Spray Guns - Manual

SATA 9795

Spray Gun, HRS U/C, Type 1, W/Wands

SATA 94524

Spray Gun, 3000R, RP, 1.1, LP90

GG L60M10

PRO XP GUN, ES, 60KV, SMART

Pro Xp60 Air Spray Manual Electrostatic General Gun Model, 60 kV, 0.055 in (1.5 mm) nozzle, smart display, standard coatingsThis 60 kV electrostatic paint spray gun comes in a compact, lightweight package with smart technology.Smart controls help you analyze performance, adapt voltage, and troubleshoot easily.Built-in durability means each gun is designed to last – and made in the USA.High transfer efficiency equals less waste, saving you money on material.Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG 288421

CONTRACTOR GUN, RAC 5(PKGD)

Contractor Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTipThe Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 2-finger trigger and a RAC 5 517 SwitchTip and Guard.Exclusive FlexSeal Needle

• Totally enclosed patented design eliminates needle’s exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
• Fluid pushes on seal to quickly shut off needle and reduce spitting
• Spring is located outside fluid path for better flow
• Helps eliminate pack out and slow needle shut-off

Reduced Gun Spitting

• Repositioned seat is closer to the tip, eliminating 60% of the dead space
• Less paint left between needle and tip results in less spitting

Ergonomic Design

• Form-fitted handle provides maximum control and comfort
• Detachable trigger guard swings clear of gun handle for easy filter access
• Lightweight design reduces operator fatigue

Trigger Lock

• Smooth, lightweight trigger pull with simple, thumb-engaged safety lock

Modular Needle Design

• Simply remove the trigger cross pin and unthread front housing to change out needle

EasyGlide Swivel

• Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!

Easy Out Gun Filter

• Filters from the inside out to prevent filter from collapsing
• Interchangeable with all Contractor series guns

GG 289005

AIRPRO GUN, HVLP, .055

Graco 289005 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

• Even material distribution through the spray pattern for optimum coverage
• Improved transfer efficiency through reduced air consumption
• Enhanced atomization through material-specific aircaps
• Ultra-light trigger pull reduces operator muscle stress
• Ergonomic gun handle provides a comfortable grip
• Rounded control knobs for operator comfort
• Optimize spray performance with our cutting edge aircap and nozzle design
• Choose from a wide range of gun models to meet the needs of your specific application

• Model: AirPro

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Application: Specialty
• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (g): 410

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 21
• Maximum Fluid Pressure (kPa): 2100
• Maximum Fluid Pressure (MPa): 2.1
• Maximum Fluid Pressure (psi): 300
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 234237

GUN, SPRAY, UNDERCOAT

Graco 234237 4-Finger Silver Gun with Tip Guard/Tip - 4,500 psi (310 bar) x 3/8 NPT(f) Inlet

Application: Ideal for undercoating and rust-proofing application in medium-sized shops, municipal garages and higher-volume in-plant applications.

• Up to 18,000 psi (1,242 bar)
• Must order 155570 adapter and 239663 straight swivel to accommodate gun to 1/4 in (mbe) hose.

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Body Material: Aluminum

• Compatible Material: Undercoating, Rustproofing
• Component A Inlet Size (cm): 0.635

• Component A Inlet Size (in): 1/4
• Component A Inlet Size (mm): 6.35
• Component A Inlet Thread Type: NPSM

• Fluid Orifice Size (cm): 0.043
• Fluid Orifice Size (in): 0.017
• Fluid Orifice Size (mm): 0.43

• For Use With: Undercoating and Rustproofing

• Gun Activation: Manual
• Gun Type: Airless Gun

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 50
• Maximum Fluid Temperature ( degree F): 120

GG H85T10

PRO XP GUN, ES, 85KV, AA

Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with standard display, standard coatings, includes AEM or AEF tip of choicePro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.High quality spray performance with a one-piece aircap and variety of spray tipsAlternator speed indicator light ensures your turbine speed is running at the correct levelSmart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easierIncrease transfer efficiency up to 10%Internal power supply reduces operator fatigue with no heavy cords to slow you doneRugged, dependable design supported by a three year warrantyEvery gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Graco's requirements

GG 289246

FINEX GUN, GRACO, 2, CONV., 1.8

Graco 289246 Finex Air Spray Gravity Feed Gun, conventional, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

• Aircaps optimized for high quality spray performance
• Lightweight, ergonomic gun
• Lightest trigger pull in its category

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Standard Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.071
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 540
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2
• Gun Weight (oz): 19.05

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Working Pressure (bar): 6.9
• Maximum Fluid Working Pressure (MPa): 0.69
• Maximum Fluid Working Pressure (psi): 100

• Product Type: Spray Gun

GG 289255

FINEX GUN, 2, CONV, PRESS, 1.8

Graco 289255 Finex Air Spray Pressure Feed Gun, conventional, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

