Airpower | INGERSOLL-RAND IR TOOL S12880 branded products

QX Zigbee and Bluetooth, Display, 20V Angle 18 NM Standard Square 3/8in

IR QXXD2AT018PS06

3/8" 20V Cordless QX Precision Fastening Angle Screwdriver, 159 in-lb Torque, 500 RPM, Display

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: No
Color: Grey
Configuration/Handle Type: Right Angle
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 500
Max Torque (ft-lb): 13
Max Torque (in-lb): 159
Max Torque (nm): 18
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 24.34
Product Height (in) (with Battery): 3.94
Product Weight (lb): 2.8
Recommended Forward Torque Range (ft-lb): 2.7-13
Recommended Forward Torque Range (in-lb): 32-159
Recommended Forward Torque Range (nm): 3.6-18
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 0.51
Side to Center Distance (mm): 13
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

Backcap Assembly, 20V Angle, 802.15.4 and Bluetooth, Display, Standard

IR QXXD2AT000P000

Backcap Assembly, 20V Angle, 802.15.4 and Bluetooth, Display, Standard

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Angle 27NM ETS Square 3/8in

IR QXXD2AT027ES06

3/8" 20V Cordless QX Precision Fastening ETS Angle Wrench, 239 in-lb Torque, 330 RPM, Display

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: No
Color: Grey
Configuration/Handle Type: Right Angle-ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 330
Max Torque (ft-lb): 20
Max Torque (in-lb): 239
Max Torque (nm): 27
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 21.73
Product Height (in) (with Battery): 3.94
Product Weight (lb): 3.7
Recommended Forward Torque Range (ft-lb): 4.0-20
Recommended Forward Torque Range (in-lb): 48-239
Recommended Forward Torque Range (nm): 5.4-27
Retainer Type: Pin Detent
Reversible: Reversible
Side

Call for pricing

Backcap Assembly, 20V Pistol, 802.15.4 and Bluetooth, Display, ETS

IR QXXD2PT000E000

Backcap Assembly, 20V Pistol, 802.15.4 and Bluetooth, Display, ETS

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 4 NM STANDARD SQUARE 1/4 INCH

IR QXXD2PT004PS04

1/4" 20V Cordless QX Precision Fastening Screwdriver, 35 in-lb Torque, 1500 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Square
Max Free Speed (rpm): 1500
Max Torque (ft-lb): 3.0
Max Torque (in-lb): 35
Max Torque (nm): 4
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.2
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 0.6-3.0
Recommended Forward Torque Range (in-lb): 7.1-35
Recommended Forward Torque Range (nm): 0.8-4
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Vibration Level (m/s2): < 2.5
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V ANGLE 18 NM STANDARD QUICK CONNECT 1/4 INCH

IR QXXD2AT018PQ04

1/4" Hex 20V Cordless QX Precision Fastening Angle Screwdriver, 159 in-lb Torque, 500 RPM, Display

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: No
Color: Grey
Configuration/Handle Type: Right Angle
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 500
Max Torque (ft-lb): 13
Max Torque (in-lb): 159
Max Torque (nm): 18
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 24.34
Product Height (in) (with Battery): 3.94
Product Weight (lb): 2.8
Recommended Forward Torque Range (ft-lb): 2.7-13
Recommended Forward Torque Range (in-lb): 32-159
Recommended Forward Torque Range (nm): 3.6-18
Retainer Type: Quick Change
Reversible: Reversible
Side to Center Distance (in): 0.51
Side to Center Distance (mm): 13
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 8 NM ETS QUICK CONNECT 1/4 INCH

IR QXXD2PT008EQ04

1/4" Hex 20V Cordless QX Precision Fastening ETS Screwdriver, 70 in-lb Torque, 1150 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol – ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 1150
Max Torque (ft-lb): 5.9
Max Torque (in-lb): 71
Max Torque (nm): 8
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.13
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.2-5.9
Recommended Forward Torque Range (in-lb): 14-71
Recommended Forward Torque Range (nm): 1.6-8
Retainer Type: Quick Change
Reversible: Reversible

