GRACO INC. S10595

GG 17L983

SWITCH, PROXIMITY ADAPT, 7/16-20

Graco 17L983 Proximity Switch, 7/16-20, 7500 psi (517.1 bar)

Magnetically-operated sensing devices for sending system data to the controller or PLC.

• Available in 115 VAC or 12-32 VDC
• Available for all series progressive families to provide cycle rates up to 200 CPM
• Pressure ratings up to 10,000 psi (690 bar)
• Select models available with UL and CSA approvals

• Model: Trabon

• Application: Off-Road Equipment, On-Road Vehicles, In-Plant Machinery

• Compatible Material: Oil, Grease

• Material: PBT (Pocan), PC (Makrolon), FPM, Stainless Steel

• Maximum Voltage (V dc): 32

• Maximum Working Pressure (bar): 517.1
• Maximum Working Pressure (kPa): 51710
• Maximum Working Pressure (MPa): 51.7
• Maximum Working Pressure (psi): 7500

• Minimum Voltage (V dc): 9.6

• Power Connection Type: M12

GG 17M363

ULTRA SPRAYER, DC, HH, 120V

Graco 17M363 Ultra Cordless Handheld Airless Sprayer

Proven By Pros, Ultra Cordless sprayers provide the fastest way to finish small jobs. Deliver a perfect airless finish in seconds with fast, easy setup and the easy-to-clean design reduces cleanup to just a few minutes so you get to the next job quicker.

• Triax II Triple Piston Pump
  

  Pump 3X more gallons before service

  Clean up in minutes

  No inlet check valve to get stuck - prime and spray in seconds

  Fast, on-the-job pump replacement with ProConnect

• DEWALT 20V MAX Lithium Ion Battery System

  Spray up to 1 gallon with each charge

  Compatible with any DEWALT 20V MAX Lithium Ion battery

  Comes standard with 2 batteries and charger

  3-LED fuel gauge system allows immediate feedback on state of charge

  Lightweight design and 30% faster charge time (35 minutes)

• ProConnect

  On-The-Job Pump Replacement System

  One Tool Replacement - Replace the pump in 3 steps using only a screwdriver

• ProControl II

  Adjust motor speed to spray at any speed the job demands

  More control to deliver a professional finish - every job, every time

• RAC X FF LP Tips

  Provides superior finish at low pressure

  Reverse-A-Clean (RAC) SwitchTips make cleaning tip clogs simple

  Large range of sizes available to meet the job requirements

  Works on all Graco Airless Sprayers - handhelds to large airless

• 32 oz FlexLiner Paint Bags

  Fast cleanup with disposable liners and no suction tube to clean

  Easy Setup

• FlexLiner QuickFill Funnel

  Click and fill design for faster refills

  Automatically strains paint while pouring

• Model: Ultra
• Series: Cordless

• Battery Capacity (Ah): 2

• Battery Chemistry: Lithium-ion
• Battery Voltage (V): 20

• Charging Time (min): 35

• Compatible Replacement Pump: 17P186

• Filter Mesh Size: 60

• Frame Configuration: Handheld

• Includes: RAC X FF LP 514 Spray Tip, RAC X Guard, 4 - 32 oz FlexLiner Bags, 2 - DEWALT 20V MAX 2.0 Ah Lithium Ion Batteries, DEWALT 20V MAX Battery Charger, 60 Mesh Filter, Storage Bag, Pump Armor 4 oz, QuickFill Funnel

• Maximum Tip Size (in): 0.016

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 14
• Maximum Working Pressure (psi): 2000

• Minimum Working Pressure (bar): 35
• Minimum Working Pressure (kPa): 3500

• Minimum Working Pressure (psi): 500

• Overall Height (cm): 26.7
• Overall Height (in): 10.5
• Overall Height (mm): 266.7
• Overall Length (cm): 36
• Overall Length (in): 14
• Overall Length (mm): 356
• Overall Width (cm): 12.7
• Overall Width (in): 5
• Overall Width (mm): 127

• Power Source: Battery Powered
• Pressure Control Type: ProControl II

• Pump Type: Triax Triple Piston

GG 17M359

ULTRA SPRAYER, AC HH, 120V

Graco 17M359 Ultra Corded Handheld Airless Sprayer

Pros agree. Airless handheld sprayers are the essential tool for turning small jobs around fast. Industry-tested Graco Ultra handhelds are the most advanced in the world, delivering unbeatable speed, flawless finish, and unmatched reliability.

• Triax II Triple Piston Pump
  

  Pump 3X more gallons before service

  Clean up in minutes

  No inlet check valve to get stuck - prime and spray in seconds

  Fast, on-the-job pump replacement with ProConnect

• ProConnect

  On-The-Job Pump Replacement System

  One Tool Replacement - Replace the pump in 3 steps using only a screwdriver

• SmartControl

  Spray at any hand speed with professional finish every time

  Precision pressure control delivers a consistent spray fan without pressure fluctuations

• RAC X FF LP Tips

  Provides superior finish at low pressure

  Reverse-A-Clean (RAC) SwitchTips make cleaning tip clogs simple

  Large range of sizes available to meet the job requirements

  Works on all Graco Airless Sprayers - handhelds to large airless

• 32 oz FlexLiner Paint Bags

  Fast cleanup with disposable liners and no suction tube to clean

  Easy Setup

• FlexLiner QuickFill Funnel

  Click and fill design for faster refills

  Automatically strains paint while pouring

• Model: Ultra
• Series: Corded

• Amperage (A): 15

• Compatible Replacement Pump: 17P185

• Frame Configuration: Handheld

• Includes: RAC X FF LP 514 Spray Tip, RAC X Guard, 4 - 32 oz FlexLiner Bags, 60 Mesh Filter, Storage Bag, Pump Armor 4 oz, QuickFill Funnel

