 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.017 inch orifice.
$11.40
Contractor Flat Tip, Spray 719
GG 269719
GG 269719
CONTRACTOR FLAT TIP, SPRAY 719
Contractor Flat Tip, 719The 719 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.019 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269513
GG 269513
CONTRACTOR FLAT TIP, SPRAY
Contractor Flat Tip, 513The 513 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.013 inch orifice.
$11.40
Contractor Flat Tip, Spray
GG 269725
GG 269725
CONTRACTOR FLAT TIP, SPRAY
Graco 269725 Contractor Flat Tip, 725
The 725 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.025 inch orifice.
- Model: Contractor
- Series: Flat Tip
- Compatible Material: Architectural Coating
- For Use With: Silver Plus Airless Spray Gun
- Maximum Fan Width (cm): 35
- Maximum Fan Width (in): 14
- Maximum Fan Width (mm): 406
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.54
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Maximum Working Pressure (psi): 5000
- Minimum Fan Width (in): 14
- Minimum Fan Width (mm): 356
- Orifice Diameter (in): 0.025
- Pattern Size (in): 14 to 16
- Pattern Size (mm): 355.6 to 406.4
$11.40
Kit, O-Ring-Hi Fk-4
GG 26B353
GG 26B353
KIT, O-RING-HI FK-4
Graco 26B353 2-inch FKM (Viton) Seal Kit
$186.00
Kit, O-Ring-H2 Ep-4
GG 26B355
GG 26B355
KIT, O-RING-H2 EP-4
Graco 26B355 2-inch EPDM Seal Kit for FG Pump Models
$29.00
Gun, AA, 1500, GF Aircap, w/AXM or AXF Tip of Choice
GG 26B500
GG 26B500
PERFORMAA GUN, AA, 1500, GF
Graco 26B500 PerformAA 1500 Air Assist Gun with General Finishing air cap
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Indexing air cap for accurate spray position
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,140.00
Gun, AA, 1500, GF Aircap & Fluid Swivel
GG 26B501
GG 26B501
PERFORMAA GUN, AA, 1500, GF, SWIVEL
PerformAA 1500 Air Assist Gun with General Finishing air cap and fluid swivelPerformance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.High quality 1500 psi air assist spray gunGeneral finishing air cap for a wide range of materialsIncludes a low profile fluid swivelFine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choiceIndexing air cap for accurate spray position
$1,205.00
Gun, Aa, 1500, Wl
GG 26B502
GG 26B502
PERFORMAA GUN, AA, 1500, WL
Graco 26B502 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap and light trigger pull
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Indexing air cap for accurate spray position
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,140.00
Performa Gun, AA, 1500 WL, Swivel
GG 26B503
GG 26B503
PERFORMAA GUN, AA, 1500, WL, SWIVEL
Graco 26B503 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap, light trigger pull and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Includes a low profile fluid swivel
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,200.00
Performa AA 1500 Air Assist Gun
GG 26B505
GG 26B505
PERFORMAA GUN, AA, 1500, LV, SWIVEL
Graco 26B505 PerformAA 1500 Air Assist Gun with Low Viscosity air cap, light trigger pull and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 1500 psi air assist spray gun
- Low viscosity air cap for even dispersion of light materials
- Includes a low profile fluid swivel
- Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
- Model: PerformAA 15
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 480
- Gun Weight with Tip and Guard (oz): 17.1
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 105
- Maximum Fluid Pressure (kPa): 10500
- Maximum Fluid Pressure (MPa): 10.5
- Maximum Fluid Pressure (psi): 1500
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 15.25
- Overall Length (in): 6
- Overall Length (mm): 152
- Product Type: Spray Gun
$1,205.00
Performa AA 5000 Air Assist Gun
GG 26B509
GG 26B509
PERFORMAA GUN, AA, 5000, GF, HIGH-FLOW
Graco 26B509 PerformAA 5000 Air Assist Gun with General Finishing air cap and no fluid filter
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- No fluid filter for high flow applications
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Solventborne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,295.00
Gun, PerformAA, 5000, GF
GG 26B510
GG 26B510
PERFORMAA GUN, AA, 5000, GF
Graco 26B510 PerformAA 5000 Air Assist Gun with General Finishing air cap
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Carbide fluid seat and carbide ball for durability
