Menu
Search
Search Close
Shopping cart Close

You have no items in your shopping cart.

All Categories
    Menu Close

    Spray Guns - Manual

    View as Grid List
    Sort by
    Display items per page
    GG 289031.jpg

    AIRPRO GUN, SIPHON, HVLP, .070

    GG 289031

    GG 289031

    AIRPRO GUN, SIPHON, HVLP, .070

    Graco 289031 AirPro Air Spray Siphon Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Siphon Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $966.00
    GG 289015.jpg

    AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

    GG 289015

    GG 289015

    AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

    Graco 289015 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289026.jpg

    AIRPRO GUN, ASSY, COMP, GRAV, PPS, .055

    GG 289026

    GG 289026

    AIRPRO GUN, ASSY, COMP, GRAV, PPS, .055

    Graco 289026 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289033.jpg

    AIRPRO GUN, SIPHON, COMP, .070

    GG 289033

    GG 289033

    AIRPRO GUN, SIPHON, COMP, .070

    Graco 289033 AirPro Air Spray Siphon Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Siphon Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $966.00
    GG 289020.jpg

    AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055

    GG 289020

    GG 289020

    AIRPRO GUN, ASSY, CONV, GRAV, PPS, .055

    Graco 289020 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, 3M PPS Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289030.jpg

    AIRPRO GUN, SIPHON, HVLP, .055

    GG 289030

    GG 289030

    AIRPRO GUN, SIPHON, HVLP, .055

    Graco 289030 AirPro Air Spray Siphon Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Siphon Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $966.00
    GG 289027.jpg

    AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070

    GG 289027

    GG 289027

    AIRPRO GUN, ASSY, COMP, GRAV, PPS, .070

    Graco 289027 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289018.jpg

    AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

    GG 289018

    GG 289018

    AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

    Graco 289018 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289014.jpg

    AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

    GG 289014

    GG 289014

    AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

    Graco 289014 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289017.jpg

    AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

    GG 289017

    GG 289017

    AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

    Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289009.jpg

    AIRPRO GUN, COMP, .070

    GG 289009

    GG 289009

    AIRPRO GUN, COMP, .070

    Graco 289009 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, without Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289021.jpg

    AIRPRO GUN, ASSY, CONV, GRAV, PPS, .070

    GG 289021

    GG 289021

    AIRPRO GUN, ASSY, CONV, GRAV, PPS, .070

    Graco 289021 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289006.jpg

    AIRPRO GUN, HVLP, .070

    GG 289006

    GG 289006

    AIRPRO GUN, HVLP, .070

    Graco 289006 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, without Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289028.jpg

    AIRPRO GUN, SIPHON, CONV.055

    GG 289028

    GG 289028

    AIRPRO GUN, SIPHON, CONV.055

    Graco 289028 AirPro Air Spray Siphon Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Siphon Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $654.00
    GG 289008.jpg

    AIRPRO GUN, COMP, .055

    GG 289008

    GG 289008

    AIRPRO GUN, COMP, .055

    Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289012.jpg

    AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

    GG 289012

    GG 289012

    AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

    Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289035.jpg

    AIRPRO GUN, AUTOMOTIVE, HVLP, .047

    GG 289035

    GG 289035

    AIRPRO GUN, AUTOMOTIVE, HVLP, .047

    Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Automotive
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne
    • Feed Type: Pressure Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.12
    • Fluid Orifice Size (in): 0.047
    • Fluid Orifice Size (mm): 1.2
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289029.jpg

    AIRPRO GUN, SIPHON, CONV, .070

    GG 289029

    GG 289029

    AIRPRO GUN, SIPHON, CONV, .070

    Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Siphon Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.070
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $639.00
    GG 289037.jpg

    AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

    GG 289037

    GG 289037

    AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

    Graco 289037 AirPro Air Spray Pressure Feed Gun, Compliant, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Automotive
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne
    • Feed Type: Pressure Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.12
    • Fluid Orifice Size (in): 0.047
    • Fluid Orifice Size (mm): 1.2
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289011.jpg

    AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

    GG 289011

    GG 289011

    AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

    Graco 289011 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Specialty
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 590
    • Gun Weight (kg): 0.59
    • Gun Weight (lb): 1.3
    • Gun Weight (oz): 20.8
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $545.00
    GG 289111.jpg

    AIRPRO GUN, STAIN, COMPLIANT, .040

    GG 289111

    GG 289111

    AIRPRO GUN, STAIN, COMPLIANT, .040

    Graco 289111 AirPro Air Spray Pressure Feed Gun, Compliant, 0.040 inch (1.0 mm) Nozzle, for Wood Applications

    The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility.

