GG 262572
REACTOR A-25 PROPORTIONER, BARE
Graco 262572 Reactor A-25 Bare Proportioner
The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.
Application: For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute.
- Maintains temperature setpoints for better yield
- Maintains consistent output pressure for uniform spray pattern
- Easy to operate and maintain
- DataTrak Control
- Resettable counter tracks material usage
- Three Heat Zones
- Three independent heat zones - ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
- Recirculation Manifold
- A quick, easy way to balance system pressures
- NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
- Quick Knockdown Lower Pumps
- For easy disassembly and maintenance
- ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
- ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
- Model: Reactor
- Series: A-25
- Air Inlet Size (cm): 1.27
- Air Inlet Size (in): 1/2
- Air Inlet Size (mm): 12.7
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
- Application: Spray Foam
- Applicator Type: Manual
- Compatible Material: Plural-Component
- Component A Inlet Size (in): 3/4
- Component A Inlet Size (mm): 19.05
- Component A Thread Gender: Female
- Component A Thread Type: NPT
- Component B Inlet Size (in): 3/4
- Component B Inlet Size (mm): 19.05
- Component B Thread Gender: Female
- Component B Thread Type: NPT
- Component Type: Two Component
- Includes: Proportioner, Heated Hose
- Material Application: Polyurethane Foam
- Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
- Maximum Air Inlet Pressure (bar): 8.62
- Maximum Air Inlet Pressure (kPa): 862
- Maximum Air Inlet Pressure (psi): 125
- Maximum Flow Rate (kg/min): 11.34
- Maximum Flow Rate (lb/min): 25
- Maximum Fluid Temperature ( degree C): 88
- Maximum Fluid Temperature ( degree F): 190
- Maximum Fluid Viscosity (cP): 1500
- Maximum Fluid Temperature ( degree C): 88
- Maximum Fluid Temperature ( degree F): 190
- Maximum Fluid Viscosity (cP): 1500
- Maximum Hose Length (ft): 210
- Maximum Hose Length (m): 64
- Maximum Working Pressure (bar): 138
- Maximum Working Pressure (kPa): 13800
- Maximum Working Pressure (MPa): 14
- Maximum Working Pressure (psi): 2000
- Minimum Fluid Viscosity (cP): 250