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 4 NM STANDARD SQUARE 3/8 INCH

IR QXXD2PT004PS06

3/8" 20V Cordless QX Precision Fastening Screwdriver, 35 in-lb Torque, 1500 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 1500
Max Torque (ft-lb): 3.0
Max Torque (in-lb): 35
Max Torque (nm): 4
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.35
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 0.6-3.0
Recommended Forward Torque Range (in-lb): 7.1-35
Recommended Forward Torque Range (nm): 0.8-4
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Vibration Level (m/s2): < 2.5
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V ANGLE 27 NM STANDARD SQUARE 3/8 INCH

IR QXXD2AT027PS06

3/8" 20V Cordless QX Precision Fastening Angle Screwdriver, 239 in-lb Torque, 330 RPM, Display

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: No
Color: Grey
Configuration/Handle Type: Right Angle
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 330
Max Torque (ft-lb): 20
Max Torque (in-lb): 239
Max Torque (nm): 27
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 21.73
Product Weight (lb): 3.7
Recommended Forward Torque Range (ft-lb): 4.0-20
Recommended Forward Torque Range (in-lb): 48-239
Recommended Forward Torque Range (nm): 5.4-27
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 0.67
Side to Center Distance (mm): 17
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V ANGLE 5 NM STANDARD QUICK CONNECT 1/4 INCH

IR QXXD2AT005PQ04

1/4" Hex 20V Cordless QX Precision Fastening Angle Screwdriver, 44 in-lb Torque, 1213 RPM, Display

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: No
Color: Grey
Configuration/Handle Type: Right Angle
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 1213
Max Torque (ft-lb): 3.7
Max Torque (in-lb): 44
Max Torque (nm): 5
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 21.73
Product Height (in) (with Battery): 3.94
Product Weight (lb): 2.5
Recommended Forward Torque Range (ft-lb): 0.7-3.7
Recommended Forward Torque Range (in-lb): 8.9-44
Recommended Forward Torque Range (nm): 1.0-5
Retainer Type: Quick Change
Reversible: Reversible
Side to Center Distance (in): 0.36
Side to Center Distance (mm): 9
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 8 NM STANDARD SQUARE 3/8 INCH

IR QXXD2PT008PS06

3/8" 20V Cordless QX Precision Fastening Screwdriver, 70 in-lb Torque, 1150 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 1150
Max Torque (ft-lb): 5.9
Max Torque (in-lb): 71
Max Torque (nm): 8
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.35
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.2-5.9
Recommended Forward Torque Range (in-lb): 14-71
Recommended Forward Torque Range (nm): 1.6-8
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 8 NM STANDARD SQUARE 1/4 INCH

IR QXXD2PT008PS04

1/4" 20V Cordless QX Precision Fastening Screwdriver, 70 in-lb Torque, 1150 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Square
Max Free Speed (rpm): 1150
Max Torque (ft-lb): 5.9
Max Torque (in-lb): 71
Max Torque (nm): 8
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.2
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.2-5.9
Recommended Forward Torque Range (in-lb): 14-71
Recommended Forward Torque Range (nm): 1.6-8
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX Zigbeee and Bluetooth, Display, 20V Pistol 8NM Standard Quick Connect 1/4in

IR QXXD2PT008PQ04

1/4" Hex 20V Cordless QX Precision Fastening Screwdriver, 70 in-lb Torque, 1150 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 1150
Max Torque (ft-lb): 5.9
Max Torque (in-lb): 71
Max Torque (nm): 8
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.48
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.2-5.9
Recommended Forward Torque Range (in-lb): 14-71
Recommended Forward Torque Range (nm): 1.6-8
Retainer Type: Quick Change
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Pistol 12NM ETS Quick Connect 1/4in

IR QXXD2PT012EQ04

1/4" Hex 20V Cordless QX Precision Fastening ETS Screwdriver, 106 in-lb Torque, 750 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol – ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 750
Max Torque (ft-lb): 8.9
Max Torque (in-lb): 106
Max Torque (nm): 12
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.13
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.8-8.9
Recommended Forward Torque Range (in-lb): 21-106
Recommended Forward Torque Range (nm): 2.4-12
Retainer Type: Quick Change
Reversible: Reversible

