Parts
KIT, O-RING
GG 24H281
KIT, O-RING
KIT INCLUDES: O-RING, 111, VITON EXTREME [QTY. 11 ]
Kit, Cutter Cover
GG 24H282
KIT, CUTTER COVER
KIT INCLUDES: COVER, CUTTER, MACHINED [QTY. 1], RING, SNAP [QTY. 1], WASHER, LOCK [QTY. 1], KNOB, COVER RELEASE [QTY. 1], SCREW, SHLDR, SHC, 6-32X0.25L [QTY. 1], PLATE, CUTTER COVER [QTY. 1], SCREW, CAP, SH, 6-32X.25LG, SST [QTY. 2], DEFLECTOR, CHUTE, OPEN, RS, EX CHOPPER [QTY. 1], SCREW, SHLDR, SHC, 6-32X0.125L [QTY. 1], WASHER, FLAT [QTY. 1], WASHER, LOCK, SPRING [QTY. 1], SEALANT, ANAEROBIC, BLUE [QTY. 1], LINER, RS GUN CHOPPER [QTY. 1]
CONTRACTOR FLAT TIP, SPRAY 623
GG 269623
CONTRACTOR FLAT TIP, SPRAY 623
Contractor Flat Tip, 623 The 623 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.023 inch orifice.
AA Tip, 011, 10 in pattern
GG AEM511
TIP,MANUAL,ES
Graco AEM511 AEM Fine Finish Spray Tips, 0.011 inch (0.279 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
RAC X LTX TIP, SPRAY, 631
GG LTX631
RAC X LTX TIP, SPRAY, 631
Graco LTX631 RAC X SwitchTip, 631
The Reverse-A-Clean (RAC) 631 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.031 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: LTX SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC X HandTite Tip Guard
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 1.03
- Maximum Flow Rate (L/min): 3.90
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.031
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
VALVE (48951-21)
IR 1702P-329
Valve for Ingersoll Rand 1702P, 212, 215, 2902P Series Impact Wrenches
Ball Bearing (End Plate)
IR 2235-97
Ball Bearing for Ingersoll Rand 2235 Series Impact Wrench
Product Application and Uses: For use with Ingersoll Rand 2235 Series Impact WrenchFor Use With
- 2235QPTIMAX
- 2235TIMAX-2
- 2235QTIMAX
- 2235QTIMAX-G
- 2235TIMAX-G
- 2235TIMAX
- 2235QTIMAX-2
- 2235TIMAX-R
- 2235PTIMAX
TUNE-UP KIT
IR 2235-TK1
Tune-up Kit for Ingersoll Rand 2235 Series Impact Wrench
Product Application and Uses: Tool Boot for 2235 Series impact wrenchesFor Use With
- 2235QPTIMAX
- 2235TIMAX-2
- 2235QTIMAX
- 2235QTIMAX-G
- 2235TIMAX-G
- 2235TIMAX
- 2235QTIMAX-2
- 2235TIMAX-R
- 2235PTIMAX
SCREW
IR 34SR-85
Screw Replacement Part for Ingersoll Rand 341, 441 Tamper
Product Application and Uses: For use with Ingersoll Rand 341 Series Air TampersFor Use With
- 341A2M
VANE PACK SET OF 5
IR 48254-42-5
Vane Pack Set of 5 for Ingersoll Rand Orbital Sander
Seat
IR MC121-3
Valve Seat Replacement Part for Ingersoll Rand 121, 772 Series Hammer
NEEDLE PACKAGE
IR PF2219-22-19
7" Needle Set, QTY 19 for Ingersoll Rand 125 Series Percussive Needle Scaler
For Use With- 125-A
- 180PG
- 180PG-KIT
