Airpower | GRACO INC. S10595 branded products

GG 114829

MANUAL PUMP, LEVER

Graco 114829 Lever Pump for 16 Gallon (60 Liter) or 55 Gallon (200 Liter) Drums - 0.1 Gallon (0.4 Liter) per Downstroke

Application: For transferring petroleum-based and synthetic oils, antifreeze, and non-corrosive chemicals

Application: Industrial

Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze, Non-Corrosive Chemicals

$105.50

GG 114654

TRANSFORMER 120V

$89.75

GG 114189

Valve

$734.00

GG 114830

Washer, Flat

$35.60

GG 115158

Filter, Gun

$13.30

GG 115712

Valve, Solenoid, 240V

$519.00

GG 115244

Nut

$5.45

GG 115099

WASHER GARDEN HOSE

Hose Washer Inlet Seal Replace a worn or damaged inlet seal with genuine Graco parts. Refer to the parts manual for your sprayer to ensure part compatibility Graco’s dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. High quality parts have years of service, but wear parts will need replacement over time. Use Genuine Graco parts to keep your sprayer in peak working order for years to come. Graco Tech Support can further assist with troubleshooting sprayer operation

$0.30

Valve, Pilot, 4 Way Dual Air

GG 115793

Valve, Pilot, 4 Way Dual Air

$260.00

Insert, Male

GG 115860

Insert, Male

$30.40

PACKING, SQUARE RING

GG 115055

PACKING, SQUARE RING

$3.00

Packing O-Ring

GG 115078

Packing O-Ring

$5.25

Air Regulator, 1/4 Npt

GG 115243

Air Regulator, 1/4 Npt

$50.50

GL-1 INJECTOR, FOUR POINT

GG 114904

GL-1 INJECTOR, FOUR POINT

GL-1™ Grease Injectors - 4 Injectors and Manifold

Custom fit your system with Graco's adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

High volume output at high pressures for the most demanding applications The GL-1 injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications Includes an adjustable hex head nut to make adjusting the output simple No vent holes and fully enclosed press fittings to prevent leaking lubricant Convenient top-mounted cycle pin indicator for quick confirmation that the injector is functioning properly Rugged, single piece uni-body design built for the harshest environments

$515.00

VALVE, PRESSURE RELIEF

GG 115122

VALVE, PRESSURE RELIEF

Graco 115122 Pressure Relief Valve to Atmosphere, 1/8” NPT male, 4,000 psi (276 bar)

Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.

No time or effort required for reset after blockage is cleared
Easy information on blocked lines, high system pressure or blocked bearings
Works with MSP, MX, MXP, MJ and MHH divider valves

Application: In-Plant Machinery, Off-Road Equipment

Compatible Material: Grease
Maximum Working Pressure (bar): 276
Maximum Working Pressure (kPa): 27600
Maximum Working Pressure (MPa): 28
Maximum Working Pressure (psi): 4000

$57.75

Manifold, Gl-1, 1Point, Bare Npt

GG 114911

Manifold, Gl-1, 1Point, Bare Npt

$99.25

Lubricant, Synthetic, Grease

GG 115982

LUBRICANT, SYNTHETIC,GREASE

$51.25

Connector, Male, Crimp

GG 115862

Connector, Male, Crimp

$6.35

O-Ring Packing

GG 115938

O-Ring Packing

$6.10

Packing O-Ring

GG 115066

PACKING, O-RING

$101.50

Ball, Carbide

GG 116166

Ball, Carbide

$18.50

Strainer, Suction

GG 115965

Strainer, Suction

$24.90

SWITCH, PRESSURE

GG 115124

SWITCH, PRESSURE

High, Low Adjustable Pressure Switch, Single Post

High-low, adjustable pressure switches

For use with single line, parallel, injector based automatic lubrication systems Single post pressure switch Lubriquip part number 507-507-000 Trabon part number 7507