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 12 NM ETS SQUARE 3/8 INCH

IR QXXD2PT012ES06

3/8" 20V Cordless QX Precision Fastening ETS Screwdriver, 106 in-lb Torque, 750 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol – ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 750
Max Torque (ft-lb): 8.9
Max Torque (in-lb): 106
Max Torque (nm): 12
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 7.99
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.8-8.9
Recommended Forward Torque Range (in-lb): 21-106
Recommended Forward Torque Range (nm): 2.4-12
Retainer Type: Pin Detent
Reversible: Reversible

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Pistol 12NM Standard Quick Connect 1/4in

IR QXXD2PT012PQ04

1/4" Hex 20V Cordless QX Precision Fastening Screwdriver, 106 in-lb Torque, 750 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 750
Max Torque (ft-lb): 8.9
Max Torque (in-lb): 106
Max Torque (nm): 12
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.48
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.8-8.9
Recommended Forward Torque Range (in-lb): 21-106
Recommended Forward Torque Range (nm): 2.4-12
Retainer Type: Quick Change
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 12 NM STANDARD SQUARE 1/4 INCH

IR QXXD2PT012PS04

1/4" 20V Cordless QX Precision Fastening Screwdriver, 106 in-lb Torque, 750 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Square
Max Free Speed (rpm): 750
Max Torque (ft-lb): 8.9
Max Torque (in-lb): 106
Max Torque (nm): 12
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.2
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.8-8.9
Recommended Forward Torque Range (in-lb): 21-106
Recommended Forward Torque Range (nm): 2.4-12
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX ZIGBEE AND BLUETOOTH, DISPLAY, 20V PISTOL 12 NM STANDARD SQUARE 3/8 INCH

IR QXXD2PT012PS06

3/8" 20V Cordless QX Precision Fastening Screwdriver, 106 in-lb Torque, 750 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 750
Max Torque (ft-lb): 8.9
Max Torque (in-lb): 106
Max Torque (nm): 12
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.35
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 1.8-8.9
Recommended Forward Torque Range (in-lb): 21-106
Recommended Forward Torque Range (nm): 2.4-12
Retainer Type: Pin Detent
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
Sound Pressure/Power Db(A): < 70.0
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Pistol 18NM ETS Quick Connect 1/4in

IR QXXD2PT018EQ04

1/4" Hex 20V Cordless QX Precision Fastening ETS Screwdriver, 159 in-lb Torque, 500 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol – ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 500
Max Torque (ft-lb): 13
Max Torque (in-lb): 159
Max Torque (nm): 18
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.13
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 2.7-13
Recommended Forward Torque Range (in-lb): 32-159
Recommended Forward Torque Range (nm): 3.6-18
Retainer Type: Quick Change
Reversible: Reversible

Call for pricing

QX KIT, 802.15.4 AND BLUETOOTH, DISPLAY, 20V PISTOL 1000NM 3/4" SQ, NORTH AMERICA

IR QXXD2PT10CPM12-K2

3/4" 20V Cordless Torque Wrench 2 Battery Kit, Bluetooth/802.15.4, Pistol

Includes: (2) 20V 5Ah BL2022 Batteries, 20V Battery Charger
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Heavy Duty
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Max Free Speed (rpm): 7
Max Torque (ft-lb): 738
Max Torque (in-lb): 8851
Max Torque (nm): 1000
Motor: Brushless Motor
Power Source: Battery Powered
Reaction Bar: Yes
Retainer Type: Thru-hole
Reversible: Reversible
Tether Style: Tether Included
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4

Call for pricing

QX, 802.15.4 AND BLUETOOTH, DISPLAY, 20V PISTOL 200NM 3/4" SQ

IR QXXD2PT200PM12

3/4" 20V Cordless Torque Wrench, 17701 in-lb, Bare Tool, Bluetooth/802.15.4, Pistol

