Parts
REACTOR A-25 PROPORTIONER, WHEELS, CYCLE COUNT
GG 262614
GG 262614
REACTOR A-25 PROPORTIONER, WHEELS, CYCLE COUNT
Reactor A-25 Proportioner with Wheels, DataTrakThe Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.
Maintains temperature setpoints for better yield Maintains consistent output pressure for uniform spray pattern Easy-to-service fluid section reduces maintenance and increases productivity Best choice for affordability and durabilityDataTrak Control
- Resettable counter tracks material usage
Three Heat Zones
- Three independent heat zones – ISO, resin and hose heat
- Provide accurate heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controls
Recirculation Manifold
- A quick, easy way to balance system pressures
NXT Air Motor
- Low air consumption for increased efficiency
- Muffler provides low operating noise levels
- Air valve provides smooth and rapid changeover
Quick Knockdown Lower Pumps
- For easy disassembly and maintenance
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
ISO Pump Lube System
- Prevents isocyanate crystallization on the pump seal and shaft
$20,970.00
CONTRACTOR FLAT TIP, SPRAY 635
GG 269635
GG 269635
CONTRACTOR FLAT TIP, SPRAY 635
Contractor Flat Tip, 635 The 635 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.035 inch orifice.
$11.40
SD SERIES SDP8 VALVE, FC, 1/2NPT, FLEX, AF
GG 26C355
GG 26C355
SD SERIES SDP8 VALVE, FC, 1/2NPT, FLEX, AF
Graco 26C355 SDP8 Series Electronic Preset Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Upgradeable—SD Preset meters are compatible with PULSE FC fluid control system
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Reliable—time-tested Graco engineering
- Durable—Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDP8
- Compatible Material: Antifreeze, Oil, ATF
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Flexible Extension
- Inlet Size (cm): 1.27
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 8
- Maximum Flow Rate (L/min): 30
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Oil Automatic Quick-Close
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Product Type: Meter
- Recommended Environment: Indoor
$1,540.00
SD SERIES SDP18 VALVE, FC, 3/4NPT, FLEX, OIL
GG 26C361
GG 26C361
SD SERIES SDP18 VALVE, FC, 3/4NPT, FLEX, OIL
Graco 26C361 SDP18 Series Electronic Preset Oil/Antifreeze Meter - Flexible Extension - 3/4 in. Inlet
Graco’s premium SD meters were designed from the ground up to provide the best user experience. These robust meters feature high flow, improved ergonomics and a large high-contrast LCD screen to make viewing dispense amounts easy in all lighting conditions.
- Upgradeable—SD Preset meters are compatible with PULSE FC fluid control system
- Large, Intuitive Display—high-contrast display for low and bright light conditions
- Long valve life—cartridge spool valve specifically designed to reduce wear and reduce costly down time
- Reliable—time-tested Graco engineering
- Durable—Thick cast aluminum body allows this meter to endure harsh, heavy-duty applications
- Long battery life—uses 4 AA easy-to-replace batteries
- Model: SDP18
- Compatible Material: Oil, Antifreeze, ATF, Gear Oil
- Dispense Type: Preset
- Display Type: Electronic
- Extension Type: Flexible
- Fluid Inlet Thread Gender: Female
- Fluid Outlet Thread Gender: Female
- Includes: Nozzle, Flexible Extension
- Inlet Size (cm): 1.91
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: NPT
- Maximum Flow Rate (GPM): 18
- Maximum Flow Rate (L/min): 68
- Maximum Operating Temperature (°C): 70
- Maximum Operating Temperature (°F): 158
- Maximum Recorded Dispense: 9999
- Maximum Storage Temperature (°C): 70
- Maximum Storage Temperature (°F): 158
- Maximum Working Pressure (bar): 103.4
- Maximum Working Pressure (kPa): 10340
- Maximum Working Pressure (MPa): 10.3
- Maximum Working Pressure (psi): 1500
- Meter Accuracy (%): ±0.5
- Meter Technology: Oval Gear
- Metering Gun Weight (kg): 2.4
- Metering Gun Weight (lb): 5.3
- Minimum Flow Rate (GPM): 0.25
- Minimum Flow Rate (L/min): 0.9
- Minimum Operating Temperature (°C): -16
- Minimum Operating Temperature (°F): 4