$680.00

Heater, Cartridge, 500W, 230V

GG 116010

Heater, Cartridge, 500W, 230V

$1,695.00

GL-1 INJECTOR, ONE POINT

GG 114901

GL-1 INJECTOR, ONE POINT

Graco 114901 GL-1™ Grease Injector - 1 Injector and Manifold

Custom fit your system with Graco&prime, s adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

Application: High volume output at high pressures for the most demanding applications

The GL-1 injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
Includes an adjustable hex head nut to make adjusting the output simple
No vent holes and fully enclosed press fittings to prevent leaking lubricant
Rugged, single piece uni-body design built for the harshest environments

Model: GL-1
Adjustable: Adjustable

Application: In-Plant Machinery, Off-Road Equipment
Compatible Material: Grease
Compatible Metering Device: Single Line Parallel
Cycle Indicator: Visual
Dispense Outlet Size (cm): 0.33
Dispense Outlet Size (in): 0.13
Dispense Outlet Size (mm): 3.3
Dispense Outlet Thread Type: NPT
For Use With: Single Line Parallel Automatic Lubrication Systems
Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525
Inlet Thread Type: NPT
Maximum NLGI Grade: #2
Maximum Operating Pressure (psi): 3500
Maximum Output Volume (in³): 0.08
Maximum Reset Pressure (psi): 600
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500
Minimum Operating Pressure (psi): 1850
Minimum Output Volume (in³): 0.008
Outlet Size (cm): 0.9525
Outlet Size (in): 3/8
Outlet Size (mm): 9.525
Outlet Thread Type: NPT

$219.00

Packing

GG 114849

Packing

Call for pricing

Screw, Socket, FLHD

GG 115439

Screw, Socket, FLHD

$4.75

Screw Cap, Bttn Hd, 8-32

GG 116195

Screw Cap, Bttn Hd, 8-32

$4.00

FERRULE FUSE

GG 116225

FERRULE FUSE

$105.00

Relay, Solid State, 20A

GG 116204

Relay, Solid State, 20A

Call for pricing

SCREW, GROUND

GG 116343

SCREW, GROUND

$2.00

Spring, Gas

GG 116349

Spring, Gas

$414.00

Screw, Button HD, SC, M6 X 60

GG 116412

Screw, Button HD, SC, M6 X 60

$7.50

Valve, Air Bleed

GG 116473

Valve, Air Bleed

$61.50

Adapter, Elbow

GG 116401

Adapter, Elbow

$16.10

Retaining Ring

GG 116550

Retaining Ring

$11.60

Lubricant, Dielectric Grease, Es Gun

GG 116553

LUBRICANT, DIELECTRIC GREASE, ES GUN

Graco 116553 Dielectric grease, 1 oz (30 ml)

$40.60

CLEANER, SURFACE, HORIZONTAL

GG 116562

CLEANER, SURFACE, HORIZONTAL

Graco 116562 Horizontal Surface Cleaner, 20 in

Application: For use with G-Force II Pressure Washers

Model: Graco

For Use With: G-Force II Pressure Washer
Maximum Fluid Pressure (bar): 280
Maximum Fluid Pressure (kPa): 28000
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000
Maximum Fluid Pressure (bar): 280
Maximum Fluid Pressure (kPa): 28000
Maximum Fluid Pressure (MPa): 28
Maximum Fluid Pressure (psi): 4000
Overall Diameter (cm): 51
Overall Diameter (in): 20
Overall Diameter (mm): 508

