Parts

GG 257678

KIT, WIPER MAIN

KIT INCLUDES: WIPER, MAIN [QTY. 1], KIT INCLUDES: WIPER, MAIN [QTY. 1],

GG 257701

GG 258528

GG 258756

KIT, FTS,RTD,DUAL HOSE,SST

KIT INCLUDES: SENSOR, FLUID TEMP RTD [QTY. 2], ADAPTER, 5/16 JIC X 1/4 NPT [QTY. 1], ADAPTER, 3/8 JIC X 1/4 NPT [QTY. 1], ADAPTER, 1/2 JIC X 1/4 NPT [QTY. 1], ADAPTER, 5/8 JIC X 1/4 NPT [QTY. 1], FITTING, SWIVEL, NPT X JIC [QTY. 1], FITTING, SWIVEL, 1/4NPT X 6 JIC [QTY. 1], FITTING, SWIVEL, 1/4NPT X 8 JIC [QTY. 1], FITTING, SWIVEL, 1/4NPT X 10 JIC [QTY. 1]

GG 258761

GG 258992

GG 25A100

GG 25A108

KIT,INJECTOR,COLOR

Graco 25A108 Color Injector Kit

KIT INCLUDES: INJECTOR, ASSY, COLOR [QTY. 1], HOUSING, BODY, QD, 1/4NPTM, CRPLT, BRS [QTY. 1], FITTING, ELBOW, 90, JIC06X1/4NPT, MF [QTY. 1], TAPE, SEALANT, CERAMIC, .50 in.X50 ft. [QTY. 1], CABLE, 5PIN, MALE/FEMALE, 4.0 M [QTY. 1], CORD SET, EURO/MALE, DIN/FEMALE, REV [QTY. 1]

• Model: LSR

GG 25A116

GG 25A692

GG 25A860

KIT, 1050 IND PV, PT, PT, PT

GG 25A997

MODULE, STACK, LG MXR, VLV

Graco 25A997 Straight Thread Single Pass Mixing Stack with Material Valves

Straight Thread Single-Pass Mixing Stack designed for Graco F-5 two-component LSR equipment.

• Reduce pressure drops

  High-flow material passages on the regulator are 225% larger which reduces pressure drops through the barrel stack.

  • Easier to clean + assemble- No tapered national pipe thread (NPT) threads and regulator and mixer enhancements for greater clearance. Reduces cleaning time by 50 percent so you can spend more time producing parts.

  
  

  • Model: LSR
  • Air Line Tube Length (ft): 3
  • Air Line Tube Length (m): 0.915
  • Air Line Tube Outside Diameter (cm): 0.8
  • Air Line Tube Outside Diameter (in): 5/16
  • Air Line Tube Outside Diameter (mm): 8
  • For Use With: Fluid Automation F4 Series
  • Includes: Manifold, Mixer and Regulator, Manifold On/Off Valves, Solenoid Block With Two Solenoids
  • Number of Pieces: 12

GG 25B034

GG 25B185

GG 25B296

KIT, PROCONTROL 1KE PLUS

Graco 25B296 ProControl 1KE Plus Closed Loop Fluid Pressure/Flow & Atomizing Air Control, ADCM, G3000, Regulators, Pressure Transducer, 2 I/P's

This ProControl 1KE Plus package includes everything manufacturers need to actively manage one component (1K) fluids, improve spray performance, and increase efficiency.

• Atomizing air control helps manual or automatic paint spray guns consistently produce a high quality finish.
• Closed loop control automatically and precisely adjusts fluid pressure or flow rate to maintain optimal spray performance, minimizing waste and maximizing quality.
• Flow monitor tracks precisely how much material goes through fluid lines, so that you can improve finishing processes and reduce waste.
• Full feature fluid management package works with manual paint spray guns or automatic spray applicators.

• Model: ProControl
• Series: 1KE Plus

• Control Box Voltage (V dc): 15

• Flow Control Type: Fluid Flow Control with Atomizing Air Control

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (psi): 100

• Maximum Fluid Inlet Pressure (bar): 7
• Maximum Fluid Inlet Pressure (psi): 100

• Maximum Fluid Inlet Pressure (bar): 7
• Maximum Fluid Inlet Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 120

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (MPa): 0.7
• Maximum Working Pressure (psi): 100

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Power Source: Order separate

GG 25B395

GG 25B471

MODULE,GATEWAY,ETHERNET

GG 25C164

GG 25C198

GG 25C207

GG 25C226

GG 25C280

GG 25C283

GG 25C315

GG 25C554