• Maximum Tip Size (in): 0.016

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 14
• Maximum Working Pressure (psi): 2000

• Motor Type: AC

• Overall Height (cm): 26.7
• Overall Height (in): 10.5
• Overall Height (mm): 266.7
• Overall Length (cm): 36
• Overall Length (in): 14
• Overall Length (mm): 356
• Overall Width (cm): 12.7
• Overall Width (in): 5
• Overall Width (mm): 127

• Power Cord Length (cm): 46
• Power Cord Length (in): 18
• Power Cord Length (mm): 457
• Power Source: Electric
• Pressure Control Type: SmartControl

• Pump Type: Triax Triple Piston

• Recommended Annual Usage (gal): 50

GG 17L390

GG 17M835

GG 17L622

VALVE, SAFETY RELIEF, 220 PSI

GG 17M842

GG 17N042

GG 17N269

FINISHPRO HVLP SPRAYER, 9.5, PRO COMP SERIES

Graco 17N269 FinishPro HVLP 9.5 ProComp Series Sprayer

The FinishPro HVLP 9.5 ProComp Series sprayer provides unmatched long-life with SmartStart, double the fluid capacity and an integrated compressor for the ultimate in power and performance to spray thicker materials on medium to large fine finish jobs.

• Integrated Compressor

  Pressurize remote cup up to 25 psi

  Allows spraying of thicker materials

  Quick connect hose connections
  

• 2-Quart Remote Cup

  Fewer refills

  Increase productivity and ease-of-use without cup mounted on the gun

  Fine-tune pressure with pressure regulator and gauge

  Includes belt hook and convenient shoulder strap
  

• TurboForce Technology

  Exclusive, proprietary turbine design builds more pressure through each stage, resulting in more performance at the gun

  More air flow and air pressure means higher production with less thinning of material

  Generates less heat and provides longer turbine life

• TurboControl System with LED Display

  Adjust the TurboForce turbine speed to match the performance you require

  Reduces heat build up

  Runs quieter

  Extends turbine system life

  50% longer hoses

• Industry Leading Dual Filtration System

  Automotive-grade filter has high performance filtration

  Outperforms foam and traditional paper filters used on most HVLP systems

• EDGE II Plus Gun

  Ultimate control with independent user controls for material volume, air flow, and spray fan size

  4X more productivity

  FlexLiner Bag System

  Learn more: EDGE II Plus Gun

• 1-Quart FlexLiner Cup

  FlexLiner Paint Bag System replaces traditional material cups

  Includes conversion kit use gun-mounted 1-quart FlexLiner cup

  Spray at any angle with no adjustment - even upside down!

• Super-Flex Air Hose

  15% lighter weight than other leading brands for more control at the gun

  30 ft length included

  No tools needed to connect

• Stainless Steel Tough BoxDesign

  Rugged, all steel enclosure protects the turbine on the job and during transport

  Utility toolbox for separate tool and needle and nozzle storage

  On-Board Gun and Cup Holder stores gun when not in use

• Model: FinishPro
• Series: 9.5
• Product Series: ProComp

• Gun Included: 1

• Includes: EDGE II Plus Gun, 2 qt Remote Cup, 5 ft Material and Air Hose, Shoulder Strap, 32 oz FlexLiner System, #3 Quick-Release Fluid Set, #4 Quick-Release Fluid Set, #5 Quick-Release Fluid Set, 30 ft Super-Flex Air Hose, 4 ft Whip Hose, Automotive Main Filter

• Maximum Air Inlet Pressure (bar): 1
• Maximum Air Inlet Pressure (kPa): 10
• Maximum Air Inlet Pressure (psi): 9.5

• Maximum Hose Length (ft): 60
• Maximum Hose Length (m): 18.0

• Maximum Working Pressure (bar): 0.7
• Maximum Working Pressure (kPa): 70
• Maximum Working Pressure (psi): 10

• Product Type: Spray Package

• Recommended Annual Usage: Up to 50

GG 17N040

GG 17L796

KIT,REPAIR,PACKINGS

Graco 17L796 UHMWPE and PTFE Packings Repair Kit, Dura-Flo 1800, standard for 68705

KIT INCLUDES: GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE, GRAPHITE/TFE DURA [QTY. 2], GLAND, PACKING, MALE [QTY. 1], GLAND, PACKING, FEMALE [QTY. 1], PACKING, VEE, GRAPHITE/TFE [QTY. 2], PACKING, VEE [QTY. 3], PACKING, VEE [QTY. 3], PACKING, O-RING [QTY. 1], SEAL, ACETAL [QTY. 2], PACKING, O-RING [QTY. 1]

• Bell Cup Edge Type: Serrated
• Bell Cup Material: Aluminum Standard
• Bell Cup Size (cm): 5
• Bell Cup Size (in): 2.0
• Bell Cup Size (mm): 50

• Compatible Paint Type: Solventborne

GG 17L332

GG 17L928

GG 17N266

FINISHPRO HVLP SPRAYER, 9.0, PRO CONTRACTOR

Graco 17N266 FinishPro HVLP 9.0 ProContractor Series Sprayer

The FinishPro HVLP 9.0 ProContractor Series sprayer is loaded with features that provide on-demand power control and easier operation with independent material, air and spray fan controls to increase productivity on small to medium-sized fine finish jobs.