$741.00

PACKING, O-RING

GG 116586

PACKING, O-RING

$27.90

Heater, 240 Volt X 200 Watt

GG 116614

Heater, 240 Volt X 200 Watt

$209.00

Magnet

GG 116618

Magnet

$10.20

Kit, Repair, Regulator

GG 116634

Kit, Repair, Regulator

$66.50

Contact, Connector

GG 116640

Contact, Connector

$8.80

Valve, Safety, Relief, Air

GG 116643

Valve, Safety, Relief, Air

$58.25

Bushing, Strain Relief

GG 116673

Bushing, Strain Relief

$32.00

Cord, Flex

GG 116675

Cord, Flex

$50.75

Fitting, Barbed, Plated

GG 116746

Fitting, Barbed, Plated

$10.70

Filter, Screen, Suction, Hyd

GG 116919

Filter, Screen, Suction, Hyd

$47.30

Seal

GG 116905

Seal

$55.50

Screw, Cap, Socket Head

GG 116940

Screw, Cap, Socket Head

$5.90

Motor, Wheel

GG 116814

Motor, Wheel

$857.00

Washer

GG 117018

Washer

Call for pricing

Seal, Ring

GG 117085

Seal, Ring

$1.90

Compression Spring

GG 117089

Compression Spring

$6.15

Regulator Spring

GG 117090

Regulator Spring

$3.75

Spring, Compression

GG 117091

Spring, Compression

$6.15

Set Screw, SHDP, M6 X 20

GG 117098

Set Screw, SHDP, M6 X 20

$2.65

Threaded Plug

GG 117099

Threaded Plug

$18.40

Seal, Flat

GG 117103

Seal, Flat

$20.70

Ball 5Mm

GG 117104

Ball 5Mm

$9.80

Ball, 6 Mm

GG 117105

Ball, 6 Mm

$4.50

Ball, 6 Mm

GG 117106

Ball, 6 Mm

$11.40

Ball, 8 Mm

GG 117107

Ball, 8 Mm

$22.90

Seal

GG 117111

Seal

$98.25

SCREW, SHCS, M5 X 35

GG 117127

SCREW, SHCS, M5 X 35

$1.90

O-Ring

GG 117114

O-Ring

$1.90

Packing, Vee, UHMWPE

GG 117334

Packing, Vee, UHMWPE

$10.70

O-Ring

GG 117519

O-Ring

$26.30

Packing, O-Ring

GG 117283

Packing, O-Ring

$6.05

Oring

GG 117158

Oring

$5.85

Packing O-Ring

GG 117286

Packing O-Ring

$10.70

Packing, Vee, Leather

GG 117335

Packing, Vee, Leather

$19.90

Swivel

GG 117635

Swivel

$16.80

Vise, Pin

GG 117661

PIN, VISE

$61.75

O-Ring

GG 117724

O-Ring

$30.00

Rod Wiper

GG 117739

Rod Wiper

$5.25

Sensor

GG 117764

SENSOR, PRESS, SENSOTEC TRANS

$8,030.00

Fitting, Line, Air, 1/4Npt

GG 117509

Fitting, Line, Air, 1/4Npt

$16.80

Glove, Cond., Small, Box w/12Pr

GG 117823

GLOVE, COND.,SMALL,BOX W/12PR

Graco 117823 Conductive Gloves, box of 12, size small

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne

$389.00

Gasket, Coated

GG 117574

Gasket, Coated

$278.50

Glove, Cond, Medium, Bx w/12Pr

GG 117824

GLOVE, COND,MEDIUM,BX W/12PR

Graco 117824 Electrostatic Conductive Gloves, Box of 12- Medium

$397.00

Kit, O-Ring, Ptfe, Encapulated

GG 117828

Kit, O-Ring, Ptfe, Encapulated

$22.40

O_Ring, Nitrile

GG 117159

O_Ring, Nitrile

$6.25

Packing, U-Cup

GG 118106

Packing, U-Cup

$64.75

O-RING

GG 117336

O-RING

$10.70

WASHER, GUN

GG 117438

WASHER, GUN

Graco 117438 Professional Gun Washer, Premium

Corrosion resistant materials
Industrial strength construction
Cleans 2 guns and 2 cups in one minute
Pot cleaning kit available
Flow-through brush/wand for manual cleaning
5 gallon internal reservoir
High quality Graco pump for reliability
Fume extractor
Automatic timer
FM Approved

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

For Use With: Pro Xp electrostatic gun, AirPro air spray gun, G15/G40 air assist gun
Includes: Long Gun Support, Short Gun Support, Spray Nozzle

$10,000.00