- Nozzle Type: Manual
- Outlet Thread Type: Straight Thread O-Ring Boss
- Overall Height (cm): 14.6
- Overall Height (in): 5.75
- Overall Height (mm): 146
- Overall Length (cm): 33
- Overall Length (in): 13
- Overall Length (mm): 330
- Overall Width (cm): 9.5
- Overall Width (in): 3.75
- Overall Width (mm): 95
- Product Type: Meter
- Recommended Environment: Indoor
$1,650.00
RAC 5 TIP, SPRAY
GG 286319
GG 286319
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 319 The Reverse-A-Clean (RAC) 319 RAC 5 SwitchTip is designed for narrow surfaces and thick materials. The 319 SwitchTip has a 0.019 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
$62.75
RAC 5 TIP, SPRAY
GG 286425
GG 286425
RAC 5 TIP, SPRAY
Graco 286425 RAC 5 SwitchTip, 425
The Reverse-A-Clean (RAC) 425 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 25.4
- Maximum Fan Width (in): 8
- Maximum Fan Width (mm): 254
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.54
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 8
- Minimum Fan Width (mm): 203
- Orifice Diameter (in): 0.025
- Pattern Size (in): 8 to 10
- Pattern Size (mm): 203.2 to 254
$62.75
RAC 5 TIP, SPRAY
GG 286455
GG 286455
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 455 The Reverse-A-Clean (RAC) 455 RAC 5 SwitchTip produces an 8 to 10 inch fan and has a 0.055 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
RAC 5 TIP, SPRAY
GG 286511
GG 286511
RAC 5 TIP, SPRAY
Graco 286511 RAC 5 SwitchTip, 511
The Reverse-A-Clean (RAC) 511 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.011 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.12
- Maximum Flow Rate (L/min): 0.45
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.011
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$62.75
RAC 5 TIP, SPRAY
GG 286529
GG 286529
RAC 5 TIP, SPRAY
Graco 286529 RAC 5 SwitchTip, 529
The Reverse-A-Clean (RAC) 529 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.029 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 0.9
- Maximum Flow Rate (L/min): 3.41
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.029
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$62.75
RAC 5 TIP, SPRAY
GG 286535
GG 286535
RAC 5 TIP, SPRAY
Graco 286535 RAC 5 SwitchTip, 535
The Reverse-A-Clean (RAC) 535 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.
- Most Widely Used Reversible Spray Tip on the Market (Black Handle)
Used for residential and commercial applications
Includes OneSeal for most common coatings
Large selection of tip sizes available
Easy to identify laser stamped tip size
Solvent seal available when using extremely hot solvents
- Model: RAC 5
- Series: SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC 5 HandTite Tip Guard
- Maximum Fan Width (cm): 30.5
- Maximum Fan Width (in): 10
- Maximum Fan Width (mm): 305
- Maximum Flow Rate (GPM): 1.31
- Maximum Flow Rate (L/min): 4.96
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 10
- Minimum Fan Width (mm): 254
- Orifice Diameter (in): 0.035
- Pattern Size (in): 10 to 12
- Pattern Size (mm): 254 to 304.8
$62.75
RAC 5 TIP, SPRAY
GG 286543
GG 286543
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 543 The Reverse-A-Clean (RAC) 543 RAC 5 SwitchTip produces a 10 to 12 inch fan and has a 0.043 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
KIT, FLTR, SG20/SG PRO, 60 MESH
GG 288749
GG 288749
KIT, FLTR, SG20/SG PRO, 60 MESH
60 Mesh Gun Filter Spray gun filters improve the look of the final finish by removing unwanted debris from the paint. 60 mesh filter is for material such as primer and latex paint. Gun filters help remove debris from the coating protecting the pump, reducing tip clogging and providing a better quality finish Replace the filter if clogged more than 20% Prolong pump life and reduce tip clogging by cleaning and replacing the filter regularly Used for latex, enamels (latex) coatings Clean after every use For use with Graco spray gun models SG10, SG20, SG Pro, SG2 and SG3
$12.80
KIT, RELIEF VLV VIKING PUMP
GG 557998
GG 557998
KIT, RELIEF VLV VIKING PUMP
Graco 557998 Meter-Flo® Relief Valve Repair Kit
Application: For use with Meter-Flo Pumps.