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Heavy Duty
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Max Free Speed (rpm): 39
Max Torque (ft-lb): 148
Max Torque (in-lb): 1770
Max Torque (nm): 200
Motor: Brushless Motor
Power Source: Battery Powered
Reaction Bar: Yes
Recommended Forward Torque Range (ft-lb): 30-148
Recommended Forward Torque Range (in-lb): 354-1770
Recommended Forward Torque Range (nm): 40-200
Retainer Type: Thru-hole
Reversible: Reversible
Tether Style: Tether Included
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Pistol 18NM ETS Square 3/8in

IR QXXD2PT018ES06

3/8" 20V Cordless QX Precision Fastening ETS Screwdriver, 159 in-lb Torque, 500 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. Control and ergonomics, not compromise – that is what the QX ETS is all about. The QX ETS offers all the capabilities found in the QX Series™ platform, without the torque reaction.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Standard QX Direct Drive Mode: when disabling the ETS* Mode, these tools can be used as a QX standard drive mode.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key
Ergonomically enhanced motor control algorithm significantly reduces the average force experienced by the operator during the tightening process
Red tool highlights provide a clear indication of ETS* tool identity vs standard QX tool
Continuously blue light above the keypad provides operator assurance that ETS* is ACTIVE
In addition to the standard direct drive mode, each tool configuration can be independently programmed to utilize one of the three available ETS* modes (Ergonomic Mode, Performance Mode, Productivity Mode), simplifying setup.
Ergonomic Mode: with the lowest energy pulses, is ideal for hard joints or when arm, wrist, or tool angles are most difficult.
Performance Mode: with medium energy pulses, is the best all-purpose mode.
Productivity Mode: with the highest energy pulses, is the fastest mode. Ideal for soft joints or when high production rates are required.

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol – ETS (ergonomic tightening system)
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/8
Drive Type: Square
Max Free Speed (rpm): 500
Max Torque (ft-lb): 13
Max Torque (in-lb): 159
Max Torque (nm): 18
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 7.99
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 2.7-13
Recommended Forward Torque Range (in-lb): 32-159
Recommended Forward Torque Range (nm): 3.6-18
Retainer Type: Pin Detent
Reversible: Reversible
S

Call for pricing

QX Zigbee and Bluetooth, Display, 20V Pistol 18NM Standard Quick Connect 1/4in

IR QXXD2PT018PQ04

1/4" Hex 20V Cordless QX Precision Fastening Screwdriver, 159 in-lb Torque, 500 RPM, Display, Pistol

A member of the QX Connect Series Precision Fastening System, the 20V QXXD Cordless Precision Screwdriver offer the full feature set of the QX Connect Series. With up to 32 programmable configurations, wireless data transmission and on tool display, Bluetooth connectivity, this tool is designed to improve accuracy and productivity of your precision fastening and assembly operations. Reducing torque reaction doesn’t have to be complicated with the QX Connect Series Ergonomic Tightening System. The Bluetooth capability further enhances mobility by enabling users to wirelessly program the QX Connect Series assembly tools using the INSIGHT Connect App.

Features And Benefits

Now Comes with 32 programmable tightening configuration.
Bluetooth further adds mobility to enable Wireless programming using the INSIGHT Connect app.
Enhanced quantitative feedback – displaying the actual measured torque or angle result.
1,200 cycles of onboard tightening data storage.
Configurable preventative maintenance alarms.
Intuitive qualitative feedback using Green, Red, and Yellow indicators.
All QX Series™ IQV20 tools are compatible with both the BL2022 and BL2012 batteries. The BL2022 is optimum for longer use applications while the BL2012 is ideal for tighter spaces and reduced weight. The 20 volt batteries utilize our 20V battery charger.
Offer option for Insight Connect Android APP LINK
Optional ergonomic tightening system to reduce torque reaction experienced by operator.
Multiple Programming Methods: Wirelessly Through INSIGHTqcx Controller, Insight Connect Android and IOS App; Through USB with INSIGHTqcx Controller, Insight Connect Android App and ICS Software; Through On Board Tool Display/ Key

