Menu
Search
Search Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close

    Spray Guns - Manual

    View as Grid List
    Sort by
    Display items per page
    GG 24M392.jpg

    Airpro Gun, Efx, Conv, .039, Rnd

    GG 24M392

    GG 24M392

    Airpro Gun, Efx, Conv, .039, Rnd
    $2,030.00
    GG 24R0211.jpg

    FUSION MP GUN, MANUAL 2K

    GG 24R021

    GG 24R021

    FUSION MP GUN, MANUAL 2K

    Graco 24R021 Manual 2K Dispense Gun

    Graco&prime, s 2K Manual Dispense Gun is a hand-operated dispensing gun making joint and crack fill floor maintenance easy with a single handle that starts and stops A and B materials simultaneously. Compatible with Reactor E-8p for Flooring and the unheated Reactor E-10.

    Application: For joint and crack fill applications
    • Easy to use
    • Does not require compressed air to operate
    • Uses a static mixer for proper mixing of 1:1 ratio materials
    • Uses check valves to help prevent material cross-over


    • Model: Fusion MP
    • Series: Specialty
    • Compatible Material: Polyurea
    • Maximum Fluid Pressure (bar): 137
    • Maximum Fluid Pressure (kPa): 13700
    • Maximum Fluid Pressure (MPa): 14
    • Maximum Fluid Pressure (psi): 2000
    • Maximum Fluid Pressure (bar): 137
    • Maximum Fluid Pressure (kPa): 13700
    • Maximum Fluid Pressure (MPa): 14
    • Maximum Fluid Pressure (psi): 2000
    • Maximum Fluid Working Pressure (bar): 137
    • Maximum Fluid Working Pressure (MPa): 14
    • Maximum Fluid Working Pressure (psi): 2000
    $2,350.00
    GG 26B500.jpg

    PERFORMAA GUN, AA, 1500, GF

    GG 26B500

    GG 26B500

    PERFORMAA GUN, AA, 1500, GF

    Graco 26B500 PerformAA 1500 Air Assist Gun with General Finishing air cap

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi air assist spray gun
    • General finishing air cap for a wide range of materials
    • Indexing air cap for accurate spray position
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 15
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $1,140.00
    GG 26B501.jpg

    PERFORMAA GUN, AA, 1500, GF, SWIVEL

    GG 26B501

    GG 26B501

    PERFORMAA GUN, AA, 1500, GF, SWIVEL

    PerformAA 1500 Air Assist Gun with General Finishing air cap and fluid swivel Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics. High quality 1500 psi air assist spray gun General finishing air cap for a wide range of materials Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice Indexing air cap for accurate spray position
    $1,205.00
    GG 26B502.jpg

    PERFORMAA GUN, AA, 1500, WL

    GG 26B502

    GG 26B502

    PERFORMAA GUN, AA, 1500, WL

    Graco 26B502 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap and light trigger pull

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi air assist spray gun
    • Wood lacquer air cap for wood finishing top coats and lacquers
    • Indexing air cap for accurate spray position
    • Trigger pull force is ultra-light, reducing operator fatigue and muscle stress


    • Model: PerformAA 15
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $1,140.00
    GG 26B503.jpg

    PERFORMAA GUN, AA, 1500, WL, SWIVEL

    GG 26B503

    GG 26B503

    PERFORMAA GUN, AA, 1500, WL, SWIVEL

    Graco 26B503 PerformAA 1500 Air Assist Gun with Wood Lacquer air cap, light trigger pull and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi air assist spray gun
    • Wood lacquer air cap for wood finishing top coats and lacquers
    • Includes a low profile fluid swivel
    • Trigger pull force is ultra-light, reducing operator fatigue and muscle stress


    • Model: PerformAA 15
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Lacquer, Varnish, Latex, Plural Component Materials, Solvent borne, Solvent borne Paints, Topcoats
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $1,200.00
    GG 26B505.jpg

    PERFORMAA GUN, AA, 1500, LV, SWIVEL

    GG 26B505

    GG 26B505

    PERFORMAA GUN, AA, 1500, LV, SWIVEL

    Graco 26B505 PerformAA 1500 Air Assist Gun with Low Viscosity air cap, light trigger pull and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi air assist spray gun
    • Low viscosity air cap for even dispersion of light materials
    • Includes a low profile fluid swivel
    • Trigger pull force is ultra-light, reducing operator fatigue and muscle stress


    • Model: PerformAA 15
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Indexing Air Cap, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $1,205.00
    Picture of Performa AA 5000 Air Assist Gun

    Performa AA 5000 Air Assist Gun

    GG 26B509

    GG 26B509

    PERFORMAA GUN, AA, 5000, GF, HIGH-FLOW

    Graco 26B509 PerformAA 5000 Air Assist Gun with General Finishing air cap and no fluid filter