• TurboForce Technology

  Exclusive, proprietary turbine design builds more pressure through each stage, resulting in more performance at the gun

  More air flow and air pressure means higher production with less thinning of material

  Generates less heat and provides longer turbine life

• SmartStart Turbine

  Automatically shuts off when not in use - if you're not spraying, it's not running

  Reduces jobsite noise, resulting in less fatigue

  Automatic shut-off reduces heat and extends turbine life

• TurboControl System with LED Display

  Adjust the TurboForce turbine speed to match the performance you require

  Reduces heat build up

  Runs quieter

  Extends turbine system life

  50% longer hoses

• EDGE II Plus Gun

  Ultimate control with independent user controls for material volume, air flow, and spray fan size

  4X more productivity

  FlexLiner Bag System

  Learn more: EDGE II Plus Gun

• FlexLiner Bag System

  FlexLiner Paint Bag System replaces traditional material cups

  Spray at any angle with no adjustment - even upside down!

• Super-Flex Air Hose

  15% lighter weight than other leading brands for more control at the gun

  30 ft length included

  No tools needed to connect

• Stainless Steel Tough BoxDesign
  

  Rugged, all steel enclosure protects the turbine on the job and during transport

  Smaller and lighter than previous models

• Utility Toolbox

  Separate tool storage for extra needles and nozzles

• On-Board Gun and Cup Holder

  Holds gun when not in use

  Allows for easy paint refills with less spills

• Model: FinishPro
• Series: 9.0
• Product Series: ProContractor

• Gun Included: 1

• Includes: EDGE II Plus Gun, 32 oz FlexLiner System, #3 Quick-Release Fluid Set, #4 Quick-Release Fluid Set, 30 ft Super-Flex Air Hose, Automotive Main Filter

• Maximum Air Inlet Pressure (bar): 1
• Maximum Air Inlet Pressure (kPa): 10
• Maximum Air Inlet Pressure (psi): 9

• Maximum Hose Length (ft): 60
• Maximum Hose Length (m): 18.0

• Maximum Working Pressure (bar): 0.7
• Maximum Working Pressure (kPa): 70
• Maximum Working Pressure (psi): 10

• Product Type: Spray Package

• Recommended Annual Usage: Up to 50 gallons per year

GG 17N369

GG 17N712

GG 17N357

GG 17N415

GG 17N949

GG 17P009

GG 17P174

GG 17P186

KIT, PUMP, DC

Graco 17P186 Triax II Replacement Pump for Cordless Handheld

The Triax II triple piston pump gives you the most reliable performance in the industry and full tip support. It is built from durable stainless steel and carbide components and bonded with a high strength polymer for the most durable, lightest weight pump. Innovative drop-in on-the-job Triax II Pump Replacement with ProConnect lets you replace your modular pump right on the job.

• Triax II Triple Piston Pump
  

  Pump 3X more gallons before service

  Clean up in minutes

  No inlet check valve to get stuck - prime and spray in seconds

  Fast, on-the-job pump replacement with ProConnect

• Model: Triax
• Series: II

• For Use With: Cordless Ultra Airless Handheld

• Number of Pieces: 1

GG 17P185

KIT, PUMP, AC

Graco 17P185 Triax II Replacement Pump for Corded Handheld

The Triax II triple piston pump gives you the most reliable performance in the industry and full tip support. It is built from durable stainless steel and carbide components and bonded with a high strength polymer for the most durable, lightest weight pump. Innovative drop-in on-the-job Triax II Pump Replacement with ProConnect lets you replace your modular pump right on the job.

• Triax II Triple Piston Pump
  • Pump 3X more gallons before service
  • Clean up in minutes
  • No inlet check valve to get stuck - prime and spray in seconds
  • Fast, on-the-job pump replacement with ProConnect

• Model: Triax
• Series: II

• For Use With: Corded Ultra Airless Handheld

• Number of Pieces: 1

GG 17P212

GG 17P484

EDGE II GUN, HVLP, PLUS, CUP, PKG

Graco 17P484 EDGE II Plus Gun with Metal Cup

Maximize your spraying performance with the innovative HVLP EDGE II Plus Gun. Cutting edge technology such as intuitive gun controls, Quick Release fluid set, and optimized air pressure and airflow will help you achieve the highest quality finish available in fine finish spraying.

