INGERSOLL-RAND IR TOOL S12880
Chain bucket textile S for ELK100. up to 20 m Chain
IR 9515.3109.3
Chain bucket textile S for ELK100. up to 20 m Chain
Stone, Die Grind (Mpq=1) Multiple Of 6
IR 9800
5-Piece Die Grinder Stone, 1/4" Collet for Ingersoll Rand Die Grinder
- Arbor/Collet: 1/4"
- For Use With: 3101G
- For Use With: 3107G
Balancer, 66-77 Lbs
IR BHD-35
Heavy Duty Spring Balancer, 66-77 lb Capacity, 6.5' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Locking device to block the load at any height
- Upper rotary suspension with safety hook
- Adjustable stroke limiting device
- Cable Material: Stainless steel
- Capacity (lb): 66 - 77
- Color: Red
- Duty Rating: Heavy Duty
- Housing Material: Aluminum
- Lift (ft): 6.5
- Lock Mechanism: Non-Locking
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 9.8
- Product Height (in): 24
- Product Weight (lb): 26
- Reel Height (in): 25.47
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Balancer
IR BSD-150
Super Duty Spring Balancer, 287-330 lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Visible cable for inspection
- Cable Material: Stainless steel
- Capacity (lb): 287 - 330
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 98.1
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Warranty: 1-year
Balancer
IR BSD-100
Super Duty Spring Balancer, 198-220lb Capacity, 8.2' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Gravity-free suspension capability
- Ribbed and sealed monobloc construction in aluminum alloy
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Locking device to block the load at any height
- Adjustable stroke limiting device
- Visible cable for inspection
- Cable Material: Stainless steel
- Capacity (lb): 198 - 220
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 8.2
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 78.5
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Warranty: 1-year
Tool Balancer, 8.8-13.2 Lb Cap, 8.2 Ft Lift
IR BMDL-6
Tool Balancer, 8.8-13.2 Lb Cap, 8.2 Ft Lift
Boot, Protective Battery
IR BL2010-BOOT
Protective Boot for Ingersoll Rand BL2010 & BL2022 IQV Battery
Description: Ingersoll Rand's tool boots absorb vibrations and protect the tool from external damage.
Features And Benefits:
- Protects surrounding surfaces from scratches, nicks ect.
- Protects tool from damage if dropped.
- Adds further protection from unwanted contaminates that can affect tool performance.
Product Application and Uses:
For use with Ingersoll Rand BL2010 & BL2022
- Color: Red
- Housing Material: Thermoplastic Polymer
- For Use With: BL2022
- For Use With: BL2022-AP5
- For Use With: BL4011
- For Use With: G4911-K1
- For Use With: G4911-K1-AP
- For Use With: G4911-K1-CN
- For Use With: G4911-K1-EU
- For Use With: G4911-K1-IN
- For Use With: G4911-K1-JP
- For Use With: G4911-K1-KR
- For Use With: W7152
- For Use With: W7153
- For Use With: W7153-AP
- For Use With: W7153-K22
- For Use With: W7153-K22-CN
- For Use With: W7153-K22-IN
- For Use With: W7153-K22-JP
- For Use With: W7153-K22-KR
- For Use With: W7153-K22-SGHK
- For Use With: W7153-K22B-AN
- For Use With: W7153-K22B-EU
- For Use With: W7253-TL
- For Use With: W8171-K2
Balancer
IR BSDL-50
Super Duty Long Spring Balancer, 99-110 lb Capacity, 9.85' Lift
Description: B Series spring balancers are designed to increase productivity in any situation where repetitive or prompt vertical movement of fixed load is required. They compensate weight of your power tools or other manufacturing equipment and enable operator to lift or lower it with minimal effort. Experience the effect of tool float with our spring balancers. This "gravity-free" effect on all B Series models allows users to move tools with minimal effort along cable travel.
