Parts
Aa Carbide Tip Assembly, .011 X 8"
BB 114-01108
BB 114-01108
Aa Carbide Tip Assembly, .011 X 8"
$165.00
Tight Seal Supply Air Filter, (20 X 20 X 1)
BB 29-486
BB 29-486
Tight Seal Supply Air Filter, (20 X 20 X 1)
$319.00
KIT, RETRO, 5-10 GA PAIL, RP MTR
GG 19Y592
GG 19Y592
KIT, RETRO, 5-10 GA PAIL, RP MTR
Radial Piston Air Motor Retrofit Kit for 5 gallon (18 L) or 10 gallon (38 L) pail agitators. Pail cover, agitator shaft and blade not included. This kit makes it easy to replace an existing rotary vane motor on a 5 gallon (18 liter) or 10 gallon (38 L) pail agitator with a radial piston air motor. For wood (top coat, primer) and general finishing applications Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications. Air line lubrication not required Easy to maintain and service Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA Pail cover, agitator shaft and blade sold separately
$1,645.00
KIT, ACCESSORY, PRESSURE ROLLER
GG 245397
GG 245397
KIT, ACCESSORY, PRESSURE ROLLER
EvenFlow In-Line Valve Pressure Roller Assembly Painting with a roller has never been easier. The EvenFlow Pressure Roller with In-Line Valve eliminates the need to stop and dip your roller into the messy paint tray while giving you the best angle to roll with. Includes everything you need to start rolling with an airless sprayer.
$427.00
Kit, Motor, Air
GG 24E511
GG 24E511
KIT, MOTOR, AIR
KIT INCLUDES: MOTOR, AIR [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], FITTING, ELBOW, 1/8NPT, 3/8TUBE, BRAS [QTY. 1], PLUG, PIPE [QTY. 1], TUBE, POLYURETHANE, RND [QTY. 0.7 ]
$935.00
RAC 5 Tip, Spray
GG 286315
GG 286315
RAC 5 Tip, Spray
RAC 5 SwitchTip, 315 The Reverse-A-Clean (RAC) 315 RAC 5 SwitchTip is designed for narrow surfaces. The 315 SwitchTip has a 0.015 inch orifice and produces a 6 to 8 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics. Most Widely Used Reversible Spray Tip on the Market (Black Handle)- Used for residential and commercial applications
- Includes OneSeal for most common coatings
- Large selection of tip sizes available
- Easy to identify laser stamped tip size
- Solvent seal available when using extremely hot solvents
$62.75
Tip, 517
GG AAM517
GG AAM517
TIP, AAM517
Graco AAM517 Fine Finish Spray Tip for G15 and G40 Guns, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
Precision-Cut Flat Tips are designed with thinner stains and lacquers in mind to produce the best atomization for the ultimate smooth finish on furniture and similar applications.
Application: Use Graco Flat Tips where finish quality is the #1 application requirement. These tips provide an HVLP-like finish with the ability to easily adjust the fan width on the gun.- Delivers The Softest Spray Fan
- Air coming out of the cap is closer and behind the orifice of the tip
- Zero air cap buildup
- Better atomization
- Softer edges and breaks up spits
- Fan Width Control
- Provides application flexibility to tackle any finishing job
- Added Filtration
- Includes an additional filter to reduce tip clogs
$161.50