• Integrated Flow Control

  Combines material and air flow into one simple control

  Optimized to spray the majority of fine finish applications

  Quick adjustment with 360 degree rotation and indicator for repeatable spray setting

• Adjustable Air Cap

  3-position rotation to change spray pattern

  Conveniently located at the front of the gun

• Exclusive Quick Clean Check Valve

  Allows more air pressure into the material cup to spray heavier material

  Easily clean and reuse versus replace

  Located by gun to reduce clogged valves due to paint contamination

• Quick Release Needle Design

  Change out needles from the front of the gun with just a click

  Easy to change, easy to clean with no tools needed

  Remove front air cap and nozzle

  Slide trigger lever to release needle

  Pull needle out

• Model: HVLP
• Series: EDGE II Plus

• Compatible Material: Varnish, Enamel, Latex, Stains

• For Use With: FinishPro HVLP Sprayers

• Gun Activation: Manual
• Gun Type: HVLP Gun
• Gun Weight (oz): 20

• Includes: 1 qt (0.95 L) Metal Cup, #3 Quick Release Fluid Set

• Maximum Air Inlet Pressure (bar): 0.7
• Maximum Air Inlet Pressure (kPa): 70
• Maximum Air Inlet Pressure (MPa): 0.07
• Maximum Air Inlet Pressure (psi): 12
• Maximum Air Pressure (bar): 0.7

• Maximum Air Pressure (kPa): 70
• Maximum Air Pressure (MPa): 0.07
• Maximum Air Pressure (psi): 10

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

GG 233490

TRITON SPRAYER, SS DIA PUMP, WALL MNT

Graco 233490 Triton SST Spray Package, Wall, Air & Fluid Hoses, AirPro Conventional Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Conventional
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233484

TRITON SPRAYER, AL DIA PUMP, CART

Graco 233484 Triton Alum Spray Package, Cart, 60 psi Regulator, Suction, Air & Fluid Hoses, AirPro HVLP Gun .055 in (1.4 mm) Nozzle, Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: HVLP
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Cart Mount
• Mount Type: Cart Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233499

HOSE SET, BUNDLED

Graco 233499 Air/Fluid Hose, 25 ft (7.6 m) Stainless Steel Couplings, fits AirPro Spray Guns

GG 233477

TRITON SPRAYER, AL PUMP, STAND MNT

Graco 233477 Triton Alum Spray Package, Stand, 60 psi Regulator, Suction, Air & Fluid Hoses, AirPro HVLP Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: HVLP
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Stand Mount
• Mount Type: Stand Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233488

TRITON SPRAYER, SS DIA PUMP, WALL MNT

Graco 233488 Triton Stainless Steel Pump Package, wall mount, does not include applicator

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 0
• Gun Model: No Applicator
• Gun Technology: Bare Package
• Gun Type: No Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kg/cm 2): 7.03
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Bare Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233474

TRITON SPRAYER,SS PUMP,STAND MNT

Graco 233474 Triton Stainless Steel Pump Package, stand mount with suction hose. Does not include applicator.

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

GG 233480

TRITON SPRAYER, AL DIA PUMP, CART

Graco 233480 Triton Aluminum Pump Package, cart mount with suction hose. Does not include applicator.

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 0
• Gun Model: No Applicator
• Gun Technology: Bare Package
• Gun Type: No Applicator

• Includes: Suction Hose

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kg/cm 2): 7.03
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Cart Mount
• Mount Type: Cart Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Bare Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233501

TRITON PUMP,DIAPHRAGM,1:1 SST

Graco 233501 Triton Air-Operated Diaphragm Pump, Bare, SST, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials

GG 233741

TRITON SPRAYER, AL PUMP, PAIL MNT, ELECTRO

Graco 233741 Triton Alum Spray Package, Pail, 60 psi Fluid Regulator, Pro Xp40 Electrostatic Gun, Suction, Air & Fluid Hoses

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: Pro Xp 40 kV Standard
• Gun Technology: Electrostatic
• Gun Type: Electrostatic

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Pail Mount
• Mount Type: Pail Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233747

TRITON SPRAYER,AL PUMP,CART MNT,ELECTRO

Graco 233747 Triton Alum Spray Package, Cart, 60 psi Fluid Regulator, Pro Xp60 Electrostatic Gun, Suction, Air & Fluid Hoses

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

GG 233491

TRITON SPRAYER, AL DIA PUMP, WALL MNT

Graco 233491 Triton Alum Spray Package, Wall, 60 psi Regulator, Air & Fluid Hoses, AirPro HVLP Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: HVLP
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233492

TRITON SPRAYER, SS DIA PUMP, WALL MNT

Graco 233492 Triton SST Spray Package, Wall, 100 psi Regulator, Air & Fluid Hoses, AirPro HVLP Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: HVLP
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233583

GG 233746

TRITON SPRAYER, AL PUMP, CART MNT, ELECTRO

Graco 233746 Triton Alum Spray Package, Cart, 60 psi Fluid Regulator, Pro Xp40 Electrostatic Gun, Suction, Air & Fluid Hoses

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: Pro Xp 40 kV Standard
• Gun Technology: Electrostatic
• Gun Type: Electrostatic

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Cart Mount
• Mount Type: Cart Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 233500

TRITON PUMP,DIAPHRAGM,1:1 ALUMINUM

Graco 233500 Triton Air-Operated Diaphragm Pump, Bare, Aluminum, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials

GG 233749

TRITON SPRAYER,AL PUMP,WALL MNT,ELECTRO

Graco 233749 Triton Alum Spray Package, Wall, 60 psi Fluid Regulator, Pro Xp60 Electrostatic Gun, Air & Fluid Hoses

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes Delivers a consistent spray pattern and uniform film thickness
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: Catalyst, Waterborne

GG 233760

REGULATOR, PRESSURE, P60-VP DN7

Graco 233760 High Pressure Pneumatic Fluid Regulator, 5000 psi (360 bar) max fluid inlet pressure, 70-900 psi (5-60 bar) regulated pressure range

For use in air-assisted spray systems to ensure accurate, positive control of fluid pressure to a spray gun, dispensing valve, or atomizing head.