Features And Benefits:
- Stainless steel cable and anti-friction cable guide
- Safety device against load dropping due to the spring breakage (>6.5 lb)
- Upper rotary suspension with safety hook
- Precision-guided cable-winding prevents jamming
- Manual locking device for instant clamping or release
- Worm screw capacity adjustment
- Alignable rotating upper hook
- Cable replacement without balancer disassembly
- Cable visible for inspection
- Cable Material: Stainless steel
- Capacity (lb): 99-110
- Color: Red
- Duty Rating: Super Duty
- Housing Material: Aluminum
- Lift (ft): 9.85
- Lock Mechanism: Ratchet
- Lower Hook: Spring Loaded Safety Hook
- Product Length (in): 8.7
- Product Width (in): 12
- Product Height (in): 27.6
- Product Weight (lb): 52.7
- Reel Height (in): 27.95
- Reel Mount Type: Spring Loaded Safety Hook
- Rotation Type: Swiveling
- Tension Adjustment: Worm Screw
- Warranty: 1-year
Switch-Led-Pcb-Battery Connector Module
IR D1000-K93
Switch-Led-Pcb-Battery Connector Module
1/2in IQV20 HAMMER DRILL
IR D5241
1/2 inch 20V Cordless Hammer Drill Bare Tool, 1100 in-lb Torque, Keyless Chuck, Pistol Grip
Description: The Ingersoll Rand D5241 IQV20 Hammer Drill combines the ease and versatility of a cordless tool with the power and precision of our best-in-class, professional-grade portfolio. With 3 drill settings, 2 speed settings, a 1/2 -inch chuck, and a 24-position clutch, it's designed to give you the precise torque you need, whether you're drilling through a thin layer of plaster or a solid cement wall. Also available in the D5241-K22 kit which includes the D5241 Hammer Drill, Auxiliary Handle, (2) BL2022 5.0Ah Batteries, and 20V Battery Charger.
Features And Benefits:
- Power: With the capacity of 1,100 in-lbs of torque, the D5241 IQV20 Hammer Drill is designed with the pros in mind.
- 1/2 inch Chuck: All-metal keyless chuck with carbide teeth ensure bits don't slip when drilling through almost any material.
- 24-Position Clutch: Say goodbye to cam-outs and over-torqued fasteners. A 24 position clutch lets you fine-tune fastening depth, so you can work smarter, not harder.
- Brushless Motor: The combination of a powerful brushless motor means the D5241 IQV20 Hammer Drill operates at the apex of performance in almost any application.
- High and Low Speed Options: Whether you're drilling through wood, steel, or concrete, two speed options help you get the right level of torque, every time.
- Rubberized Design: The D5241 IQV20 Hammer Drill's impact-resistant rubberized design helps reduce kickback, keeping you steady and safe.
- LED light: An LED light located at the bottom of the tool reduces shadows so you can see your work area clearly.
- Adjustable Auxiliary Handle: For high-torque applications, a removable ergonomic auxiliary arm helps keep you steady.
- IQV20 Battery: Compatible with the entire Ingersoll Rand IQV20 platform, giving it an extra dose of power without weighing it down.
- Also available in the D5241-K22 kit which includes the D5241 Hammer Drill, Auxiliary Handle, (2) BL2022 5.0Ah Batteries, and 20V Battery Charger.
- Includes: D5241 1/2 inch Hammer Drill, Auxiliary Handle and Manuals. Bare tool only, batteries and charger sold separately or with other kits.
- Actuation/Throttle Type/Switch Type: Trigger
- Blows per Min: 28000
- Built-in Light: Yes
- Chuck Capacity/Bit Capacity (in): 1/2
- Chuck Type: Keyless Chuck
- Clutch Settings: 24
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Configuration/Handle Type: Auxiliary Handle
- Drilling Capacity in Concrete: 3/8 inch (10mm)
- Forward Torque setting 1 (ft-lb): 60
- Forward Torque setting 1 (in-lb): 717
- Forward Torque setting 1 (nm): 81
- Housing Material: Impact and chemical-resistant composite housing
- Max Free Speed (rpm): 1800
- Max Torque (ft-lb): 92
- Max Torque (in-lb): 1106
- Max Torque (nm): 125
- Motor: Brushless Motor
- Nominal Drilling Capabilities (Wood Med or Frp): 1-3/8 inch (35mm)
- Number of Batteries Required: 1
- Power Source: Battery Powered
- Product Length (in): 7.8
- Product Width (in): 3.1
- Product Height (in): 8.7
- Product Height (in) (with Battery): 11
- Product Weight (lb): 3.5
- Product Weight (lb) (with Battery): 5
- Reversible: Reversible
- RPM Setting 1: 500
- Side to Center Distance (in): 1.6
- Side to Center Distance (mm): 41
- Sound Pressure/Power Db(A): 84 / 92
- Standards/Cer
4.5/5in IQV20 Angle Grinder, 2 Battery Kit
IR G4621-K22
20V Cordless Polisher/Sander 2 Battery Kit, 8300 RPM, 2" & 3" Pad
Description: Say goodbye to stall-outs, and say hello to power that lasts all shift long. The IQV20 Cordless Polisher/Sander comes equipped with a powerful brushless motor, compact form, and powerful battery platform that helps you tackle any task in record time. Plus, lightweight, ergonomic features designed with technicians in mind help keep operator fatigue at bay. So, whether you're sanding down sheet metal or giving a headlight one last polish, you'll be covered. Kit includes 6 polishing and sanding accessories (2" & 3" Roloc Pads, 3" Hook & Loop Backing Pad, 3" Wool, 3" Soft Foam, 3" Medium Foam Pads), (2) BL2012 2.5Ah Batteries, and 20V Battery Charger.
