Parts

GG 563096

FILTER, SPIN-ON 25 MICRON NPT

Spin-On Filter Assembly - 25 Micron, NPT, External 150 psi Relief

25 micron Spin-On Filter Assembly, NPT, External 150 psi (10.3 bar) Relief

Lubriquip part number 473-000-275

GG 563101

Strainer, Intake Assy

GG 563102

STRAINER, FILL POINT 100 MESH

General Accessories - Oil/Grease Strainers - 149 micron, 100 Mesh Fill-Point Strainer For use with Oil and Grease Strainers.

149 micron, 100 Mesh Fill-Point Strainer

Lubriquip part number 473-020-468

GG 563103

STRAINER, FILL POINT 325 MESH

General Accessories - Oil/Grease Strainers - 44 micron, 100 Mesh Fill-Point Strainer For use with Oil and Grease Strainers.

44 micron, 325 Mesh Fill-Point Strainer

Lubriquip part number 473-020-469

GG 563120

GEAR, DRV END ROT DBL RED, 400

Double Reduction End Rotary Gear Drive - 400:1 Lubriquip part number 481-760-004

GG 563121

Gear, Drv End Rot Dbl Red, 100

GG 563122

GEAR, DRV END ROT DBL RED, 200

Double Reduction End Rotary Gear Drive - 200:1 Lubriquip part number 481-760-011

GG 563146

SWIVEL, 90 1/4 PORT NITRILE

Compact 90º Angle Swivel - 1/4 inch, Nitrile

90º Compact Swivel - 1/4 inch (6.4 mm)

Lubriquip part number 501-255-000 Trabon part number 1255

GG 563147

SWIVEL, 180 1/4 PORT NITRILE

Compact 180º Straight Swivel - 1/4 inch, Nitrile

180º Compact Swivel - 1/4 inch (6.4 mm)

Lubriquip part number 501-256-000 Trabon part number 1256

GG 563149

SWIVEL, 90 1/8 PORT SST NITRILE

Compact 90º Angle Swivel - 1/8 inch, Stainless Steel, Nitrile

Compact Swivel - Maximum pressure is 500 psi, SST

Lubriquip part number 501-257-190 Trabon part number 1257-SS

GG 563154

SWIVEL, BEARING, STRAIGHT, 1/2 NPT

Ball Bearing 180º Straight Swivel - 1/2 inch

180º Straight Swivel - 1/2 inch (12.7 mm)

Lubriquip part number 503-707-001

GG 563269

SWITCH, MICRO BRKT SPDT MGO

Cycle Switch (SPDT) and Bracket Assembly - MGO Divider Valves

Monitors piston movement to ensure completed lubrication cycle–must have cycle indicator pin

Provides positive feedback based on actual metering piston movement

Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install

Able to be set for normally open or normally closed operation

Lubriquip part number 510-250-000 Trabon part number 10250

GG 563292

SWITCH, BLOWOUT / SW

Lubriquip part number 511-573-030

GG 563313

Manifold, Wall Pump

GG 563325

SWITCH, SW BLOWOUT HI PRESS P2

High Pressure Blowout Switch for 5 pt. or 5 lb. Reservoirs For use with Modu-Flo Pneumatic Pumps.

High Pressure Blowout Switch for 5 pt or 5 lb Reservoirs

Lubriquip part number 521-001-190

GG 563328

SWITCH, SW HI PRESS

High Pressure Switch for all Reservoirs

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment.

Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly

LED lights visually display pressure switch functions

Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers

Moisture resistant and factory set to ensure accuracy for long life and reliability

Sends an alarm signal to alert either a high or low pressure condition

Available for hydraulic pressures from 10 to 4700 psi

1/4 in NPT thread allows quick connection to injector systems

Lubriquip part number 521-001-220

GG 563339

TIMER, ASSY SOLID STATE TANK

Solid State AC Timer for all Tanks For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for all Tanks

Lubriquip part number 521-004-500

GG 563340

TIMER, ASSY SOLID STATE 5 LB

Solid State AC Timer for 5 pt. and 5 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 5 pt and 5 lb Cylindrical Reservoirs

Lubriquip part number 521-004-510

GG 563341

TIMER, ASSY SOLID STATE 12 LB

Solid State AC Timer for 6, 12 and 20 pt., 6, 12 and 20 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 6, 12 and 20 pt, 6, 12 and 20 lb Cylindrical Reservoirs

Lubriquip part number 521-004-520

GG 563384

SWITCH, SW HI PRESS BLOWOUT 1450

High-Pressure Blowout Switch, 1,450 psi - Oil

High-Pressure Blowout Switch, 1,450 psi (100 bar), Oil

Lubriquip part number 521-700-390

GG 563385

SWITCH, SW HI PRESS BLOWOUT 2350

High-Pressure Blowout Switch, 2,350 psi - Grease

High-Pressure Blowout Switch, 2,350 psi (162 bar), Grease

Lubriquip part number 521-700-400

GG 563476

SWITCH, PROX MXP SOFT SEAL 3PIN

Field Sensitive Magnetic (FSM) Proximity Switch for MXP and MX divider valves, 3 pin BH connector A proximity switch is a magnetically operated sensing device used to detect cycles of a Series Progressive Divider Valve. Install a proximity switch in place of a piston enclosure plug to allow a PLC or lubrication controller to monitor cycles of the divider valve assembly. O-ring sealed proximity switch for Trabon MXP and MX divider valves. Compatible with 24 VDC and 110/240 VAC 3 pin BH electrical connector mates to cable 558021 (6 ft/1.83 m) and 558022 (12 ft/3.66 m) UL and CSA Approved – search their respective website for the certifications or contact Graco Technical Assistance Maximum cycle 125 cpm 2A @ 240 VAC; 4A @ 110 VAC; 3A @ 24 VDC Lubriquip part number 527-005-520

GG 563495

Switch, Prox 24Vdc 4 Pin Mgo