Spray Guns - Manual

DD DVXP-P2-16

DD EXL-620G-15

DD EXL-620G-18

DD JGA-510-62AC

DD JGA-510-98FX

DD JGHV-531-33FF

DD MBC-ZINC-W

GG 160959

GG 17P653

EDGE II GUN, HVLP, CUP, PKGD

Graco 17P653 EDGE II Gun with Metal Cup

Maximize your spraying performance with the innovative HVLP EDGE II Gun. Cutting edge technology such as intuitive gun controls, Quick Release fluid set, and optimized air pressure and airflow will help you achieve the highest quality finish available in fine finish spraying.

• Integrated Flow Control

  Combines material and air flow into one simple control

  Optimized to spray the majority of fine finish applications

  Quick adjustment with 360° rotation and indicator for repeatable spray setting

• Adjustable Air Cap

  3-position rotation to change spray pattern

  Conveniently located at the front of the gun

• Exclusive Quick Clean Check Valve

  Allows more air pressure into the material cup to spray heavier material

  Easily clean and reuse versus replace

  Located by gun to reduce clogged valves due to paint contamination

• Quick Release Needle Design

  Change out needles from the front of the gun with just a click

  Easy to change, easy to clean with no tools needed

  Remove front air cap and nozzle

  Slide trigger lever to release needle

  Pull needle out

• Model: HVLP
• Series: EDGE II

• Compatible Material: Varnish, Enamel, Latex, Stains

• For Use With: FinishPro HVLP Sprayers

• Gun Activation: Manual
• Gun Type: HVLP Gun
• Gun Weight (oz): 20

• Includes: 1 qt (0.95 L) Metal Cup, #3 Quick Release Fluid Set

• Maximum Air Inlet Pressure (bar): 0.7
• Maximum Air Inlet Pressure (kPa): 70
• Maximum Air Inlet Pressure (MPa): 0.07
• Maximum Air Inlet Pressure (psi): 13
• Maximum Air Pressure (bar): 0.7

• Maximum Air Pressure (kPa): 70
• Maximum Air Pressure (MPa): 0.07
• Maximum Air Pressure (psi): 10

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

• Maximum Fluid Pressure (bar): 3.5
• Maximum Fluid Pressure (kPa): 350
• Maximum Fluid Pressure (MPa): 0.35
• Maximum Fluid Pressure (psi): 50

STELLAIR GUN, CONV (.030)

Graco 2004146 Stellair Air Spray Gun, Conventional, 0.030 in (0.8 m), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.030
• Fluid Orifice Size (mm): 0.080
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.042)

Graco 2004147 Stellair Air Spray Gun, Conventional, 0.040 in (1.0 mm), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 0.011
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.110)

Graco 2004150 Stellair Air Spray Gun, Conventional, 0.110 in (2.8 mm), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.110
• Fluid Orifice Size (mm): 0.028
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.042)

Graco 2004151 Stellair Air Spray Gun, HVLP, 0.042 in (1.1 mm), General Industry, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• General industry air cap produces a uniform, high quality spray pattern with low atomizing pressure that reduces air cap build-up.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: General Industry
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 0.011
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.042) SST TIP, AUTOMOVTIVE

Graco 2004163 Stellair Air Spray Gun, Conventional, 0.042 in (11 mm), Automotive, SST Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
• Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Automotive
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.042
• Fluid Orifice Size (mm): 0.011
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.055) SST TIP, AUTOMOVTIVE

Graco 2004164 Stellair Air Spray Gun, Conventional, 0.055 in (1.4 mm), Automotive, SST Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
• Stainless steel (SST) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Automotive
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.055), AUTOMOVTIVE

Graco 2004165 Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Automotive, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Automotive
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, COMP (.055), AUTOMOVTIVE

Graco 2004166 Stellair Air Spray Gun, Compliant, 0.055 in (1.4 mm), Automotive, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• Automotive air cap produces excellent atomization for Class A finishes when spraying base coats, clear coats and primers.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Compliant
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Automotive
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: Compliant Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.070), CERAMIC