Features And Benefits:
- Performance: A high-power brushless motor provides extended runtime and reliability, so you can leave stall-outs and overheated equipment in the dust.
- Durability: A threaded, all-metal chuck and spindle lock keep accessories in place during tough jobs and make abrasive changes quick. IPX6 rated protection against harmful effects of water ingress.
- Ergonomics: Small size to easily reach spots where large sanders (DA/Orbital) cannot.
- Visibility: An LED light located at the foot of the tool helps reduce shadows so you can see your work area clearly.
- Flexibility: An adjustable auxiliary handle keeps you steady in any configuration.
- Reliability: Efficient, high-performance brushless motor provides extended runtime and long-term reliability.
- Compatibility: Compatible with the entire Ingersoll Rand IQV20 platform, giving it an extra dose of power without weighing it down.
- Kit Includes: G4621 Polisher/Sander, 2" & 3" Roloc Pads, 3" Hook & Loop Backing Pad, 3" Wool Pad, 3" Soft Foam Pad, 3" Medium Foam Pad, Auxiliary Handle, (2) BL2012 2.5Ah Batteries, and 20V Battery Charger.
Product Application and Uses:
Gasket removal or cleaning corrosion and dirt off parts similar to right angle die grinders, Small size to easily reach spots where larger polisher/sanders (ex. DA/Orbital sanders) cannot reach.
- Includes: G4621 Polisher/Sander Tool, 2" & 3" Roloc Backing Pads, 3" Hook & Loop Backing Pad, 3" Wool, 3" Soft Foam Pad, 3" Medium Foam Pad, Auxiliary Handle, (2) BL2012 20V 2.5Ah Batteries, 20V Battery Charger, 110/120V Power Cord
- Actuation/Throttle Type/Switch Type: Trigger
- Anti-Restart Technology: No
- Anti-Vibration Technology: No
- Arbor/Collet: 5/16" -24 Thread
- Color: Grey
- Configuration/Handle Type: Pistol Grip
- Configuration/Handle Type: Auxiliary Handle
- Duty Rating: Maintenance Duty
- Gear Train: Planetary
- Gripping Length (in): 4
- Handle Material: Overmolded Grip
- Height Over Spindle (in): 1.06
- Housing Material: Nylon
- Lock Mechanism: Toggle Switch
- Max Free Speed (rpm): 8300
- Mounting Type: Arbor
- Pad Diameter or Size (in): 2 & 3
- Pad Face: Hook & Loop
- Pad Face: Roloc
- Power Source: Battery Powered
- Product Length (in): 4.92
- Product Width (in): 3.19
- Product Height (in): 8.26
- Product Height (in) (with Battery): 9.25
- Product Weight (lb): 1.7
- Product Weight (lb) (with Battery): 2.61
- Sound Pressure/Power Db(A): 73 / 84
- Speed Setting: Dual speed
- Standards/Certifications: UL, IPX6 (protection against harmful effects of water ingress)
- Tether Style: Not Tether Capable
- Vacuum: None
- Vibration Level (m/s2): 1.2
4.5/5" IQV20 ANGLE GRINDER
IR G5351
20V Cordless Angle Grinder/Cut-off Tool, 8000 RPM, 1HP, 4.5" Wheel, Bare tool
Description: Break free from the cord with the G5351 20V Cordless 4.5/5.0" Angle Grinder & Cut-Off Tool that brings the power of a corded tool with the mobility of a cordless. Slim and well-balanced, G5351 allows access to tight spaces and weighs 20% less than leading competitor. Tool features an extended paddle switch and unique inline battery design that eliminates interference from the forearm during use. The G5351 couples a high-performance Brushless Motor with advanced features like Anti-Kickback and overload protection for safe, reliable performance. Slim handle with rubberized grip makes the G5351 Cordless Grinder comfortable to use for long periods. Tool-free guard attachment and Spindle-lock button allow quick, easy accessory changes. Also available in the G5351-K22 kit which includes (2) 20V 5Ah batteries, and a charger.