Includes: Bare tool only; batteries and charger sold separately.
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 1/4
Drive Type: Hex
Max Free Speed (rpm): 500
Max Torque (ft-lb): 13
Max Torque (in-lb): 159
Max Torque (nm): 18
Motor: Brushless Motor
Power Source: Battery Powered
Product Length (in): 8.48
Product Height (in) (with Battery): 10.07
Product Weight (lb): 2
Recommended Forward Torque Range (ft-lb): 2.7-13
Recommended Forward Torque Range (in-lb): 32-159
Recommended Forward Torque Range (nm): 3.6-18
Retainer Type: Quick Change
Reversible: Reversible
Side to Center Distance (in): 1
Side to Center Distance (mm): 25
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4
Wireless Tool Tracking: USB-C

Call for pricing

QX KIT, 802.15.4 AND BLUETOOTH, DISPLAY, 20V PISTOL 500NM 3/4" SQ, NORTH AMERICA

IR QXXD2PT500PM12-K2

3/4" 20V Cordless Torque Wrench 2 Battery Kit, Bluetooth/802.15.4, Pistol

Includes: (2) 20V 5Ah BL2022 Batteries, 20V Battery Charger
Actuation/Throttle Type/Switch Type: Trigger
Anvil Length: Standard
Built-in Light: Yes
Color: Grey
Configuration/Handle Type: Pistol Grip
Data Storage Capacity: 1200 cycles
Drive Size (in): 3/4
Drive Type: Square
Duty Rating: Heavy Duty
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Max Free Speed (rpm): 13
Max Torque (ft-lb): 369
Max Torque (in-lb): 4425
Max Torque (nm): 500
Motor: Brushless Motor
Power Source: Battery Powered
Reaction Bar: Yes
Retainer Type: Thru-hole
Reversible: Reversible
Tether Style: Tether Included
User Interface: Display
Voltage DC: 20
Warranty: 1-year Tool, 2-year Battery, 3-year Charger
Wireless Tool Tracking: Bluetooth
Wireless Tool Tracking: 802.15.4

Call for pricing

Anvil Kit, Hog Ring/Thru Hole 1/2" Square

IR TK-RTS-626-H8

Anvil Kit, Hog Ring/Thru Hole 1/2" Square

Call for pricing

Motor Controller Board, 40 V

IR TA-VA2T-499-1

Motor Controller Board, 40 V

Call for pricing

Motor Assembly

IR TA-VP1-054

Motor Assembly

Call for pricing

Gear Housing Assembly

IR TA-VP1B-40

Gear Housing Assembly

Call for pricing

Display Protector Kit

IR TK-RTS-441

Display Protector Kit

Call for pricing

Communication and Display Assembly Kit

IR TK-RTS-499-2

Communication and Display Assembly KitT

Call for pricing

Trigger Board Kit

IR TK-RTS-499-5

Trigger Board Kit

Call for pricing

CARBON FIBER ARTICULATING TORQUE ARM, 19 NM MAX TORQUE, 740MM REACH, BENCH MOUNT

IR TA19B

Articulating Torque Arm, 19Nm Max Torque, 29in Reach, Bench Mount

Features And Benefits

Spring balancer adjusts easily and offers effortless vertical movement.
Simple, proven design for easy setup and dependability.
Multiple Torque Options: Available in multiple torque capacities: 2 Nm, 7 Nm, and 19 Nm, to suit a wide range of fastening applications.
Extended Reach: Arm reach options of 500mm, 700mm, and 740mm provide flexibility for various workstation layouts.
Lightweight Carbon Fiber Construction: Select models (TA02B and TA07B) feature carbon fiber arms for reduced operator fatigue and enhanced maneuverability.
Bench Mount Design: All models are bench-mounted, ensuring stability and consistent torque reaction performance.
Compact and Ergonomic: Designed for minimal workspace intrusion while maximizing operator comfort and efficiency.