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • General finishing air cap for a wide range of materials
    • No fluid filter for high flow applications
    • Clicking fan pattern adjustment knob for accurate adjustment
    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Solventborne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature ( degree C): 43
    • Maximum Fluid Temperature ( degree F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature ( degree C): 43
    • Maximum Fluid Temperature ( degree F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,295.00
    GG 26B510.jpg

    PERFORMAA GUN, AA, 5000, GF

    GG 26B510

    GG 26B510

    PERFORMAA GUN, AA, 5000, GF

    Graco 26B510 PerformAA 5000 Air Assist Gun with General Finishing air cap

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • General finishing air cap for a wide range of materials
    • Carbide fluid seat and carbide ball for durability
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,295.00
    Picture of PerformAA 5000 Air Assist Gun

    PerformAA 5000 Air Assist Gun

    GG 26B512

    GG 26B512

    PERFORMAA GUN,AA,5000,WL,SWIVEL

    Graco 26B512 PerformAA 5000 Air Assist Gun with Wood Lacquer air cap and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • Wood lacquer air cap for wood finishing top coats and lacquers
    • Includes a low profile fluid swivel Fine finish, AXM, or pre-orifice, AXF, spray tip included as tip of choice
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Waterborne, Latex, Plural Component Materials, Polyurethane, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    $1,365.00
    GG 26B513.jpg

    PERFORMAA GUN, AA, 5000, HV, SWIVEL

    GG 26B513

    GG 26B513

    PERFORMAA GUN, AA, 5000, HV, SWIVEL

    Graco 26B513 PerformAA 5000 Air Assist Gun with High Viscosity air cap and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • High viscosity air cap for high solids and high viscosity spraying
    • Includes a low profile fluid swivel
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: High Solids, Acid Catalyzed, Epoxies, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Waterborne
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,365.00
    GG 26B514.jpg

    PERFORMAA GUN, AA, 5000, WB, SWIVEL

    GG 26B514

    GG 26B514

    PERFORMAA GUN, AA, 5000, WB, SWIVEL

    Graco 26B514 PerformAA 5000 Air Assist Gun with Waterborne air cap and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • Waterborne air cap for breaking up waterborne materials
    • Includes a low profile fluid swivel
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Waterborne, Latex, Plural Component Materials, Polyurethane, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,365.00
    GG 26B515.jpg

    PERFORMAA GUN, AA, 5000, QD, SWIVEL

    GG 26B515

    GG 26B515

    PERFORMAA GUN, AA, 5000, QD, SWIVEL

    Graco 26B515 PerformAA 5000 Air Assist Gun with Quick Drying air cap and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • Quick Drying air cap for minimizing air entrapment
    • Includes a low profile fluid swivel
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,365.00
    GG 26B516.jpg

    PERFORMAA GUN, AA, 5000, LV, SWIVEL

    GG 26B516

    GG 26B516

    PERFORMAA GUN, AA, 5000, LV, SWIVEL

    Graco 26B516 PerformAA 5000 Air Assist Gun with Low Viscosity air cap and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi air assist spray gun
    • Low viscosity air cap for even dispersion of light materials
    • Includes a low profile fluid swivel
    • Clicking fan pattern adjustment knob for accurate adjustment


    • Model: PerformAA 50
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Stains, Sealer, Solvent borne, Solvent borne Paints, Toner
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 17.25
    • Overall Length (in): 6.8
    • Overall Length (mm): 173
    • Product Type: Spray Gun
    $1,365.00
    GG 26B519.jpg

    PERFORMAA GUN, AL, 1500

    GG 26B519

    GG 26B519

    PERFORMAA GUN, AL, 1500

    Graco 26B519 PerformAA 1500 Airless Gun

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi airless spray gun
    • Airless air cap for fine finish airless spraying
    • Carbide fluid seat and carbide ball for durability


    • Model: PerformAA 15 Airless
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: N/A
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Airless Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $683.00
    Picture of PerformAA 1500 Air Assist Gun with Gen Finish Air Cap, Plastic seat and St Steel Ball, w/Tip of Choice

    PerformAA 1500 Air Assist Gun with Gen Finish Air Cap, Plastic seat and St Steel Ball, w/Tip of Choice

    GG 26B504

    GG 26B504

    PERFORMAA GUN, AA, 1500, GF, ACID

    Graco 26B504 PerformAA 1500 Air Assist Gun with Gen Finish air cap, plastic seat and St Steel ball

