STURTEVANT RICHMONT S13210

STR 10766

STR 10983

STR 810501

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-oz

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810503

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810502

Preset Torque Screwdrivers: Preset Torque Driver P Series, in-lb

Product Description

• Accuracy of +/- 6% or better of indicated value from 20% to 100% of the rated capacity
• Torque can be set to any unit of measure
• Be sure to use a calibrated torque tester to set the torque value
• Accuracy meets or exceeds ISO 6789 and ASME B107.300 - 2010 accuracy standards
• Bi-directional versatility - preset same value for both CW and CCW measurement
• 1/4" Female Hex drive uses power bits and insert bits
• Perfect for assembly of electronics and precision mechanical products Ideal for use in field maintenance kits
• Clutch releases automatically, and the grip rotates when target torque is achieved so the fastener cannot be over-torqued
• Extremely smooth rotation requires only 18 degrees of turn to reach the target torque
• Anti-backlash design for ergonomic comfort
• Grip is very comfortable in your hand and gives operators greater purchase in turning the driver
• Sliding T Handle assists in turning the driver at higher torque values
• Well balanced tool that feels great in your hand

STR 810525

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Description

• Adjust torque value by rotating the grip
• Grip lock makes locking in torque value fast, easy, and secure
• Tool changees from one end of the scale to the other with the fewest number of turns
• Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
• Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Flattened case prevents side loading during torque application or testing/calibration
• Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

STR 810574

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810588

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver Kit, 6 Piece Kit, in-lb

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Kit includes Hex 1/4 to 1/4 Sq. Drive

STR 810597

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Description

• Adjust torque value by rotating the grip
• Grip lock makes locking in torque value fast, easy, and secure
• Tool changees from one end of the scale to the other with the fewest number of turns
• Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
• Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Flattened case prevents side loading during torque application or testing/calibration
• Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

STR 810674

STR 810712

Wireless Digital Torque Wrenches: TAC Digital Torque and Angle Wrench, in-lb

Product Description

• Keep up with the shortest of takt times
• Fully compatible with the Global 400, Global 400mp, and the TCV e2 torque controllers
• Works with the Patented Holding Tool when used with the Global 400 or Global 400mp
• Access to over 200 interchangeable heads that all fit on the end of the Pin and Spring Dovetail
• Heads "Lock On" to the Dovetail when the head is centered on the wrench
• Powered by one AAA NiMH rechargeable battery

STR 21608

STR 21506

STR 21431

STR 21480

STR 21970

STR 870778

STR 883243

STR SRT10423

STR SRT12011

STR SRT12013

STR SRT816793

STR 810046

STR 810320

STR SRT12043EU

STR SRT12048EU

STR SRT12053EU

STR SRT12052EU

STR SRT12045EU

STR 869752

STR 810915

STR 810915K

STR 810921K

STR 819369

STR 883246

STR 10013

Torque Transducers: L Series

Product Description

• Built-in L-bracket for mounting perpendicular to your surface
• Requires detachable cable Part: 10293
• Mounting holes drilled for 5/16 bolts, 3.25 on center

STR 10015

Torque Transducers: QC Series

Product Description

• Quick Connect System that can be mounted to ML 1000 and ML 2000 Mechanical Loader
• Removal of adapter plate permits use with ML 250 (250 ft. lbs. capacity and below)
• Detachable cable (Part No: 10293) is required for all transducers
• TT-QC 25IO, TT-QC 1000 and TT-QC 2000 include detachable cable (Part No: 10293)

STR 812143

STR 816875

STR 10665

Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb

Product Description

• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
• Torque and angle can identify changing joint conditions and prevent errors
• Backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application
• Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400m
• P-Sets are set and saved via the controller, no changes can be made at the wrench level
• Provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series
• Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models

STR 10673

Wireless Digital Torque Wrench Accessories: Wireless Torque Wrench, Batter Pack and Charger

Product Description

STR 10680

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10681

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10684

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10686

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10692

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779

STR 10691

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870778

STR 10693

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780

STR 10694

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870781

STR 10696

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779

STR 10697

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780

STR 10710

Wireless Digital Torque Wrench Accessories: Wireless Digital Torque Wrench, Radio Interface

Product Description

STR 10742

Wireless Torque Screwdrivers: Battery charging units and battery tester charger

Product Description

• Four slot battery charger for TAC Torque Wrench

STR 10780

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809223

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809220

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10981

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10782

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809219

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10788

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10790

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10781

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10783

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809237

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809294

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809290

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809293

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809302

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810017

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver, Nm

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809304

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809317

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809308

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809330

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809315

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810045

Adjustable Torque Screwdrivers: Exactorq Adjustable Torque Screwdriver, in-oz

Product Description

• Bi-directional accuracy of +/- 6% preset value
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Short dwell designed to prevent repetitive motion injuries
• Preset torque using torque tester and insert a bit to use
• Can be set in any unit of torque measurement
• Long shaft for use in limited-access applications
• Uses standard 1/4" bits, adapters, and sockets
• Polished aluminum exterior
• Anti-backlash design enhances repeatability
• Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809352

Box Head Interchangeable Heads for Torque Wrenches

STR 810100

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810424

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810335

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810168

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810760

Micrometer Adjustable Torque Wrenches: SD Series Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Torque value is adjusted by rotating the grip
• Our tools change from the top of the scale to the bottom in the fewest number of turns
• Grip lock makes locking in the torque value fast, easy, and secure
• Ball-bearing rock-over assembly assures smooth operation, enhances repeatability, and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Design provides a strong audible and tactile pulse when the set torque is achieved
• Flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb, or 300 Nm, capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate.

STR 810772

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810788

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810794

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, Nm

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810802

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810854

Wireless Click-Type Torque Wrenches: Hardwired Preset Click-Type Torque Wrenches (SLTC/SLTCR), in-lb

Product Description

• Accuracy of +/- 4% of the preset value from 20% to 100% of capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Preset from the factory includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Five of seven models use the incredibly strong SR dovetail and can be used with any of over 100 SR Interchangeable Heads
• Tamper-resistant torque setting mechanism design facilitates setting and discourages unauthorized torque setting changes
• Excellent audible and tactile impulse when preset torque is achieved
• Lightweight and cushion grip provides excellent ergonomics
• Slender body facilitates use in constrained-access applications
• Microswitch closes when the tool clicks and opens immediately when pressure is released
• Separate cable with a connector (required) facilitates replacement if damaged.

STR 812352

Click-Type Preset Torque Wrench Accessories: Grips for Preset Click-Type Torque Wrenches

Product Description

• Grips for Preset Click-Type Torque Wrenches

STR 812353

Click-Type Preset Torque Wrench Accessories: Grips for Preset Click-Type Torque Wrenches

Product Description

• Grips for Preset Click-Type Torque Wrenches

STR 815701

Beam & Dial Torque Wrenches: Dial Torque Wrenches, in-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815705

Beam & Dial Torque Wrenches: Dial Torque Wrenches, ft-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815704

Beam & Dial Torque Wrenches: Dial Torque Wrenches, ft-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815709

Beam & Dial Torque Wrenches: Dial Torque Wrenches, Nm

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815706

Beam & Dial Torque Wrenches: Dial Torque Wrenches, ft-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815720

Beam & Dial Torque Wrenches: Dial Torque Wrenches, Nm

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 819003

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819033

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819035

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819037

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 819038

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm