Parts

GG 25V053

GG 25V080

KIT, ACCESSORY, HAZ I/O CABLE

Graco 25V080 QUANTM Pump Input/Output (I/O) Cable

For use with QUANTM electric double diaphragm pumps that are certified for use in explosive athospheres or hazardous (classified) locations.

• For Use With: QUANTM Electric Double Diaphragm Pump

• Includes: 1 cable clamp assembly, 2 clamp fasteners, 1 ground fastener

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Minimum Operating Temperature ( degree C): -20
• Minimum Operating Temperature ( degree F): -4

GG 25V267

KIT, I30(QTC)SS, PT, PO, PT

Graco 25V267 QUANTM i30 Complete Fluid Repair Kit with SS Seat, PT Ball, PO Diaphragm and PT Seal

GG 25V370

GG 261500

GG 261868

GG 261875

GG 261901

GG 262026

GG 262370

GG 262711

GG 262805

MAGNUM SPRAYER, X7

Graco 262805 Magnum X7 Electric TrueAirless Sprayer

DIY homeowners and handymen will save time and money with the Magnum X7 with built-in cart. Tackle any interior project, exterior houses, fences and decks. The X7 supports a larger tip size for spraying heavier coatings and the convenient cart makes any painting project faster and easier.

• Hardened Stainless Steel Piston Pump - Delivers high pressure power to spray unthinned paints
• Flexible Suction Hose - Spray directly from 1 or 5 gallon paint container
• Convenient Cart - Easily move sprayer around on the job
• TrueAirless Spray Tip with SoftSpray Technology - greater control and less overspray with a wide range of coatings
• Power Flush Adapter - Connects to a garden hose for fast and easy cleaning
• PushPrime - Fast and reliable start-up every time
• Adjustable Pressure Control - Easy control of paint flow

• Model: Magnum
• Series: X7
• Product Series: Project

• Amperage (A): 9.0

• Compatible Tip Size (in): 0.009, 0.011, 0.013, 0.015, 0.017

• Engine Size (HP): 0.625

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35
• Fluid Outlet Thread Type: NPSM

• Frame Configuration: Cart

• Includes: SG2 Spray Gun, TrueAirless 515 Spray Tip, Spray Tip Guard, 1/4 in x 25 ft DuraFlex Hose, Pump Armor Storage Fluid (8 oz), Quick Start-Up Guide
• Inlet Paint Strainer: 35 Mesh Stainless Steel Screen

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.2

• Maximum Hose Length (ft): 100
• Maximum Hose Length (m): 30

• Maximum Tip Size (in): 0.017
• Maximum Tip Size Gun 1 (in): 0.017

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

• Minimum Generator Power (W): 2500

• Motor Type: Universal

• Number of Guns: 1

• Overall Height (cm): 94.0
• Overall Height (in): 37.0
• Overall Height (mm): 940
• Overall Length (cm): 49
• Overall Length (in): 19.3
• Overall Length (mm): 490
• Overall Width (cm): 38.9
• Overall Width (in): 15.3
• Overall Width (mm): 389

• Phase: 1

• Power Rating (HP): 0.625
• Power Rating (kW): 0.47
• Power Rating (W): 466
• Power Source: Electric
• Pressure Control Type: Adjustable

• Pump Rod Type: Hardened Stainless Steel
• Pump Sleeve Material: Stainless Steel

• Recommended Annual Usage (gal): 125

GG 269213

CONTRACTOR FLAT TIP, SPRAY

Graco 269213 Contractor Flat Tip, 213

The 213 Contractor Flat Tip is designed for narrower surfaces. The 213 Flat Tip has a 0.013 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.013

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269317

CONTRACTOR FLAT TIP, SPRAY 317

Graco 269317 Contractor Flat Tip, 317

The 317 Contractor Flat Tip is designed for narrow surfaces. The 317 Flat Tip has a 0.017 inch orifice and produces a 6 to 8 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 15
• Maximum Fan Width (in): 6
• Maximum Fan Width (mm): 203

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 6
• Minimum Fan Width (mm): 152

• Orifice Diameter (in): 0.017

• Pattern Size (in): 6 to 8
• Pattern Size (mm): 152.4 to 203.2

GG 269621

CONTRACTOR FLAT TIP, SPRAY

Graco 269621 Contractor Flat Tip, 621

The 621 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.021 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12

• Orifice Diameter (in): 0.021

GG 269627

CONTRACTOR FLAT TIP, SPRAY 627

Graco 269627 Contractor Flat Tip, 627

The 627 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.027 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.027

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269631

CONTRACTOR FLAT TIP, SPRAY 631

Graco 269631 Contractor Flat Tip, 631

The 631 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.031 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.031

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269717

CONTRACTOR FLAT TIP, SPRAY 717

Graco 269717 Contractor Flat Tip, 717

The 717 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.017 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.017

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269719

CONTRACTOR FLAT TIP, SPRAY 719

Graco 269719 Contractor Flat Tip, 719

The 719 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.019

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269819

CONTRACTOR FLAT TIP, SPRAY 819

Graco 269819 Contractor Flat Tip, 819

The 819 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.019

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 269827

CONTRACTOR FLAT TIP, SPRAY

Graco 269827 Contractor Flat Tip, 827

The 827 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.027 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.027

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 26A029

GG 26A035

GG 26A086

GG 26A130

PANEL, FLUID, WATER/ANTIFREEZE

Graco 26A130 ProDispense Fluid Panel Kit, Water Meter, light viscosity, average resolution

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for water and antifreeze applications.

• Turbine meter is compatible with water and antifreeze.

• Model: ProDispense