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 1500 psi air assist spray gun
    • General finishing air cap for a wide range of materials
    • Plastic seat and stainless steel ball for acid material compatibility
    • Trigger pull force is ultra-light, reducing operator fatigue and muscle stress
    • Model: PerformAA 15
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Acid Catalyzed, Lacquer, Latex, Plural Component Materials, Solventborne, Solventborne Paints, Topcoats, Varnish
    • Compatible Spray Tip: AXM, AXF
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: Clicking
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 480
    • Gun Weight with Tip and Guard (oz): 17.1
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Plastic Seat, Indexing Air Cap, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature ( degree C): 43
    • Maximum Fluid Temperature ( degree F): 110
    • Maximum Fluid Pressure (bar): 105
    • Maximum Fluid Pressure (kPa): 10500
    • Maximum Fluid Pressure (MPa): 10.5
    • Maximum Fluid Pressure (psi): 1500
    • Maximum Fluid Temperature ( degree C): 43
    • Maximum Fluid Temperature ( degree F): 110
    • Overall Height (cm): 20.8
    • Overall Height (in): 8.2
    • Overall Height (mm): 208
    • Overall Length (cm): 15.25
    • Overall Length (in): 6
    • Overall Length (mm): 152
    • Product Type: Spray Gun
    $1,140.00
    GG 26B518.jpg

    PERFORMAA GUN, AA, 5000, RAC, SWIVEL

    GG 26B518

    GG 26B518

    PERFORMAA GUN, AA, 5000, RAC, SWIVEL

    Graco 26B518 PerformAA 5000 RAC Air Assist Gun with Reverse A Clean air cap and spray tip and fluid swivel

    Performance Above All with material specific air caps and fine finish spray tips for superior spray performance. Light weight gun designed for operator comfort with optimized balance, trigger pull and ergonomics.

    • High quality 5000 psi RAC air assist spray gun
    • Rerverse-A-Clean air cap and tip for quick cleaning
    • Includes a low profile fluid swivel


    • Model: PerformAA RAC
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Gender: Male
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Epoxies, High Solids, Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Solvent borne Paints, Urethane, UV Coating, Varnish
    • Compatible Spray Tip: FFLP, LTX
    • Feed Type: Pressure Feed
    • Fluid Adjustment Knob: N/A
    • Fluid Inlet Size (cm): 0.635
    • Fluid Inlet Size (in): 1/4
    • Fluid Inlet Size (mm): 6.35
    • Fluid Inlet Thread Gender: Male
    • Fluid Inlet Thread Type: NPSM
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Air-Assisted Gun
    • Gun Weight (g): 453
    • Gun Weight (kg): 0.45
    • Gun Weight (lb): 1
    • Gun Weight (oz): 16
    • Gun Weight with Tip and Guard (g): 490
    • Gun Weight with Tip and Guard (oz): 17.4
    • Gun Weight without Tip and Guard (g): 460
    • Gun Weight without Tip and Guard (oz): 16.2
    • Includes: Carbide Seat/Ball, Tip Guard, Tip of Choice, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Maximum Fluid Pressure (bar): 345
    • Maximum Fluid Pressure (kPa): 34500
    • Maximum Fluid Pressure (MPa): 34.5
    • Maximum Fluid Pressure (psi): 5000
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 110
    • Overall Height (cm): 19.8
    • Overall Height (in): 7.8
    • Overall Height (mm): 198
    • Overall Length (cm): 18.3
    • Overall Length (in): 7.2
    • Overall Length (mm): 183
    • Product Type: Spray Gun
    $1,360.00
    GG 24C857.jpg

    G40 Gun, Assembly, Aa Rac Tip

    GG 24C857

    GG 24C857

    G40 Gun, Assembly, Aa Rac Tip
    Call for pricing
    GG 24C856.jpg

    Gun Assy., AA G40, High Flow

    GG 24C856

    GG 24C856

    Gun Assy., AA G40, High Flow
    Call for pricing
    GG 24D472.jpg

    AIRPRO GUN, PRESSURE, CONV

    GG 24D472

    GG 24D472

    AIRPRO GUN, PRESSURE, CONV

    Graco 24D472 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, for Automotive Applications

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Automotive
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Adhesives, Ceramics, Fast-Set, High Solids, Sealants, Solvent borne, Stains, UV Coating, Waterborne
    • Feed Type: Pressure Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.11
    • Fluid Orifice Size (in): 0.042
    • Fluid Orifice Size (mm): 1.1
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 24F202.jpg

    AIRPRO GUN, PRESSURE, CONV

    GG 24F202

    GG 24F202

    AIRPRO GUN, PRESSURE, CONV

    Graco 24F202 AirPro Air Spray Pressure Feed Gun, Conventional, 0.042 inch (1.1 mm) Nozzle, Air Brush Applications

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Air Brush
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Pressure Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.11
    • Fluid Orifice Size (in): 0.042
    • Fluid Orifice Size (mm): 1.1
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 243283.jpg