• Actuation Type: Air

GG 233757

REGULATOR, PRESSURE, P20-VM

Graco 233757 Mechanical Fluid Pressure Regulator, 580 psi max inlet pressure, 15-290 psi pressure range

For use in air-assisted spray systems to ensure accurate, positive control of fluid pressure to a spray gun, low pressure dispensing valve, or atomizing head.

• Actuation Type: Spring

GG 233776

TRITON PUMP,DIAPHRAGM,1:1,AL BSPP

Graco 233776 Triton Air-Operated Diaphragm Pump, Bare, Aluminum, BSPP

Effective alternative to traditional pressure pots and standard diaphragm pumps

• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials

GG 233809

REGULATOR, PRESSURE, P10-VP, OEM

Graco 233809 Low Pressure Pneumatic Fluid Regulator, 580 psi (40 bar) max fluid inlet pressure, 6-145 psi (0.4-10 bar) regulated pressure range

Our pneumatically operated fluid pressure regulators are designed primarily for use with highly viscous coatings

GG 233807

VALVE, METERED, GREASE

Graco 233807 Standard Nozzle Extension and 1/4 in. NPT Inlet, U.S. Measurement, Includes Extension and Hydraulic Coupler NLGI#2

Designed to perform in heavy-equipment shops, fleet maintenance

shops, municipal garages and higher-volume in-plant applications

with longer plumbing runs and larger fluid usage.

Application: Typical applications include heavy-duty dealerships, fleet service facilities, in-plant, lube trucks, and mining.

• Easy-to-Read LCD
• Easily reset electronic display.
• Accurate Grease Metering
• Handles Pressure up to 5,000 psi (345 bar)
• Flow up to 36 oz/min (1 kg/min).

• Approvals: CE

• Compatible Material: Grease

• Dispense Type: Manual

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Extension, Hydraulic Coupler
• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPTF

• Maximum Operating Temperature ( degree C): 60
• Maximum Operating Temperature ( degree F): 140

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000
• Meter Accuracy (%): plus/minus 00.3
• Meter Technology: Oval Gears

• Metering Gun Weight (kg): 1.0
• Metering Gun Weight (lb): 2.2

• Nozzle Type: Rigid

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPTF

• Overall Height (cm): 22.35
• Overall Height (in): 8.8
• Overall Height (mm): 223.5
• Overall Length (cm): 8.13
• Overall Length (in): 3.2
• Overall Length (mm): 81.28
• Overall Width (cm): 4.572
• Overall Width (in): 1.8
• Overall Width (mm): 45.72

• Power Type: Electric

• Recommended Environment: Indoor

GG 233810

REGULATOR, PRESSURE, P10-RP

Graco 233810 Pneumatic Back Pressure Regulator, Model P10-RP, 145 psi (10 bar) max permanent supply pressure, 15-145 psi regulated pressure range

Limits the supply pressure to a set value by opening an outlet and guiding back excess material when the predetermined pressure has been achieved. Used in circulating systems.

GG 233833

KIT, REPAIR, SEAL

Graco 233833 Seal Repair Kit for Merkur 050 Displacement Pump

GG 233841

KIT, REPAIR, SHAFT, 308HP

Graco 233841 Shaft Repair Kit for 308H Diaphragm Pumps

GG 233933

VALVE, METERED, GREASE, METRIC

Graco 233933 Standard Nozzle Extension and 1/4 in. NPT Inlet, Metric Measurement, Includes Extension and Hydraulic Coupler

Designed to perform in heavy-equipment shops, fleet maintenance

shops, municipal garages and higher-volume in-plant applications

with longer plumbing runs and larger fluid usage.

Application: Typical applications include heavy-duty dealerships, fleet service facilities, in-plant, lube trucks, and mining.

• Easy-to-Read LCD
• Easily reset electronic display.
• Accurate Grease Metering
• Handles Pressure up to 5,000 psi (345 bar)
• Flow up to 36 oz/min (1 kg/min).

• Approvals: CE

• Compatible Material: Grease

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Extension, Hydraulic Coupler
• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPTF

• Maximum Operating Temperature ( degree C): 60
• Maximum Operating Temperature ( degree F): 140

• Maximum Storage Temperature ( degree C): 70
• Maximum Storage Temperature ( degree F): 158

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000
• Meter Accuracy (%): plus/minus 00.3
• Meter Technology: Oval Gears

• Metering Gun Weight (kg): 1.0
• Metering Gun Weight (lb): 2.2

• Nozzle Type: Rigid

• Outlet Size (cm): 0.32
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.18
• Outlet Thread Type: NPTF

• Overall Height (cm): 22.35
• Overall Height (in): 8.8
• Overall Height (mm): 223.5
• Overall Length (cm): 8.13
• Overall Length (in): 3.2
• Overall Length (mm): 81.28
• Overall Width (cm): 4.572
• Overall Width (in): 1.8
• Overall Width (mm): 45.72

• Power Type: Hydraulic

• Recommended Environment: Indoor

GG 234017

GG 233777

TRITON PUMP,DIAPHRAGM,1:1,SST BSPP

Graco 233777 Triton Air-Operated Diaphragm Pump, Bare, SST, BSPP

Effective alternative to traditional pressure pots and standard diaphragm pumps

• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials

GG 234097

GG 234098

GG 234100

GG 234106

KIT, ACCY, REMOTE, G3000HR

Graco 234106 Remote G3000HR Flow Meter Installation Kit

Includes G3000HR Flow Meter with 50 ft. sensor cable

GG 234118

KIT, REPAIR, TANK, SURGE

GG 234131

GG 234255

GG 234257

REGULATOR, PRESS, P10-RP, NPT

Graco 234257 Low Back Pressure Fluid Regulator, 145 Max psi, 15-145 psi Range, 4.6 GPM, SST, Air Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Limits the supply pressure to a set value by opening an outlet and guiding back excess material when the predetermined pressure has been achieved. Used in circulating systems.