Product Application and Uses: For use with Ingersoll Rand IQI and QE2 Series Precision Fastening Screwdrivers.
Capacity (lb): 11
Max Torque (ft-lb): 14
Max Torque (in-lb): 168
Max Torque (nm): 19

For Use With

IQI4LT1500TQ4
IQI2LT0250TQ4
IQI2LC0250TQ4
IQI4LT0500TQ4
IQI4LC1000PQ4
IQI4LC1500TQ4
IQI2LC0050TQ4
IQI2LC0200TQ4
IQI4LC1000TQ4
IQI2LT0017PM4
IQI4LC0500TQ4
IQI2LC0017PQ4
IQI2LC0200PQ4
IQI4LT0500PQ4
IQI2LC0100TQ4
IQI2LT0017PQ4
IQI2LT0250PQ4
IQI2LC0017PM4
IQI2LC0050PQ4
IQI4LC1500PQ4
IQI2LT0100TQ4
IQI4LT1500PQ4
IQI2LC0100PQ4
IQI2LT0050PQ4
IQI2LT0200PQ4
IQI2LT0017TM4
IQI2LT0200TQ4
IQI2LC0017TQ4
IQI2LC0250PQ4
IQI2LT0100PQ4
IQI2LT0050TQ4
IQI4LC0500PQ4
IQI4LT1000TQ4
IQI2LT0017TQ4
IQI2LC0017TM4
IQI4LT1000PQ4

Call for pricing

CARBON FIBER ARTICULATING TORQUE ARM, 7 NM MAX TORQUE, 700MM REACH, BENCH MOUNT

IR TA07B

Carbon Fiber Articulating Torque Arm, 7Nm Max Torque, 700in Reach, Bench Mount

Features And Benefits

Spring balancer adjusts easily and offers effortless vertical movement.
Simple, proven design for easy setup and dependability.
Multiple Torque Options: Available in multiple torque capacities: 2 Nm, 7 Nm, and 19 Nm, to suit a wide range of fastening applications.
Extended Reach: Arm reach options of 500mm, 700mm, and 740mm provide flexibility for various workstation layouts.
Lightweight Carbon Fiber Construction: Select models (TA02B and TA07B) feature carbon fiber arms for reduced operator fatigue and enhanced maneuverability.
Bench Mount Design: All models are bench-mounted, ensuring stability and consistent torque reaction performance.
Compact and Ergonomic: Designed for minimal workspace intrusion while maximizing operator comfort and efficiency.

Product Application and Uses: For use with Ingersoll Rand IQI and QE2 Series Precision Fastening Screwdrivers.
Capacity (lb): 6.6
Max Torque (ft-lb): 5.2
Max Torque (in-lb): 62
Max Torque (nm): 7

For Use With

IQI2LT0250TQ4
IQI2LC0250TQ4
IQI4LT0500TQ4
IQI2LC0050TQ4
IQI2LC0200TQ4
IQI2LT0017PM4
IQI4LC0500TQ4
IQI2LC0017PQ4
IQI2LC0200PQ4
IQI4LT0500PQ4
IQI2LC0100TQ4
IQI2LT0017PQ4
IQI2LT0250PQ4
IQI2LC0017PM4
IQI2LC0050PQ4
IQI2LT0100TQ4
IQI2LC0100PQ4
IQI2LT0050PQ4
IQI2LT0200PQ4
IQI2LT0017TM4
IQI2LT0200TQ4
IQI2LC0017TQ4
IQI2LC0250PQ4
IQI2LT0100PQ4
IQI2LT0050TQ4
IQI4LC0500PQ4
IQI2LT0017TQ4
IQI2LC0017TM4