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,295.00
Gun, AA, 5000, GF, Swivel
GG 26B511
GG 26B511
PERFORMAA GUN, AA, 5000, GF, SWIVEL
Graco 26B511 PerformAA 5000 Air Assist Gun with General Finishing air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- General finishing air cap for a wide range of materials
- Includes a low profile fluid swivel
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
- Feed Type: Pressure Feed
- Fluid Adjustment Knob: Clicking
- Fluid Inlet Size (cm): 0.635
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Size (mm): 6.35
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Included: 1
- Gun Type: Air-Assisted Gun
- Gun Weight (g): 453
- Gun Weight (kg): 0.45
- Gun Weight (lb): 1
- Gun Weight (oz): 16
- Gun Weight with Tip and Guard (g): 490
- Gun Weight with Tip and Guard (oz): 17.4
- Gun Weight without Tip and Guard (g): 460
- Gun Weight without Tip and Guard (oz): 16.2
- Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
- Maximum Air Inlet Pressure (bar): 7
- Maximum Air Inlet Pressure (kPa): 700
- Maximum Air Inlet Pressure (MPa): 0.7
- Maximum Air Inlet Pressure (psi): 100
- Maximum Air Pressure (bar): 7
- Maximum Air Pressure (kPa): 700
- Maximum Air Pressure (MPa): 0.7
- Maximum Air Pressure (psi): 100
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Maximum Fluid Pressure (bar): 345
- Maximum Fluid Pressure (kPa): 34500
- Maximum Fluid Pressure (MPa): 34.5
- Maximum Fluid Pressure (psi): 5000
- Maximum Fluid Temperature ( degree C): 43
- Maximum Fluid Temperature ( degree F): 110
- Overall Height (cm): 20.8
- Overall Height (in): 8.2
- Overall Height (mm): 208
- Overall Length (cm): 17.25
- Overall Length (in): 6.8
- Overall Length (mm): 173
- Product Type: Spray Gun
$1,365.00
PerformAA 5000 Air Assist Gun
GG 26B512
GG 26B512
PERFORMAA GUN,AA,5000,WL,SWIVEL
Graco 26B512 PerformAA 5000 Air Assist Gun with Wood Lacquer air cap and fluid swivel
Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.
- High quality 5000 psi air assist spray gun
- Wood lacquer air cap for wood finishing top coats and lacquers
- Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice
- Clicking fan pattern adjustment knob for accurate adjustment
- Model: PerformAA 50
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Bleed Type: Non-Bleeder
- Compatible Material: Waterborne, Latex, Plural Component Materials, Polyurethane, Urethane, UV Coating, Varnish
- Compatible Spray Tip: AXM, AXF
$1,365.00
Module, G-Barrier, Power Supply
GG 26C724
GG 26C724
MODULE,G-BARRIER, POWER SUPPLY
- Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC
$5,060.00
Kit, Cs T4, Pump/Fluid/Air
GG 26D003
GG 26D003
KIT, CS T4, PUMP/FLUID/AIR
T4 Complete Package: Includes 2 Pumps (Carbon Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer KitTransfer Pumps are required to move A and B materials to the Reactor® Spray Systems. The T4 Transfer Pump combines Graco’s proven Merkur® air-motor and carbon steel lower. The T4 is a 3:1 ratio pump with ProConnect technology – allowing you to quickly connect and disconnect the air motor from the pump lower.Quick Transfer Between Drums – quickly change to a new drum of material without the mess of dripping chemical by using multiple pump lowers.Easier to Maneuver – easily transfer the T4 pump between drums by quickly disconnecting the air motor from the lower before transferring. This makes the pump lighter weight and reduces the necessary ceiling height of your rig.Eliminate Downtime – get up and running quickly when your pump lower requires maintenance by having a spare pump lower that can easily be installed.
$5,130.00
Valve, Dispense, Mdx
GG 26D274
GG 26D274
VALVE, DISPENCE, MDX
MDX, High flow valve, 2-componentThe Graco MDX valve is designed for a two-component high flow dispensing application. The high wear resistance design enables an excellent life performance even with dispensing highly abrasive material such as Thermal Interface Material. It`s a perfect fit in EV battery pack, solar energy, wind power and etc. markets.High flow rate dispensing, 2 componentHigh flow rateEasy intergration for automationHigh wear resistance for reduced maintainanceWear resistant design handles viscous and abrasive thermal interface material, lessening required maintenance.Recirculation function keeps material from settling.
$15,000.00
Payment options
