Parts
GASKET, RAC 5, 5 PACK
GG 243281
GG 243281
GASKET, RAC 5, 5 PACK
Graco 243281 RAC 5 One Seal, 5 pack
Compatible with most materials. Easy installation withtools. Use only with RAC 5 SwitchTips and Guards.
- Model: RAC 5
- Series: Gasket
- Compatible Tip Type: RAC 5
- For Use With: RAC 5 HandTite Tip Guard
- Material: Steel, Rubber
$31.00
KIT, ROD, DISPL, WETCUP, 75CC
GG 24A645
GG 24A645
KIT, ROD, DISPL, WETCUP, 75CC
Merkur Piston Rod Assembly Kit for LW075A Merkur Displacement Pump Pump Displacement Rod Size: 75cc; Rod Coating: Ultralife
$711.00
RAC 5 TIP, SPRAY
GG 286817
GG 286817
RAC 5 TIP, SPRAY
RAC 5 SwitchTip, 817 The Reverse-A-Clean (RAC) 817 RAC 5 SwitchTip produces a 16 to 18 inch fan and has a 0.017 inch orifice. Reverse the SwitchTip to easily clear clogs.Most Widely Used Reversible Spray Tip on the Market (Black Handle)
$62.75
710 REMOTE, NO NEEDLE, NO SOLENOID
GG A9A01019
GG A9A01019
710 REMOTE, NO NEEDLE, NO SOLENOID
710 Dispensit ValveThe Model 710 Dispense Valve is an On/Off valve designed for a continuous flow of viscous material through a dispense needle in automatic, semi-automatic or manual applications.
Designed to accurately dispense beads of single-component materials such as silicones and epoxies for sealing, bonding and gasketing applications.
Features and Benefits:
- Dispenses a range of material viscosities and flow rates
- Offers continuous bead dispensing or rapid on/off cycling without reload time
- High-feed pressure-rated needle valve design provides higher flow rates even for narrow bead profiles
- Simple on/off control via PLC for integrated solenoid versions or versions for external pneumatic control
$4,120.00
RAC X LTX TIP, SPRAY, 625
GG LTX625
GG LTX625
RAC X LTX TIP, SPRAY, 625
Graco LTX625 RAC X SwitchTip, 625
The Reverse-A-Clean (RAC) 625 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.025 inch orifice. Reverse the SwitchTip to easily clear clogs.
Application: Used for residential, commercial or industrial applications.- Best Tip on the Market
Longest lasting fan pattern
Highest quality finish with a consistent spray pattern
- Easy to Identify Tip Size
Large raised tip size numbers are always legible – even when covered with paint
- Superior Tip Design
Locking tab ensures tip stays securely in guard
Snaps tip in spray or reverse position
OneSeal tip gasket installs with no tools
Solvent seal available when using extremely hot solvents
- Model: RAC X
- Series: LTX SwitchTip
- Compatible Material: Lacquer to Mastic, Latex Paint
- For Use With: RAC X HandTite Tip Guard
- Maximum Fan Width (cm): 30
- Maximum Fan Width (in): 12
- Maximum Fan Width (mm): 356
- Maximum Flow Rate (GPM): 0.67
- Maximum Flow Rate (L/min): 2.54
- Maximum Working Pressure (bar): 280
- Maximum Working Pressure (kPa): 28000
- Maximum Working Pressure (psi): 4050
- Minimum Fan Width (in): 12
- Minimum Fan Width (mm): 305
- Orifice Diameter (in): 0.025
- Pattern Size (in): 12 to 14
- Pattern Size (mm): 304.8 to 355.6
$65.25
REVERSE VALVE SPRING
IR 131-664
IR 131-664
Reverse Valve Spring Replacement Part for Ingersoll Rand 231 Series Impact Wrench
$15.00
HAMMER MECHANISM KIT
IR 2235-THK1
IR 2235-THK1
Hammer Mechanism Kit for Ingersoll Rand 2235 Series Impact Wrench
Includes: Hammer frame, Hammer (2), Hammer pinProduct Application and Uses: Tool Boot for 2235 Series impact wrenches
For Use With
- 2235QPTIMAX
- 2235TIMAX-2
- 2235QTIMAX
- 2235QTIMAX-G
- 2235TIMAX-G
- 2235TIMAX
- 2235QTIMAX-2
- 2235TIMAX-R
- 2235PTIMAX
$120.00
SILENCER
IR 341SR-311
IR 341SR-311
Silencer for Ingersoll Rand 341 Series, 441 Series Air Percussive Tamper
$19.00
REGULATOR ASSEMBLY
IR 4151-A165
IR 4151-A165
Regulator Assembly for Ingersoll Rand 4151 Orbital Sander
$15.00
Digger
IR 95LA1
IR 95LA1
Digger, 7/8 x 3-1/4" Hex Shank, 1850 BPM, 4" Stroke Length, 1.69" Bore
The 95 Series diggers are meant for heavy duty work, from foundation work, to piping, to break demolition. With a 4 inch piston stroke, and a steel cone, these diggers will not let you down.Features And Benefits
- Weight: With a die cast aluminum handle and housing, the 95 Series is as lightweight (weighing 28 lbs.) as it is powerful, making hard work easy.
- Durability: Built with premium materials, the 95 Series can withstand harsh conditions and repeated drops without affecting its performance.
- Reliability: The 95 Series is equipped with rubber buffer retainers to absorb shock and prolong the life of your tool.
Product Application and Uses: Foundation work, piping, break demolition
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Consumption @ Load (cfm): 47
Air Consumption @ Load (l/min): 1331
Air Inlet: 3/8" NPT
Air Pressure (psi): 90
Blows per Min: 1850
Bore Diameter (in): 1.69
Collar Type: Round
Color: Beige
Configuration/Handle Type: D-Handle
Duty Rating: Industrial Duty
Exhaust Location: Side
Housing Material: Aluminum
Max Pressure (bar): 6.2
Min Hose Size (in): 1/2
Power Source: Air Powered
Product Length (in): 21.88
Product Weight (lb): 28
Retainer Type: Latch
Shank SIze (in): 7/8 x 3-1/4
Shank Type: Hex
Stroke Length (in): 4
Vibration Level (m/s2): 29.5 / 6.6
Warranty: 1-year
Similar IR
- 95A1
- 95LA3
- 93A1
- 93A4
- 93LA1
$2,220.00
HOLDER
IR NS11-21
IR NS11-21
Holder for Ingersoll Rand 172LNA1, 182LNA1, 172L, 182G, 182L Scaler
$90.00