• Gauge Port Size (cm): 0.3175
• Gauge Port Size (in): 1/8
• Gauge Port Size (mm): 3.175

• Gauge Port Type: BSPP

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 10
• Maximum Air Inlet Pressure (kPa): 100
• Maximum Air Inlet Pressure (psi): 145

• Maximum Flow Rate (GPM): 4.6
• Maximum Flow Rate (L/min): 17.5

• Maximum Regulated Pressure (bar): 10
• Maximum Regulated Pressure (kPa): 1000
• Maximum Regulated Pressure (psi): 145

• Maximum Working Pressure (bar): 10
• Maximum Working Pressure (kPa): 1000
• Maximum Working Pressure (psi): 145

• Minimum Regulated Pressure (bar): 1
• Minimum Regulated Pressure (kPa): 100
• Minimum Regulated Pressure (MPa): 0.1
• Minimum Regulated Pressure (psi): 15

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234259

REGULATOR, PRESS, P250-VP, NPT

Graco 234259 High Pressure Pneumatically Adjustable Fluid Regulator, 580-3625 psi Max Pressure, 11 GPM, SST, Air Type, 3/4 (f) x 3/4 (f)

Fluid regulators keep your system functioning more productively.

• Available with mechanical control or pneumatic control
• Suitable for fluids with low and high viscosities
• Models available with wetted parts made of stainless steel

• Actuation Type: Air

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 10.6
• Maximum Flow Rate (L/min): 40.13

• Maximum Regulated Pressure (bar): 250
• Maximum Regulated Pressure (kPa): 25000
• Maximum Regulated Pressure (MPa): 25
• Maximum Regulated Pressure (psi): 3600

• Maximum Working Pressure (bar): 360
• Maximum Working Pressure (kPa): 36000
• Maximum Working Pressure (MPa): 36
• Maximum Working Pressure (psi): 5000

• Minimum Regulated Pressure (bar): 40
• Minimum Regulated Pressure (kPa): 4000
• Minimum Regulated Pressure (MPa): 4
• Minimum Regulated Pressure (psi): 600

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234260

REGULATOR, PRESS, P100-VM, NPT

Graco 234260 High Pressure Fluid Regulator, 2600 Max psi, 600-1500 psi Range, 8.1 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f)

Mechanically operated fluid pressure regulators designed primarily for use with low to medium viscosity fluids.

• Actuation Type: Spring

• Includes: Gauge
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 8.1
• Maximum Flow Rate (L/min): 30.66

• Maximum Regulated Pressure (bar): 100
• Maximum Regulated Pressure (kPa): 10000
• Maximum Regulated Pressure (MPa): 10
• Maximum Regulated Pressure (psi): 1500

• Maximum Working Pressure (bar): 180
• Maximum Working Pressure (kPa): 18000
• Maximum Working Pressure (MPa): 18
• Maximum Working Pressure (psi): 2600

• Minimum Regulated Pressure (bar): 40
• Minimum Regulated Pressure (kPa): 4000
• Minimum Regulated Pressure (MPa): 4
• Minimum Regulated Pressure (psi): 600

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234261

REGULATOR, PRESS, P20-RM DN1, NPT

Graco 234261 Low Back Pressure Fluid Regulator, 290 Max psi, 15-290 psi Range, 5.7 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Limits the supply pressure to a set value by opening an outlet and guiding back excess material when the predetermined pressure has been achieved. Used in circulating systems.

• Gauge Port Size (cm): 0.3175
• Gauge Port Size (in): 1/8
• Gauge Port Size (mm): 3.175

• Gauge Port Type: BSPP

• Includes: Regulator Only
• Inlet Size (cm): 2.54
• Inlet Size (in): 1
• Inlet Size (mm): 25.4

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 5.7
• Maximum Flow Rate (L/min): 21.7

• Maximum Regulated Pressure (bar): 20
• Maximum Regulated Pressure (kPa): 2000
• Maximum Regulated Pressure (psi): 290

• Maximum Working Pressure (bar): 20
• Maximum Working Pressure (kPa): 2000
• Maximum Working Pressure (psi): 290

• Minimum Regulated Pressure (bar): 2
• Minimum Regulated Pressure (kPa): 200
• Minimum Regulated Pressure (MPa): 0.2
• Minimum Regulated Pressure (psi): 29

• Outlet Size (cm): 2.54
• Outlet Size (in): 1
• Outlet Size (mm): 25.4

GG 234263

REGULATOR, PRESS, P20-VM, NPT

Graco 234263 Low Pressure Fluid Regulator, 580 Max psi, 15-290 psi Range, 7.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Mechanically operated fluid pressure regulators designed primarily for use with low to medium viscosity fluids.