    • Even material distribution through the spray pattern for optimum coverage
    • Improved transfer efficiency through reduced air consumption
    • Enhanced atomization through material-specific aircaps
    • Ultra-light trigger pull reduces operator muscle stress
    • Ergonomic gun handle provides a comfortable grip
    • Rounded control knobs for operator comfort
    • Optimize spray performance with our cutting edge aircap and nozzle design
    • Choose from a wide range of gun models to meet the needs of your specific application


    • Model: AirPro
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Application: Wood
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Compatible Material: NGR, Solvent borne, Stains, Toner, UV Coating, Waterborne
    • Feed Type: Pressure Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.10
    • Fluid Orifice Size (in): 0.040
    • Fluid Orifice Size (mm): 1.0
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Compliant Gun
    • Gun Weight (g): 410
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 21
    • Maximum Fluid Pressure (kPa): 2100
    • Maximum Fluid Pressure (MPa): 2.1
    • Maximum Fluid Pressure (psi): 300
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    Call for pricing
    GG 289239.jpg

    FINEX GUN, GRACO, 2, HVLP, 1.4

    GG 289239

    GG 289239

    FINEX GUN, GRACO, 2, HVLP, 1.4

    Graco 289239 Finex Air Spray Gravity Feed Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

    Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

    • Aircaps optimized for high quality spray performance
    • Lightweight, ergonomic gun
    • Lightest trigger pull in its category


    • Model: Finex
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Body Material: Metal
    • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Standard Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (kg): 0.54
    • Gun Weight (lb): 1.2
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $246.50
    GG 289241.jpg

    FINEX GUN, GRACO, 2, HVLP, 1.8

    GG 289241

    GG 289241

    FINEX GUN, GRACO, 2, HVLP, 1.8

    Graco 289241 Finex Air Spray Gravity Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size

    Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

    • Aircaps optimized for high quality spray performance
    • Lightweight, ergonomic gun
    • Lightest trigger pull in its category


    • Model: Finex
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Body Material: Metal
    • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Standard Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.18
    • Fluid Orifice Size (in): 0.071
    • Fluid Orifice Size (mm): 1.8
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: HVLP Gun
    • Gun Weight (g): 540
    • Gun Weight (kg): 0.54
    • Gun Weight (lb): 1.2
    • Gun Weight (oz): 19.05
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Working Pressure (bar): 6.9
    • Maximum Fluid Working Pressure (MPa): 0.69
    • Maximum Fluid Working Pressure (psi): 100
    • Product Type: Spray Gun
    $246.50
    GG 289244.jpg

    FINEX GUN, GRACO, 2, CONV, 1.4

    GG 289244

    GG 289244

    FINEX GUN, GRACO, 2, CONV, 1.4

    Graco 289244 Finex Air Spray Gravity Feed Gun, conventional, 0.055 in (1.4 mm) needle/ nozzle size

    Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

    • Aircaps optimized for high quality spray performance
    • Lightweight, ergonomic gun
    • Lightest trigger pull in its category


    • Model: Finex
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Body Material: Metal
    • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Standard Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.14
    • Fluid Orifice Size (in): 0.055
    • Fluid Orifice Size (mm): 1.4
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (g): 540
    • Gun Weight (kg): 0.54
    • Gun Weight (lb): 1.2
    • Gun Weight (oz): 19.05
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Working Pressure (bar): 6.9
    • Maximum Fluid Working Pressure (MPa): 0.69
    • Maximum Fluid Working Pressure (psi): 100
    • Product Type: Spray Gun
    $200.50
    GG 289245.jpg

    FINEX GUN, GRACO, 2, CONV., 1.5

    GG 289245

    GG 289245

    FINEX GUN, GRACO, 2, CONV., 1.5

    Graco 289245 Finex Air Spray Gravity Feed Gun, conventional, 0.059 in (1.5 mm) needle/ nozzle size

    Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

    • Aircaps optimized for high quality spray performance
    • Lightweight, ergonomic gun
    • Lightest trigger pull in its category


    • Model: Finex
    • Air Inlet Size (cm): 0.635
    • Air Inlet Size (in): 1/4
    • Air Inlet Size (mm): 6.35
    • Air Inlet Thread Type: NPSM
    • Applicator Type: Manual
    • Bleed Type: Non-Bleeder
    • Body Material: Metal
    • Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne
    • Feed Type: Standard Gravity Feed
    • Fluid Inlet Size (cm): 0.9525
    • Fluid Inlet Size (in): 3/8
    • Fluid Inlet Size (mm): 9.525
    • Fluid Inlet Thread Type: NPSM
    • Fluid Orifice Size (cm): 0.15
    • Fluid Orifice Size (in): 0.059
    • Fluid Orifice Size (mm): 1.5
    • Gun Activation: Manual
    • Gun Included: 1
    • Gun Type: Conventional Gun
    • Gun Weight (kg): 0.54
    • Gun Weight (lb): 1.2
    • Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup
    • Maximum Air Inlet Pressure (bar): 7
    • Maximum Air Inlet Pressure (kPa): 700
    • Maximum Air Inlet Pressure (MPa): 0.7
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Air Pressure (bar): 7
    • Maximum Air Pressure (kPa): 700
    • Maximum Air Pressure (MPa): 0.7
    • Maximum Air Pressure (psi): 100
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Maximum Fluid Pressure (bar): 7
    • Maximum Fluid Pressure (kPa): 700
    • Maximum Fluid Pressure (MPa): 0.7
    • Maximum Fluid Pressure (psi): 100
    • Maximum Fluid Temperature (°C): 43
    • Maximum Fluid Temperature (°F): 109
    • Product Type: Spray Gun
    $232.00
    Refine
    ×
    Manufacturer
    Manufacturers
    View all
    Information
    My account
    Customer service

    Payment options

    Copyright © 2026 AirPower. All rights reserved.