Diaphragm

GG 659041

HUSKY PUMP, 3300A-E A04CA2GEGEGEPT

Graco 659041 Husky 3300e 3" AL Electric Diaphragm Pump, 7.5 Hp ATEX Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Application: Industrial

• Center Section Material: Aluminum

• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80

• Maximum Working Pressure (psi): 80

• Overall Height (in): 23.6

• Power Source: Electric

GG 659400

HUSKY PUMP, 3300P-E A04AP1PPPTPTPT

Husky 3300e 3" PP Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659401

HUSKY PUMP, 3300P-E A04AP1SPSPSPPT

Husky 3300e 3" PP Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659405

HUSKY PUMP, 3300P-E A94GP1SPSPSPPT

Husky 3300e 3" PP Electric Diaphragm Pump; -- No Motor, No CMPSR, Cntr Port Flange, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659406

HUSKY PUMP, 3300P-E A94GP1PPPTPTPT

Graco 659406 Husky 3300e 3" PP Electric Diaphragm Pump, -- No Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659411

HUSKY PUMP, 3300P-E A04AP1PPCWSPPT

Graco 659411 Husky 3300e 3" PP Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, Cntr Port Flange, AL Center, PP Seat, CW Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 23.6

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659800

HUSKY PUMP, 3300S-E A04AS1SPSPSPBN

Graco 659800 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659801

HUSKY PUMP, 3300S-E A04AS1SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659802

HUSKY PUMP, 3300S-E A04AS1SPSPSPPT

Graco 659802 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659803

HUSKY PUMP, 3300S-E A04AS1GEGEGEBN

Graco 659803 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): None

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: None

• Overall Height (in): 26.3

• Power Rating (HP): None
• Power Source: Electric

GG 659804

HUSKY PUMP, 3300S-E A04AS2SSPTPTPT

Graco 659804 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659805

HUSKY PUMP, 3300S-E A04AS2SPSPSPPT

Graco 659805 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659806

HUSKY PUMP, 3300S-E A04AS2GEGEGEBN

Graco 659806 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659807

HUSKY PUMP, 3300S-E A06AS1SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659808

HUSKY PUMP, 3300S-E A06AS1SPSPSPPT

Husky 3300e 3" SS Electric Diaphragm Pump; 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659809

HUSKY PUMP, 3300S-E A06AS1GEGEGEBN

Graco 659809 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/11.5A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659810

HUSKY PUMP, 3300S-E A06AS2SSPTPTPT

Graco 659810 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659811

HUSKY PUMP, 3300S-E A06AS2SPSPSPPT

Graco 659811 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659812

HUSKY PUMP, 3300S-E A06AS2GEGEGEBN

Graco 659812 Husky 3300e 3" SS Electric Diaphragm Pump, 7.5 Hp AC Motor, 240V CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: NPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659813

HUSKY PUMP, 3300S-E A94GS1SSPTPTPT

Graco 659813 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, SS Seat, PT Ball, PT Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/Polychl 2-Piece

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 832.70

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 104.44
• Maximum Operating Temperature (°F): 220

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): 4.44
• Minimum Operating Temperature (°F): 40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659814

HUSKY PUMP, 3300S-E A94GS1SPSPSPPT

Graco 659814 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659815

HUSKY PUMP, 3300S-E A94GS1GEGEGEBN

Graco 659815 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port NPT, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: BSPT

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: BSPT

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: BSPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 20/10A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659816

HUSKY PUMP, 3300S-E A94GS2SSPTPTPT

Husky 3300e 3" SS Electric Diaphragm Pump; -- No Motor, No CMPSR, End Port BSP, AL Center, SS Seat, PT Ball, PT Diaphragm Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess. Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering Flow rates up to 220 gpm Up to 80% reduction in energy usage compared to air diaphragm pumps Pump replacables last up to 5x longercompared to other brands Transfer solids, slurries, and abrasiveswithout damaging the pump or shearingyour material Low pulsation without costly dampeners Near 0 dB in-plant noise pollution Accurately meter fluid with VFD controls (sold seperately) No rotating or moving seals Runs dry, self primes, and stalls under pressure

GG 659817

HUSKY PUMP, 3300S-E A94GS2SPSPSPPT

Graco 659817 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port BSP, AL Center, SP Seat, SP Ball, SP Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: Santoprene

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: Santoprene
• Diaphragm Material: Santoprene

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 681.30

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 82.22
• Maximum Operating Temperature (°F): 180

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric

GG 659818

HUSKY PUMP, 3300S-E A94GS2GEGEGEBN

Graco 659818 Husky 3300e 3" SS Electric Diaphragm Pump, -- No Motor, No CMPSR, End Port BSP, AL Center, GE Seat, GE Ball, GE Diaphragm

Tackle Tough Transfer Jobs. Graco's proven quality and leading technologywill keep you pumping longer. Husky EODDpumps are on the cutting edge of pumptechnology, giving you a large decrease inoperating costs and more control over yourprocess.

Application: Typical applications include chemicals, paint, oil & gas, in-plant water and wastewater, and mine dewatering

• Flow rates up to 220 gpm
• Up to 80% reduction in energy usage compared to air diaphragm pumps
• Pump replacables last up to 5x longercompared to other brands
• Low pulsation without costly dampeners
• Near 0 dB in-plant noise pollution
• Accurately meter fluid with VFD controls (sold seperately)
• No rotating or moving seals
• Runs dry, self primes, and stalls under pressure

• Model: Husky
• Series: 3300e

• Air Inlet Size (in): 0.375
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: G.E.T. (Graco Engineered Thermoplastic)

• Center Section Material: Aluminum

• Connection Type: Flange

• Diaphragm Compatible Material: G.E.T. (Graco Engineered Thermoplastic)
• Diaphragm Material: G.E.T. (Graco Engineered Thermoplastic)

• Fluid Inlet Size (cm): 7.6
• Fluid Inlet Size (in): 3
• Fluid Inlet Size (mm): 76.2
• Fluid Inlet Thread Type: Flange

• Fluid Outlet Size (cm): 7.6
• Fluid Outlet Size (in): 3
• Fluid Outlet Size (mm): 76.2
• Fluid Outlet Thread Type: Flange
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: Buna-N
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.52

• Maximum Air Pressure (kPa): 551.58
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 19.5/9.75A

• Maximum Cycle Rate (CPM): 185

• Maximum Flow Rate (GPD): 1.2
• Maximum Flow Rate (GPM): 220
• Maximum Flow Rate (L/min): 567.75

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Fluid Pressure (bar): 5.52
• Maximum Fluid Pressure (kPa): 551.58
• Maximum Fluid Pressure (MPa): 0.55
• Maximum Fluid Pressure (psi): 80

• Maximum Motor Speed (RPM): 1800

• Maximum Operating Temperature (°C): 65.56
• Maximum Operating Temperature (°F): 150

• Maximum Solid Size (cm): 1.27
• Maximum Solid Size (in): 0.5
• Maximum Solid Size (mm): 12.70

• Maximum Working Pressure (psi): 80

• Minimum Amperage (A): 0

• Minimum Operating Temperature (°C): -40.00
• Minimum Operating Temperature (°F): -40

• Motor Type: AC

• Overall Height (in): 26.3

• Power Rating (HP): 7.5
• Power Source: Electric