• Aircaps optimized for high quality spray performance
• Lightweight, ergonomic gun
• Lightest trigger pull in its category

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Pressure Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.18
• Fluid Orifice Size (in): 0.071
• Fluid Orifice Size (mm): 1.8

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (g): 370
• Gun Weight (kg): 0.37
• Gun Weight (lb): 0.8
• Gun Weight (oz): 13.05

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Working Pressure (bar): 6.9
• Maximum Fluid Working Pressure (MPa): 0.69
• Maximum Fluid Working Pressure (psi): 100

• Product Type: Spray Gun

GG 235462

GUN, SILVER, FINE FINISH

Silver Plus Airless Spray Gun, 2 Finger Trigger, Fine Finish Flat TipThe Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a Fine Finish Flat Tip Guard.Rugged Design

• Durable forged aluminum withstands harsh work environments
• Lighter weight than competitive guns Polished body is easy to clean

Exclusive Needle Design

• Factory set needle needs no trigger adjustments
• Guaranteed for life against breakage
• Maximum performance and long life

Stainless Steel Fluid Tube

• Fluid flows directly to the tip through the gun fluid tube
• Provides the ability to spray heavier materials
• Including high solid coatings and mastics

Optional Light Viscosity Needle Kit

• Provides faster shut-off to reduce spitting of light viscosity material
• Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)

DD COM-PS522G-14-00

Compact, Pressure Tt

GG 258853

RS GUN, ASM, INT MIX, GEL

RS Internal Mix Gel Coat Gun with Tip

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lightweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns. Discover how the Graco RS Resin Spray Gun’s revolutionary design and industry-first features can help boost your company’s bottom line.

Makes production easier

• Simple, quick start up and shut down
• Quick tool-less blade change
• No need to adjust needle settings after maintenance

Improves product quality

• Lightweight cutter gives better chopping control
• Easy one-hand cutter speed control
• Superior spray pattern

Improves operator comfort for increased job satisfaction

• Lighter, ergonomic gun reduces fatigue
• Lets you quickly adjust anvil tension to correct cut variations due to anvil and blade wear
• No problems soaking the RS Gun in solvents overnight

Saves material costs

• Air Assist Containment (AAC®) standard on all RS Guns
• Lower pressure reduces overspray

IW 3035

W71-02N 1.0mm Spray Gun

GG 26B511

PERFORMAA GUN, AA, 5000, GF, SWIVEL

Graco 26B511 PerformAA 5000 Air Assist Gun with General Finishing air cap and fluid swivel

Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

• High quality 5000 psi air assist spray gun
• General finishing air cap for a wide range of materials
• Includes a low profile fluid swivel
• Clicking fan pattern adjustment knob for accurate adjustment

• Model: PerformAA 50

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Male
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
• Compatible Spray Tip: AXM, AXF

• Feed Type: Pressure Feed

• Fluid Adjustment Knob: Clicking
• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 453
• Gun Weight (kg): 0.45
• Gun Weight (lb): 1
• Gun Weight (oz): 16
• Gun Weight with Tip and Guard (g): 490
• Gun Weight with Tip and Guard (oz): 17.4
• Gun Weight without Tip and Guard (g): 460

• Gun Weight without Tip and Guard (oz): 16.2

• Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 110

• Maximum Fluid Pressure (bar): 345
• Maximum Fluid Pressure (kPa): 34500
• Maximum Fluid Pressure (MPa): 34.5
• Maximum Fluid Pressure (psi): 5000
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 110

• Overall Height (cm): 20.8
• Overall Height (in): 8.2
• Overall Height (mm): 208
• Overall Length (cm): 17.25
• Overall Length (in): 6.8
• Overall Length (mm): 173

• Product Type: Spray Gun

IW 5263

LPH50-102G Gun Only

BB 1465-12HV-C1S

Trophy Tu Press 1.2Xchvlp

BB 1466-12HV-C1S

Trophy Tu Grav 1.2Xc1Hvlp

BB 1600-HF0000

Trophy Aa Handgun, 1600

BB 1600-HF1310

Trophy Aa Handgun, 1600Psi & Aa10 + 1310 Tip

DD 303938

Tekna Prolite Gun/Cap (1.3, 1.4, 1.5.Hv30, Te20)

DD 905082

Prolite-S Gravity (Hv5, Te5, 1.0, Cupped)

DD DVXP-P2-12

DVX Manual Pressure Gun, 1.2 MM

DD JGA-510-DEC

Jga Decorator Spray Gun

BB 4400-HF0000

Trophy Aa Handgun, 4400

BB 2465-12HV-32S0

Trophy Gun Pressure/Siphon, 1.2X32Hvlp