Diaphragm

GG 659819

HUSKY PUMP, 3300S-E A04CS1SSPTPTPT

Graco 659819 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659820

HUSKY PUMP, 3300S-E A04CS1SPSPSPPT

Graco 659820 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659821

HUSKY PUMP, 3300S-E A04CS1GEGEGEBN

Graco 659821 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659822

HUSKY PUMP, 3300S-E A04CS2SSPTPTPT

Graco 659822 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 552
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 833

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659823

HUSKY PUMP, 3300S-E A04CS2SPSPSPPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659824

HUSKY PUMP, 3300S-E A04CS2GEGEGEBN

Graco 659824 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659825

HUSKY PUMP, 3300S-E A04DS1SSPTPTPT

Graco 659825 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp CID1 Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 552
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 833

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 552
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.7

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659831

HUSKY PUMP, 3300S-E A04AS51SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659832

HUSKY PUMP, 3300S-E A04AS51SPSPSPPT

Graco 659832 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659833

HUSKY PUMP, 3300S-E A04AS51GEGEGEBN

Graco 659833 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659834

HUSKY PUMP, 3300S-E A06AS51SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, Cntr Port Flange, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659835

HUSKY PUMP, 3300S-E A06AS51SPSPSPPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659836

HUSKY PUMP, 3300S-E A06AS51GEGEGEBN

Graco 659836 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, Cntr Port Flange, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): None
• Air Inlet Thread Gender: None
• Air Inlet Thread Type: None

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659837

HUSKY PUMP, 3300S-E A94GS51SSPTPTPT

Graco 659837 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, Cntr Port Flange, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659838

HUSKY PUMP, 3300S-E A94GS51SPSPSPPT

Graco 659838 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659839

HUSKY PUMP, 3300S-E A94GS51GEGEGEBN

Graco 659839 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, Cntr Port Flange, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659840

HUSKY PUMP, 3300S-E A04CS51SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp ATEX Motor, No CMPSR, Cntr Port Flange, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659841

HUSKY PUMP, 3300S-E A04CS51SPSPSPPT

Graco 659841 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659842

HUSKY PUMP, 3300S-E A04CS51GEGEGEBN

Graco 659842 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, Cntr Port Flange, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 660058

Husky Pump, 3250A-Pp01Aa1Bnbnbnpt

GG D5AD06

Husky Pump, 515Ac-P01Aac4Ud0S

GG D5BD06

HUSKY PUMP, 515P-PP01AP4UD0SPPT

Graco D5BD06 Husky 515 1/2 in. (13 mm) BSP PP Pump, PP Center Section, Urethane Duckbill Seats & SP Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

• Center and end porting options.
• No mechanical seals to cause fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
• Split manifold option to pump multiple fluids without mixing
• Delivery up to 15 gpm (56.7 lpm)
• Easy-to-service air valve and ball checks
• Reliable air valve for years of dependable performance

• Model: Husky
• Series: 515

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Urethane Duckbill

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Polypropylene

• Manifold Configuration: Center Port
• Material: Polypropylene

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 15
• Maximum Flow Rate (L/min): 56.8

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature (°C): 66
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature (°C): 4
• Minimum Operating Temperature (°F): 40

• Overall Height (in): 10.63

• Power Source: Air

GG DB2888

Husky Pump, 1590P-Pa01Ap2Fkfkfk

GG DB3346

HUSKY PUMP, 1590A-PA01AA1SSSDSPPT

Graco DB3346 Husky 1590 AL 1-1/2 in. (38.1 mm) NPT Standard Pump, AL Center Section, SS Seats, Hardened SS Balls & SP Diaphragm

The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
• Expanded material offering to handle endless applications
• Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
• 1-1/2 in. (38.1 mm) ANSI end-porting
• High flow - 100 gpm (378 lpm) in a compact, portable size
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• Lube-free operation
• Available in polypropylene, aluminum and stainless steel
• Epoxy-coated air section for tough environmental conditions

• Model: Husky
• Series: 1590

• Air Exhaust Port Size (in): 3/4
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: 440C Stainless Steel

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 3.81
• Fluid Inlet Size (in): 1-1/2
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Aluminum

• Manifold Configuration: End Port
• Manifold O-Ring Material: PTFE
• Material: Aluminum

• Maximum Air Consumption (SCFM): 125
• Maximum Air Pressure (bar): 8

• Maximum Air Pressure (kPa): 800
• Maximum Air Pressure (MPa): 0.8
• Maximum Air Pressure (psi): 120

• Maximum Cycle Rate (CPM): 200

• Maximum Flow Rate (GPM): 100
• Maximum Flow Rate (L/min): 379

• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Operating Temperature (°C): 66
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 0.4763
• Maximum Solid Size (in): 0.1875
• Maximum Solid Size (mm): 4.763

• Power Source: Air

GG DB4777

Husky Pump, 1590S-Pa01As1Bnbnbn