Call for pricing

Anvil Kit, Hoc Ring/Thru Hole 3/8in Square

IR TK-RTS-626-H6

Anvil Kit, Hoc Ring/Thru Hole 3/8in Square

Call for pricing

IC, 32K ERASABLE ROM

IR T58247-01

IC, 32K ERASABLE ROM

Call for pricing

LAMP

IR T63214-01

LAMP

Call for pricing

PUSHBUTTON

IR T63218-01

PUSHBUTTON

Call for pricing

BLOCK

IR T63221-01

BLOCK

Call for pricing

CABLE

IR T66104-01

CABLE

Call for pricing

BOARD

IR T95007-01

BOARD

Call for pricing

CHARGER, BATTERY 110V T

IR T95301-110T

CHARGER, BATTERY 110V T

Call for pricing

BATTERY, (3.6V) LITHIUM

IR T95323-01

BATTERY, (3.6V) LITHIUM

Call for pricing

ACCESSORY BUSS ASSEMBLY

IR TA-VA1B-212-2

ACCESSORY BUSS ASSEMBLY

Call for pricing

BACK CAP ASSEMBLY, DISPLAY 20V ANGLE

IR TA-VA1T-888-2D

BACK CAP ASSEMBLY, DISPLAY 20V ANGLE

Call for pricing

BACK CAP ASSEMBLY, 20V ANGLE, WIFI6

IR TA-VA1W-888-W2D

BACK CAP ASSEMBLY, 20V ANGLE, WIFI6

Call for pricing

DISPLAY ASSEMBLY, QXN ET

IR TA-VA2-888-NE

DISPLAY ASSEMBLY, QXN ET

Call for pricing

DISPLAY ASSEMBLY (NON-WIRLESS, QXN)

IR TA-VA2-888S-NE

DISPLAY ASSEMBLY (NON-WIRLESS, QXN)

Call for pricing

ACCESSORY BUSS ASSEMBLY

IR TA-VA2B-212-2

ACCESSORY BUSS ASSEMBLY

Call for pricing

BACK CAP ASSEMBLY, 40V ANGLE DISPLAY TYPE

IR TA-VA2B-888-W2D

BACK CAP ASSEMBLY, 40V ANGLE DISPLAY TYPE

Call for pricing

BACK CAP ASSEMBLY, 40V ANGLE, WIFI6

IR TA-VA2W-888-W2D

BACK CAP ASSEMBLY, 40V ANGLE, WIFI6

Call for pricing

HOUSING ASSEMBLY

IR TA-VP1-059-2

HOUSING ASSEMBLY

Call for pricing

GEAR PACK ASSEMBLY 24NM PM

IR TA-VP1-2169-16P

GEAR PACK ASSEMBLY 24NM PM

Call for pricing

QX ANGLE HEAD, ¼" HEX

IR TA-VP1-550-Q4

QX ANGLE HEAD, ¼" HEX

Call for pricing

QX ANGLE HEAD, 3/8" SQ

IR TA-VP1-550-S6

QX ANGLE HEAD, 3/8" SQ

Call for pricing

QX ANGLE HEAD, 3/8" SQ

IR TA-VP1-580

QX ANGLE HEAD, 3/8" SQ

Call for pricing

QXN PISTOL BACK CAP DISPLAY ASSEMBY (NO-WIRELESS)

IR TA-VP1-888-NE

QXN PISTOL BACK CAP DISPLAY ASSEMBY (NO-WIRELESS)

Call for pricing

DISPLAY ASSEMBLY (WIRELESS)

IR TA-VP1-888W-E

DISPLAY ASSEMBLY (WIRELESS)