- Meter-Flo Relief Valve Repair Kit - 540-800-XX1 Models
- Lubriquip part number 560-001-920
- For Use With: Viking Pumps
- Includes: Poppet, Cap, Spring, Hardware
- Kit Type: Repair Kit
$76.75
MSP VALVE, ASSY MSP 05S
GG 562711
GG 562711
MSP VALVE, ASSY MSP 05S
Graco 562711 Trabon® MSP Modular Divider Valve - MSP-05S - 0.010 in³ (0.16 cm³)
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
- Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
- Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
- Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
- Lubriquip part number 106-100-015
- Model: Trabon
- Series: MSP
- Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery
- Compatible Material: Oil, Grease
- Cycle Indicator: None
- Discharge Per Piston Stroke (in³): 0.010
- Divider Valve Series: MSP
- Material: Carbon Steel
- Maximum Cycle Rate (cycles/min): 200
- Maximum NLGI Grade: #2
- Maximum Operating Temperature (°C): 176
- Maximum Operating Temperature (°F): 350
- Maximum Working Pressure (bar): 241
- Maximum Working Pressure (kPa): 24100
- Maximum Working Pressure (psi): 3500
- Minimum Working Pressure (bar): 14
- Minimum Working Pressure (psi): 200
- Number of Outlets: 1
$58.00
MSP VALVE, ASSY MSP 05T
GG 562720
GG 562720
MSP VALVE, ASSY MSP 05T
Trabon® MSP Modular Divider Valve - MSP-05T - 0.005 in³ (0.08 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-175
$58.00
MSP VALVE, ASSY MSP 30T
GG 562725
GG 562725
MSP VALVE, ASSY MSP 30T
Trabon® MSP Modular Divider Valve - MSP-30T - 0.030 in³ (0.49 cm³)The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best!
Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event. Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting Built-in outlet check valves ensure accurate lube delivery every time Lubriquip part number 106-100-225
$58.00
VALVE, RELIEF, 1/4 NPT, 3000 PSI
GG 563161
GG 563161
VALVE, RELIEF, 1/4 NPT, 3000 PSI
Graco 563161 Automatic Relief Indicator for MX Divider Valves, 3000 psi (207 bar)
Keep your machine running while lubrication gets to critical points. These performance indicators pinpoint lube line blockages but allow the lube system to continue to supply lubrication to points that are not blocked.
- No time or effort required for reset after blockage is cleared
- Easy information on blocked lines, high system pressure or blocked bearings
- Works with MSP, MX, MXP, MJ and MHH divider valves
- Model: Trabon
- Application: In-Plant Machinery, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.25
- Indicator Type: Automatic Relief Indicators
- Maximum Working Pressure (bar): 207
- Maximum Working Pressure (kPa): 20700
- Maximum Working Pressure (MPa): 21
- Maximum Working Pressure (psi): 3000
- Overall Length (cm): 3
- Overall Length (in): 1.37
- Overall Length (mm): 35
$30.20
INDICATOR, MANUAL RESET, O-RING, 2500 PSI
GG 563258
GG 563258
INDICATOR, MANUAL RESET, O-RING, 2500 PSI
Graco 563258 Reset Indicator with Memory, 2500 psi (172 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves
Easy information on blocked lines, high system pressure or blocked bearings.
- Provides quick troubleshooting tool with visual indication
- No tools for reset or parts to replace after indication
- Easy information on blocked lines, high system pressure or blocked bearings
- Model: Trabon
- Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment
- Compatible Material: Oil, Grease
- Connection Size (in): 0.125
- For Use With: MSP, MXP, and MHH Divider Valves
- Indicator Type: Reset Indicator with Memory
- Maximum Working Pressure (bar): 172
- Maximum Working Pressure (kPa): 17200
- Maximum Working Pressure (MPa): 17
- Maximum Working Pressure (psi): 2500
$26.70
KIT, BURST DISK 1450 PS1 YELLOW 6PK
GG 563962
GG 563962
KIT, BURST DISK 1450 PS1 YELLOW 6PK
Blowout Disc Kit - (6) Yellow, 1450 psi, 11/16 in.Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
Requires replacement of the rupture disc to restart the lube system.
