Parts

GG 563328

SWITCH, SW HI PRESS

High Pressure Switch for all Reservoirs

Turns off your pump or controller and activates venting once the lube system reaches the desired pressure level.

Durable design allows operation in harsh environment.

Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly

LED lights visually display pressure switch functions

Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers

Moisture resistant and factory set to ensure accuracy for long life and reliability

Sends an alarm signal to alert either a high or low pressure condition

Available for hydraulic pressures from 10 to 4700 psi

1/4 in NPT thread allows quick connection to injector systems

Lubriquip part number 521-001-220

GG 563339

TIMER, ASSY SOLID STATE TANK

Solid State AC Timer for all Tanks For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for all Tanks

Lubriquip part number 521-004-500

GG 563340

TIMER, ASSY SOLID STATE 5 LB

Solid State AC Timer for 5 pt. and 5 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 5 pt and 5 lb Cylindrical Reservoirs

Lubriquip part number 521-004-510

GG 563341

TIMER, ASSY SOLID STATE 12 LB

Solid State AC Timer for 6, 12 and 20 pt., 6, 12 and 20 lb. Cylindrical Reservoirs For use with Modu-Flo® Pneumatic Pumps.

Solid State AC Timer for 6, 12 and 20 pt, 6, 12 and 20 lb Cylindrical Reservoirs

Lubriquip part number 521-004-520

GG 563384

SWITCH, SW HI PRESS BLOWOUT 1450

High-Pressure Blowout Switch, 1,450 psi - Oil

High-Pressure Blowout Switch, 1,450 psi (100 bar), Oil

Lubriquip part number 521-700-390

GG 563385

SWITCH, SW HI PRESS BLOWOUT 2350

High-Pressure Blowout Switch, 2,350 psi - Grease

High-Pressure Blowout Switch, 2,350 psi (162 bar), Grease

Lubriquip part number 521-700-400

GG 563476

SWITCH, PROX MXP SOFT SEAL 3PIN

Field Sensitive Magnetic (FSM) Proximity Switch for MXP and MX divider valves, 3 pin BH connector A proximity switch is a magnetically operated sensing device used to detect cycles of a Series Progressive Divider Valve. Install a proximity switch in place of a piston enclosure plug to allow a PLC or lubrication controller to monitor cycles of the divider valve assembly. O-ring sealed proximity switch for Trabon MXP and MX divider valves. Compatible with 24 VDC and 110/240 VAC 3 pin BH electrical connector mates to cable 558021 (6 ft/1.83 m) and 558022 (12 ft/3.66 m) UL and CSA Approved – search their respective website for the certifications or contact Graco Technical Assistance Maximum cycle 125 cpm 2A @ 240 VAC; 4A @ 110 VAC; 3A @ 24 VDC Lubriquip part number 527-005-520

GG 563495

Switch, Prox 24Vdc 4 Pin Mgo

GG 563504

Switch, Assy Elect Lube Sentry

GG 563506

Switch, Pneu Lube Sentry

GG 563554

Clevis, Assy

GG 563642

Harness, Sol Wiring 22Ft

GG 563966

KIT, B/O DISC 2950 BLUE

Graco 563966 Blowout Disc Kit - (6) Blue, 2950 psi, 11/16 in.

• Used in conjunction with system pressure switch–can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 2,940 psi - blue
• Lubriquip part number 560-900-320

• Color: Blue

• Maximum Working Pressure (bar): 203
• Maximum Working Pressure (kPa): 20326
• Maximum Working Pressure (MPa): 20.3
• Maximum Working Pressure (psi): 2950

• Number of Pieces: 6

• Overall Diameter (cm): 1.7
• Overall Diameter (in): 0.688

• Overall Diameter (mm): 17