Features And Benefits:
- 1.0 HP brushless motor delivers up to 8,000 RPM and makes short work of material removal on a variety of surfaces.
- The G5351 is a lightweight and compact tool weighing 5 lbs. (including battery) and 13.25" length, improving control and access to tight spaces.
- Extended paddle switch with lock-off lever prevents accidental triggering and provides a more comfortable grip when maneuvering.
- Spindle-lock design with simple button press to disengage. Spindle can be used with all 5/8"-11 and 4.5"-5.0" wheels.
- Automatic anti-kickback protection and overload protection with E-brake.
- Change guards with tool-free quick release, use with included grinding guard for material removal and surfacing, or with the included cut-off guard for fast metal cutting.
- Slim body and comfortable rubber grip provide more tool control and reduce fatigue during extended use.
- Included side-handle attaches on the left or right side
- Compatible with IQV 20 Series Battery System.
Product Application and Uses:
Material Removal, Surface Preparation, Blade Sharpening, Metal Cutting. Removes material from a variety of sources including wood, steel, aluminum, ceramic, glass, concrete and stone. Optimized for industrial and automotive applications.
- Includes: G5351 Grinder, Type 1 (Cutting) Guard, Type 27 (Grinding) Guard, Handle, flange, nut, Spanner Wrench, Manuals. Bare tool only, batteries and charger sold separately or with other kits.
- Actuation/Throttle Type/Switch Location: Bottom
- Actuation/Throttle Type/Switch Type: Paddle Switch
- Anti-Restart Technology: Yes
- Anti-Vibration Technology: No
- Arbor/Collet: 5/8" -11 Thread
- Brake Type: Electronic
- Clutch Type: Electronic Anti-Kickback Clutch
- Color: Grey
- Configuration/Handle Type: Right Angle
- Configuration/Handle Type: Auxiliary Handle
- Duty Rating: Medium Duty
- Exhaust Location: Front
- Grinder Type: Angle Grinder
- Guard Material: Steel
- Handle Material: TPE Composite
- Head Style: Standard Head
- Height Over Spindle (in): 3.11
- Housing Material: Impact and chemical-resistant composite housing
- Lock Mechanism: Lever lock in off position
- Max Free Speed (rpm): 8000
- Motor: Brushless Motor
- Power Source: Battery Powered
- Product Length (in): 13.25
- Product Width (in): 3.11
- Product Height (in): 4.4
- Product Weight (lb): 3.5
- Rated Power (hp): 1
- Rated Power (kW): 0.75
- Right Angle Length (in): 13.25
- Right Angle Length (mm): 337
- S
Blank - 12" .58 Hx Shk Ov Col, Qty 5
IR HH1-214-12
12" Chipping Hammer Blank Steel, Hex Shank Oval Collar
Description: Ingersoll Rand offers a complete line of construction tool steels and accessories for countless applications. Our construction heritage dates back to 1871 with the invention of the world's first rockdrill. Drawing on our long and successful history in the construction industry, we use top-grade materials to manufacture a line of tough, durable products that are versatile enough to be used in virtually every tool brand. Suitable for a wide range of applications, our chipping hammer steels are available with round or hex shanks and oval or round collars.
Product Application and Uses:
Designed for making customized points. For use with Ingersoll Rand K2LA1, 2DA1SA, 3DA1SA, 4DA1SA, 1A1SA, 2A1SA, 3A1SA, 4A1SA chipping hammers.
- Includes: (5) Blank Steels
- Chisel Style: Blank
- Collar Thickness (in): 0.813
- Collar Type: Oval
- Collar Width (in): 1.125
- Housing Material: Steel
- Length Under Collar (in): 9.625
- Product Length (in): 12
- Product Weight (lb): 1.75
- Shank Length (in): 2.375
- Shank SIze (in): 0.58
- Shank Type: Hex
- For Use With: 1A1SA
- For Use With: 2A1SA
- For Use With: 2DA1SA
- For Use With: 3A1SA
- For Use With: 3DA1SA
- For Use With: 4A1SA
- For Use With: 4DA1SA
Payment options