Graco 2004167 Stellair Air Spray Gun, Conventional, 0.070 in (1.8 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 0.018
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.086), CERAMIC

Graco 2004168 Stellair Air Spray Gun, Conventional, 0.086 in (2.2 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear air cap maintains high throughput while spraying ultra violet (UV) coatings and other abrasive material with high solids and low volatile organic compounds (VOCs).
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.086
• Fluid Orifice Size (mm): 0.022
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.070), CERAMIC

Graco 2004169 Stellair Air Spray Gun, HVLP, 0.070 in (1.8 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 0.018
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.086), CERAMIC

Graco 2004170 Stellair Air Spray Gun, HVLP, 0.086 in (2.2 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
• Even balance, light weight, and easy trigger pull help reduce fatigue and muscle strain.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.086
• Fluid Orifice Size (mm): 0.022
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, COMP (.070), CERAMIC

Graco 2004171 Stellair Air Spray Gun, Compliant, 0.070 in (1.8 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Compliant
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.070
• Fluid Orifice Size (mm): 0.018
• Gun Type: Compliant Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, COMP (.086), CERAMIC

Graco 2004172 Stellair Air Spray Gun, Compliant, 0.086 in (2.2 mm), High Solids, High Wear Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Compliant air spray reduces bounce back and overspray, while delivering high finish quality and transfer efficiency.
• High solids air cap maintains high throughput while spraying ultra violet (UV) coatings and abrasive materials.
• High wear ceramic tip withstands abrasive material, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• One piece fluid cartridge can be removed and replaced so quickly that it nearly eliminates maintenance related downtime.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Compliant
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: High Solids
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.086
• Fluid Orifice Size (mm): 0.022
• Gun Type: Compliant Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, HVLP (.055), TRIM

Graco 2004176 Stellair Air Spray Gun, HVLP, 0.055 in (1.4 mm), Trim, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• High volume low pressure (HVLP) air spray produces a controlled, low velocity spray pattern that reduces bounce back and overspray, while meeting environmental regulations.
• Trim air cap produces a well-defined edge with minimal overspray, essential for selective applications like edges, trim, and dielectrics.
• Polyetheretherketone (PEEK) needle tip withstands active use, increasing uptime between service intervals.
• Ergonomically designed spray gun body, handle and finger rests comfortably fit in any painter's hand.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: HVLP
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Trim
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 0.014
• Gun Type: HVLP Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300

STELLAIR GUN, CONV (.040), WOOD

Graco 2004178 Stellair Air Spray Gun, Conventional, 0.040 in (1.0 mm), Wood, PEEK Tip

Pressure feed air spray gun delivers the all-star ergonomics, performance, and serviceability industrial painters need to produce stellar results.

• Conventional is the traditional air spray method, producing Class A, automotive finish quality.
• Wood air cap applies low viscosity material, such as stains and toners, used for wood finishing.
• Swivel and hose move with you at any angle, preventing tripping and injury.
• Quick release trigger and quick connect retaining ring mean tool-free maintenance and service.
• Direct stainless steel fluid path means little solvent is needed to flush the gun, reducing VOC (volatile organic compound) emissions.

• Model: Stellair
• Series: Manual
• Product Type: Spray Gun
• Spray Type: Air Spray
• Technology Type: Conventional
• Trigger Lock: Non-Locking
• Trigger Type: Two-Finger
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM
• Application: Wood
• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
• Feed Type: Pressure Feed
• Fluid Inlet Size (in): 0.375
• Fluid Inlet Size (mm): 9.52
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (in): 0.040
• Fluid Orifice Size (mm): 1
• Gun Type: Conventional Gun
• Includes: Air Cap, Needle Assembly, Nozzle
• Maximum Air Pressure (bar): 7
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100
• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300