GG 234265

REGULATOR, PRESS, P270-VM, NPT

Graco 234265 High Pressure Fluid Regulator, 5000 Max psi, 1300-4000 psi Range, 9.2 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f)

Mechanically operated fluid pressure regulators designed primarily for use with low to medium viscosity fluids.

GG 234267

REGULATOR, PRESS, P50-VM, NPT

Graco 234267 Low Pressure Fluid Regulator, 1015 Max psi, 145-725 psi Range, 9.8 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Mechanically operated fluid pressure regulators designed primarily for use with low to medium viscosity fluids.

• Actuation Type: Spring

• Gauge Port Size (cm): 0.3175
• Gauge Port Size (in): 1/8
• Gauge Port Size (mm): 3.175

• Gauge Port Type: BSPP

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 9.8
• Maximum Flow Rate (L/min): 37.1

• Maximum Regulated Pressure (bar): 50
• Maximum Regulated Pressure (kPa): 5000
• Maximum Regulated Pressure (MPa): 5.0
• Maximum Regulated Pressure (psi): 725

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 70
• Maximum Working Pressure (kPa): 7000
• Maximum Working Pressure (MPa): 7
• Maximum Working Pressure (psi): 1015

• Minimum Regulated Pressure (bar): 10
• Minimum Regulated Pressure (kPa): 1000
• Minimum Regulated Pressure (MPa): 1.0
• Minimum Regulated Pressure (psi): 145

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234269

REGULATOR, PRESS, P200-RM, NPT

Graco 234269 High Pressure Fluid Back Pressure Regulator, 3400 Max psi, 1300-3000 psi Pressure Range, 13.1 GPM, SST, Spring Type, 3/8(f) x 3/8(f)

• Tungsten and carbide materials ensure low wear and long life
• Plated carbon steel housing is compatible with solvent-borne materials
• Laser-marked indication lines for easy pressure adjustment and process control

• Actuation Type: Spring

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 13.1
• Maximum Flow Rate (L/min): 49.59

• Maximum Regulated Pressure (bar): 200
• Maximum Regulated Pressure (kPa): 20000
• Maximum Regulated Pressure (MPa): 20.7
• Maximum Regulated Pressure (psi): 3000

• Maximum Working Pressure (bar): 235
• Maximum Working Pressure (kPa): 23500
• Maximum Working Pressure (MPa): 23.5
• Maximum Working Pressure (psi): 3400

• Minimum Regulated Pressure (bar): 90
• Minimum Regulated Pressure (kPa): 9000
• Minimum Regulated Pressure (MPa): 9
• Minimum Regulated Pressure (psi): 1300

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234270

REGULATOR, PRESS, P150-VP DN7, NPT

Graco 234270 High Pressure Fluid Regulator, 5000 Max psi, 300-2000 psi Range, 11.7 GPM, SST, Air Type, 3/4 (f) x 3/4 (f), 1/4 BSPP Port

Our pneumatically operated fluid pressure regulators are designed primarily for use with highly viscous coatings

GG 234272

REGULATOR, PRESS, P10-VP, NPT

Graco 234272 Low Pressure Fluid Regulator, 580 Max psi, 6-145 psi Range, 7.0 GPM, SST, Air Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Our pneumatically operated fluid pressure regulators are designed primarily for use with highly viscous coatings

• Actuation Type: Air

• Gauge Port Size (cm): 0.3175
• Gauge Port Size (in): 1/8
• Gauge Port Size (mm): 3.175

• Gauge Port Type: BSPP

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 7
• Maximum Flow Rate (L/min): 26.5

• Maximum Regulated Pressure (bar): 10
• Maximum Regulated Pressure (kPa): 1000
• Maximum Regulated Pressure (MPa): 1.0
• Maximum Regulated Pressure (psi): 145

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 40
• Maximum Working Pressure (kPa): 4000
• Maximum Working Pressure (MPa): 4
• Maximum Working Pressure (psi): 580

• Minimum Regulated Pressure (bar): 0.4
• Minimum Regulated Pressure (kPa): 40
• Minimum Regulated Pressure (MPa): 0.04
• Minimum Regulated Pressure (psi): 6

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234273

REGULATOR, PRESS, P10-VM, NPT

Graco 234273 Low Pressure Fluid Regulator, 580 Max psi, 15-145 psi Range, 7.0 GPM, SST, Spring Type, 3/8 (f) x 3/8 (f), 1/8 in BSPP Port

Mechanically operated fluid pressure regulators designed primarily for use with low to medium viscosity fluids.

• Actuation Type: Spring

• Gauge Port Size (cm): 0.3175
• Gauge Port Size (in): 1/8
• Gauge Port Size (mm): 3.175

• Gauge Port Type: BSPP

• Includes: Regulator Only
• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 7
• Maximum Flow Rate (L/min): 26.5

• Maximum Regulated Pressure (bar): 10
• Maximum Regulated Pressure (kPa): 1000
• Maximum Regulated Pressure (MPa): 1.0
• Maximum Regulated Pressure (psi): 145

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 40
• Maximum Working Pressure (kPa): 4000
• Maximum Working Pressure (MPa): 4
• Maximum Working Pressure (psi): 580

• Minimum Regulated Pressure (bar): 1
• Minimum Regulated Pressure (kPa): 10
• Minimum Regulated Pressure (MPa): 100
• Minimum Regulated Pressure (psi): 15