Easy information on blocked lines, high system pressure or blocked bearings.
Replacement Rupture Packs of 6 (11/16 inch / 17.5 mm diameter discs)
1,450 psi - yellow
Lubriquip part number 560-900-270
$27.90
Metering Valve
GG C02022
GG C02022
VALVE, AUTOMATIC METER
Graco C02022 Automatic Meter Valve
- Air Inlet Size (cm): 0.3175
- Air Inlet Size (in): 1/8
- Air Inlet Size (mm): 3.175
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
$1,350.00
KIT, 1040 FG SS, PT, PT, PT
GG FK1111
GG FK1111
KIT, 1040 FG SS, PT, PT, PT
SaniForce 1040 FG Complete Fluid Repair Kit with SS Seat, PT Ball, PT Diaphragm and PT Seal
$735.00
LOWER, CHEMICAL, 30, SST, UCUP
GG L030S1
GG L030S1
LOWER, CHEMICAL, 30, SST, UCUP
Graco L030S1 Z-Pump, 30 cc, Severe Duty, S1
Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.
- Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
- Precision control eliminates pressure spikes and guarantees on ratio dispense.
- Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
- Model: Z-Pump
- Series: S1
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Industrial
- Ball Check Size (in): 1
- Ball Material: Silicon Nitride
- Coating Type: Severe Duty
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: SAE
- For Use With: HFR
- Maximum Flow Rate (GPM): 0.48
- Maximum Operating Temperature (°F): 180
- Maximum Output (cm³): 30
- Maximum Pump Speed (CPM): 60
- Maximum Viscosity (cP): 3000000
$11,740.00
LOWER, CHEMICAL, 50, SST, UCUP
GG L050S1
GG L050S1
LOWER, CHEMICAL, 50, SST, UCUP
Graco L050S1 Z-Pump, 50 cc, Severe Duty, S1
Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.
- Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
- Precision control eliminates pressure spikes and guarantees on ratio dispense.
- Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
- Model: Z-Pump
- Series: S1
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Industrial
- Ball Check Size (in): 1
- Ball Material: Silicon Nitride
- Coating Type: Severe Duty
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: SAE
- For Use With: HFR
- Maximum Flow Rate (GPM): 0.79
- Maximum Operating Temperature (°F): 180
- Maximum Output (cm³): 50
- Maximum Pump Speed (CPM): 60
- Maximum Viscosity (cP): 3000000
$11,600.00
LOWER, CHEMICAL, 90, SST, UCUP
GG L090S1
GG L090S1
LOWER, CHEMICAL, 90, SST, UCUP
Z-Pump, 90 cc, Severe Duty, S1 Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls. Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives. Precision control eliminates pressure spikes and guarantees on ratio dispense. Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
$11,740.00
LOWER, CHEMICAL, 120, SST, UCUP
GG L120S1
GG L120S1
LOWER, CHEMICAL, 120, SST, UCUP
Graco L120S1 Z-Pump, 120 cc, Severe Duty, S1
Z-Pumps are positive displacement pump components for use with the Graco meter, mix, and dispense systems and are ideal for two-component sealant and adhesives requiring precision ratio, flow, and volume controls.
- Severe Duty coatings and 1 inch (2.54 cm) checks easily manage material wear from silicones, sealants, epoxies, foam, and structural adhesives.
- Precision control eliminates pressure spikes and guarantees on ratio dispense.
- Pump seals are the only wear parts, which reduces maintenance downtime and repair costs.
- Model: Z-Pump
- Series: S1
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Industrial
- Ball Check Size (in): 1
- Ball Material: Silicon Nitride
- Coating Type: Severe Duty
- Feed Type: Pressure Feed
- Fluid Inlet Size (cm): 1.905
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: SAE
- For Use With: HFR
- Maximum Flow Rate (GPM): 1.90
- Maximum Operating Temperature (°F): 180
- Maximum Output (cm³): 120
- Maximum Pump Speed (CPM): 60
- Maximum Viscosity (cP): 3000000
$10,980.00