    GUN, SILVER RAC

    GG 243283

    GG 243283

    GUN, SILVER RAC

    Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC 5 517 SwitchTip The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. It is the preferred gun for high pressure applications. This Silver Plus gun includes a 2 finger trigger and a RAC 5 517 SwitchTip and Guard. Rugged Design
    • Durable forged aluminum withstands harsh work environments
    • Lighter weight than competitive guns Polished body is easy to clean
    Exclusive Needle Design
    • Factory set needle needs no trigger adjustments
    • Guaranteed for life against breakage
    • Maximum performance and long life
    Stainless Steel Fluid Tube
    • Fluid flows directly to the tip through the gun fluid tube
    • Provides the ability to spray heavier materials
    • Including high solid coatings and mastics
    Optional Light Viscosity Needle Kit
    • Provides faster shut-off to reduce spitting of light viscosity material
    • Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)
    $552.00
    GG 244784.jpg

    KIT, ACCY, GUN & WAND

    GG 244784

    GG 244784

    KIT, ACCY, GUN & WAND

    Professional Grade Gun with 36 in Wand For use with G-Force II Pressure Washers
    $103.50
    GG 245924.jpg

    GUN, SPRAY, TEXTURE

    GG 245924

    GG 245924

    GUN, SPRAY, TEXTURE

    Graco 245924 Texture Gun and Hopper

    Double-handle and lightweight design provides maximum support and control for ceiling, wall and floor applications. Sprays acoustics, drywall mud, waterproofing materials, pool-deck sealant, stucco and most gravity-fed materials.

    • Lightweight Design - Weighs up to 35% less than comparable models to reduce operator fatigue
    • Angled, 1-1/2 Gallon (5.7 L) Capacity for longer spraying periods before refills
    • Handles on Both Sides - Rotates 180° for maximum control when spraying ceilings, walls and floors
    • Durable metal trigger with conveniently located trigger adjustment allows fine tuning of fluid output for a precise and consistent finish
    • Exclusive Hopper Clamp - No tools needed to attach hopper to gun


    • Model: TexSpray
    • Applicator Type: Manual
    • Compatible Material: Water-Based Material
    • Feed Type: Pressure Feed
    • For Use With: Texture Sprayer
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Airless Gun
    • Gun Weight (g): 990
    • Gun Weight (kg): 0.99
    • Gun Weight (lb): 2.1875
    • Gun Weight (oz): 35
    • Maximum Air Inlet Pressure (bar): 9
    • Maximum Air Inlet Pressure (kPa): 900
    • Maximum Air Inlet Pressure (MPa): 0.9
    • Maximum Air Inlet Pressure (psi): 130.5
    • Maximum Air Pressure (bar): 9
    • Maximum Air Pressure (kPa): 900
    • Maximum Air Pressure (MPa): 0.9
    • Maximum Air Pressure (psi): 125
    • Maximum Fluid Pressure (bar): 4.9
    • Maximum Fluid Pressure (kPa): 490
    • Maximum Fluid Pressure (MPa): 0.49
    • Maximum Fluid Pressure (psi): 70
    • Maximum Fluid Pressure (bar): 4.9
    • Maximum Fluid Pressure (kPa): 490
    • Maximum Fluid Pressure (MPa): 0.49
    • Maximum Fluid Pressure (psi): 70
    • Overall Height (cm): 60.96
    • Overall Height (in): 24
    • Overall Height (mm): 609.6
    • Overall Length (cm): 45.085
    • Overall Length (in): 17.75
    • Overall Length (mm): 450.85
    • Overall Width (cm): 27.94
    • Overall Width (in): 11
    • Overall Width (mm): 279.4
    • Product Type: Spray Gun
    $296.50
    Picture of GUN, SILVER

    GUN, SILVER

    GG 246240

    GG 246240

    GUN, SILVER

    Silver Plus Airless Spray Gun, 2 Finger Trigger, RAC X 517 SwitchTip The Silver Plus Gun is known for its durability, long life, spraying performance and comfortable design. Rated at 5000 psi (345 bar, 34.5 MPa), this is the preferred gun for high-pressure applications. Includes a 2-finger trigger and a RAC X 517 SwitchTip and Guard. Rugged Design
    • Durable forged aluminum withstands harsh work environments
    • Lighter weight than competitive guns Polished body is easy to clean
    Exclusive Needle Design
    • Factory set needle needs no trigger adjustments
    • Guaranteed for life against breakage
    • Maximum performance and long life
    Stainless Steel Fluid Tube
    • Fluid flows directly to the tip through the gun fluid tube
    • Provides the ability to spray heavier materials
    • Including high solid coatings and mastics
    Optional Light Viscosity Needle Kit
    • Provides faster shut-off to reduce spitting of light viscosity material
    • Included in Silver Plus Gun (Part No. 235462), or as an optional Needle Kit (Part No. 235475)
    $548.00
    Refine
    ×
    Manufacturer
    Manufacturers
    View all
    Information
    My account
    Customer service

    Payment options

    Copyright © 2026 AirPower. All rights reserved.