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525

GG 234390

GG 234418

SHARPE MEMBRANE SYSTEM,DRYAIRE ,GRACO

Graco 234418 Sharpe Membrane Air Drying System, 175psi, 30/70/100/108CFM

• Membrane eliminates the cost and maintenance of desiccant systems
• Ensures equipment is supplied with clean, dry air
• Multi-stage filter removes particles down to 0.01 micron Membrane removes moisture from air
• Includes shut-off valve and pressure regulator
• Filter indicator signals replacement to ensure optimal efficiency

• Model: Sharpe

• Air Inlet Size (cm): 1.27
• Air Inlet Size (in): 1/2
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT
• Air Outlet Gender: Female

• Air Outlet Size (cm): 1.27
• Air Outlet Size (in): 1/2
• Air Outlet Size (mm): 12.7
• Air Outlet Thread Type: NPT

GG 234578

GG 234772

GG 234912

TRITON SPRAYER, DP, PAIL MOUNT

Graco 234912 Triton SST Spray Package, Pail, 100 psi Regulator, Suction, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Pail Mount
• Mount Type: Pail Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234913

TRITON SPRAYER,DIA PUMP,STAND MNT

Graco 234913 Triton Alum Spray Package, Stand, 60 psi Regulator, Suction, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

GG 234914

TRITON SPRAYER, DIA PUMP, STAND MNT

Graco 234914 Triton SST Spray Package, Stand, 100 psi Regulator, Suction, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Stand Mount
• Mount Type: Stand Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234915

TRITON SPRAYER, DIA PUMP, CART MOUNT

Graco 234915 Triton Alum Spray Package, Cart, 60 psi Regulator, Suction, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kg/cm 2): 7.03
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Cart Mount
• Mount Type: Cart Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234916

TRITON SPRAYER, DIA PUMP, CART MOUNT

Graco 234916 Triton SST Spray Package, Cart, 100 psi Regulator, Suction, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Feed Type: Suction Hose

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Cart Mount
• Mount Type: Cart Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234917

TRITON SPRAYER, DIA PUMP, WALL MNT

Graco 234917 Triton Alum Spray Package, Wall, 60 psi Regulator, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234918

TRITON SPRAYER, DIA PUMP, WALL MNT

Graco 234918 Triton SST Spray Package, Wall, 100 psi Regulator, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle for Metal Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

• Superior finish quality for conventional, HVLP and compliant or electrostatic applications
• Supplies up to 35% extra air flow to gun for superior atomization
• Saves material and time during flushing, priming and color changes
• Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

• Model: Triton
• Series: 308

• Application: Metal

• Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Type: NPT

• Gun Included: 1
• Gun Model: AirPro
• Gun Technology: Compliant
• Gun Type: Air Spray

• Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 8.5
• Maximum Flow Rate (L/min): 32

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Mount Location: Wall Mount
• Mount Type: Wall Mount

• Power Source: Air

• Pressure Type: Low Pressure
• Product Type: Spray Package

• Pump Ratio: 1:1
• Pump Type: Pneumatic Diaphragm Pump

GG 234577

GG 234961

GG 234958

VALVE, VENT, FOLLOWER PLATE

GG 235205

STEM, VALVE

GG 235460

GUN, SILVER, FLAT TIP

Graco 235460 Silver Plus Airless Spray Gun, 2 Finger Trigger, Flat Tip

The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a Flat Tip Guard.

• Rugged Design
  • Durable forged aluminum withstands harsh work environments
  • Lighter weight than competitive guns Polished body is easy to clean
• Exclusive Needle Design
  • Factory set needle needs no trigger adjustments
  • Guaranteed for life against breakage
  • Maximum performance and long life
• Stainless Steel Fluid Tube
  • Fluid flows directly to the tip through the gun fluid tube
  • Provides the ability to spray heavier materials
  • Including high solid coatings and mastics

• Model: Silver Plus
• Series: Airless Spray Gun

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Body Material: Aluminum

• Compatible Material: Paint, Coating
• Component A Inlet Size (cm): 0.635

• Component A Inlet Size (in): 1/4
• Component A Inlet Size (mm): 6.35
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.229
• Fluid Orifice Size (in): 0.090
• Fluid Orifice Size (mm): 2.29

• For Use With: High Pressure Application

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Airless Gun
• Gun Weight (g): 510
• Gun Weight (kg): 0.51
• Gun Weight (lb): 1.125
• Gun Weight (oz): 18

• Includes: Flat Tip Guard

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

• Product Type: Spray Gun

• Purge Method: Liquid

GG 235464

GG 235071

GG 235339

GG 234962

GG 234938

GG 235072

HOSE, COUPLED

Graco 235072 Grounded Air Hose with stainless steel braid ground path (Red)- 0.315 in. (8 mm) ID, 1/4 npsm(f) x 1/4 npsm(f) left-hand thread, 50 ft (15 m) length

GG 235475

GG 235004

KIT, STRAINER

Graco 235004 Inlet Strainer, Nylon Cap, 3/4 in

Using an Inlet Strainer is the easiest way to maximize spray performance while also saving time and money by extending the life of your equipment and reducing down time.

• Model: Graco

• For Use With: ST, STX, 295 ST, 395/495 ST Pro Stand, 455/495 ST Lo-Boy, Ultra Max 695/795 Lo-Boy, GM3000 Lo-Boy, 390/395/450/455/490/495 ST Stand, Ultra 600 Lo-Boy

• Inlet Size (cm): 1.905
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: UNF