Call for pricing

ACCESSORY BUSS ASSEMBLY

IR TA-VP1B-212-2

ACCESSORY BUSS ASSEMBLY

Call for pricing

GEAR HEAD ASSEMBLY - 1st STAGE

IR TA-VP1B-216-12

GEAR HEAD ASSEMBLY - 1st STAGE

Call for pricing

GEAR HEAD ASSEMBLY - 2ND STAGE

IR TA-VP1B-216-15

GEAR HEAD ASSEMBLY - 2ND STAGE

Call for pricing

GEARHEAD ASSEMBLY - 2nd STAGE

IR TA-VP1B-216-17P1

GEARHEAD ASSEMBLY - 2nd STAGE

Call for pricing

GEARHEAD ASSEMBLY - 2nd STAGE

IR TA-VP1B-216-26P6

GEARHEAD ASSEMBLY - 2nd STAGE

Call for pricing

SPINDLE ASSEMBLY

IR TA-VP1B-216-39P7

SPINDLE ASSEMBLY

Call for pricing

GEAR HEAD ASSEMBLY 24NM

IR TA-VP1B-216-9

GEAR HEAD ASSEMBLY 24NM

Call for pricing

GEAR HEAD ASSEMBLY - 1st STAGE

IR TA-VP1B-217-15

GEAR HEAD ASSEMBLY - 1st STAGE

Call for pricing

Cable Assembly

IR TA-VP1B-505-4

Cable Assembly

Call for pricing

Transducer Assembly

IR TA-VP1B-756

IR VP1B-756

Transducer Assembly

Call for pricing

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

IR TA-VP1B-888-W2D

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

Call for pricing

GEAR PACK ASSEMBLY

IR TA-VP1T-037-13P18

GEAR PACK ASSEMBLY

Call for pricing

GEAR PACK ASSEMBLY

IR TA-VP1T-037-17P1

GEAR PACK ASSEMBLY

Call for pricing

WIFI CARRIER BOARD ASSEMBLY

IR TA-VP1T-499-4

WIFI CARRIER BOARD ASSEMBLY

Call for pricing

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

IR TA-VP1T-888-2D

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

Call for pricing

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

IR TA-VP1T-888-W2D

BACK CAP ASSEMBLY, DISPLAY 20V PISTOL

Call for pricing

BACK CAP ASSEMBLY, 20V PISTOL, WIFI6

IR TA-VP1W-888-W2D

BACK CAP ASSEMBLY, 20V PISTOL, WIFI6

Call for pricing

SPRING 7.5X27

IR Y-8020-1428-0000

SPRING 7.5X27

Call for pricing

CONICAL SPRING

IR Y-8020-3048-0000

CONICAL SPRING

Call for pricing

WASHER

IR Y-8040-1137-0000

WASHER

Call for pricing

WASHER (16.2X20X3.2)

IR Y-8040-1164-0000

WASHER (16.2X20X3.2)

Call for pricing

WASHER (18X21X3.8)

IR Y-8040-1167-0000

WASHER (18X21X3.8)

Call for pricing

WASHER

IR Y-8040-6023-0000

WASHER

Call for pricing

WASHER

IR Y-8040-6026-0000

WASHER

Call for pricing

WASHER

IR Y-8040-6027-0000

WASHER

Call for pricing

WASHER

IR Y-8040-6028-0000

WASHER

Call for pricing

WASHER

IR Y-8040-6029-0000

WASHER

Call for pricing

WASHER

IR Y-8041-5003-0000

WASHER

Call for pricing

WASHER

IR Y-8041-5006-0000

WASHER

Call for pricing

WASHER

IR Y-8041-5013-0000

WASHER

Call for pricing

WASHER

IR Y-8041-5019-0000

WASHER

Call for pricing

WASHER

IR Y-8041-5022-0000

WASHER

Call for pricing

WASHER (11.5X16X0.3)

IR Y-8041-5026-0000

WASHER (11.5X16X0.3)

Call for pricing

WASHER

IR Y-8041-5032-0000

WASHER

Call for pricing

BOOT

IR Y-0279-0029-0000

BOOT

Call for pricing

SILENCER

IR Y-0280-0053-0099

SILENCER

Call for pricing

THROTTLE LEVER

IR Y-0281-0110-0000

THROTTLE LEVER

Call for pricing

CABLE ASSEMBLY

IR Y-0281-0902-0099

CABLE ASSEMBLY

Call for pricing

REVERSE VALVE

IR Y-0320-0005-0000

REVERSE VALVE

Call for pricing

MOTOR CASE (-0000)

IR Y-0321-0011-0097

MOTOR CASE (-0000)

Call for pricing

MOTOR CASE

IR Y-0321-0011-0098

MOTOR CASE

Call for pricing

MOTOR CASE

IR Y-0321-0011-0199

MOTOR CASE

Call for pricing

BOOT - 1900

IR Y-0321-0029-0000

BOOT - 1900

Call for pricing